Thingiverse
OctoPi Case for Prusa i3 MK2S and MK3 with exposed GPIO ports by ChrisPetit
by Thingiverse
Last crawled date: 4 years, 2 months ago
I just sliced a part away so you can connect to the GPIO contacts...it's the same as this one https://www.thingiverse.com/thing:2334119
The USB cable in the picture is connected to the printer, I needed the GPIO ports for https://www.lisiparoi.com/
I've updated the case to fit M3 or M2.5 bolts through, just pick the lid and base with the corresponding M notation. M2.5 wont grind into your Rpi board...O, and do not overthigten.
---Update---
The MK3 frame is a little bit narower, so I've reworked the lids for the MK3
---Source Files---Base_Rasp2Base_Rasp2_Nut_M2.5Base_Rasp2_Nut_M3Lid MK2Lid_MK3Lid_MK3_nut_m2.5 v4Lid_MK3_nut_m3 v1Lid_nut_m2.5Lid_nut_m3
The USB cable in the picture is connected to the printer, I needed the GPIO ports for https://www.lisiparoi.com/
I've updated the case to fit M3 or M2.5 bolts through, just pick the lid and base with the corresponding M notation. M2.5 wont grind into your Rpi board...O, and do not overthigten.
---Update---
The MK3 frame is a little bit narower, so I've reworked the lids for the MK3
---Source Files---Base_Rasp2Base_Rasp2_Nut_M2.5Base_Rasp2_Nut_M3Lid MK2Lid_MK3Lid_MK3_nut_m2.5 v4Lid_MK3_nut_m3 v1Lid_nut_m2.5Lid_nut_m3