Thingiverse
Oblivion Pro Remastered FPV Racing Frame by MarcRuhl
by Thingiverse
Last crawled date: 4 years, 5 months ago
This is the Oblivion Pro Remastered inspired by the indestructable design of the TBS Oblivion. Unlike the TBS Oblivion or the Oblivion Pro it only comes with a Top Plate due to compability problems. This ensures that you will be able to put most of the common FPV hardware on to the frame.
In order to make the Frame as rigid as possible, I had to bring its weight up signifficantly, so its coming in at ~110-120G. When you print it with lower infill you may be able to get it under 100g, excluding hardware.
Update 10.8.2018: Added Bottom Plate Versions from 6-8mm in order to reduce weight
If you have any Questions or Suggestions, feel free to comment and I will do my best doing changes or anything like that.
To make it complete: "Sorry for my bed England"
In order to make the Frame as rigid as possible, I had to bring its weight up signifficantly, so its coming in at ~110-120G. When you print it with lower infill you may be able to get it under 100g, excluding hardware.
Update 10.8.2018: Added Bottom Plate Versions from 6-8mm in order to reduce weight
If you have any Questions or Suggestions, feel free to comment and I will do my best doing changes or anything like that.
To make it complete: "Sorry for my bed England"