Thingiverse
NZXT H510 elite spacer for glass side panel
by Thingiverse
Last crawled date: 5 years, 2 months ago
Still experimenting with this mod, but basically it adds a small gap near the top.
I had my GPU arranged vertically, and the fans were almost touching the glass panel. Looking at temps, they went up to 84-85C on my GPU after 5 minutes
So adding this seems to drop the temp to around 80C
I may try further distances to see how much will help cooling. But you can try this if you want. I printed it at 100% infill, just to be safe. The holes barely reach, but it does hold once they screw in.
I had my GPU arranged vertically, and the fans were almost touching the glass panel. Looking at temps, they went up to 84-85C on my GPU after 5 minutes
So adding this seems to drop the temp to around 80C
I may try further distances to see how much will help cooling. But you can try this if you want. I printed it at 100% infill, just to be safe. The holes barely reach, but it does hold once they screw in.