Thingiverse
Nozzle Holder Case Ultra by Photogad
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a printable nozzle holder case that can hold up to 20 nozzles, for the man or woman that has lots of nozzles.
This is inspired off of the E3D Nozzle Holder by 3D previews.
FEATURES:
Holds up to 20 nozzles.
Indented separator between the top 10 and bottom 10 nozzles, with the idea you can store your regular brass nozzles and your specialty nozzles (such as hardened steel or vanadium) separately.
Has a sliding cover that locks into place magnetically to keep your nozzles safe.
Nozzles screw into the holder with an appropriate thread and will not fall out.
Has an optional multi-material (MMU) compatible design for the cover.
Has an optional Slice Engineering™ Nozzle Wrench holder which also magnetically locks into place.
Note: Slice Engineering Nozzle Wrench only works with Slice Engineering nozzles. I highly recommend their nozzles.
UPDATES:
2/26/2021
I further improved the tolerances on all the parts so that if you are slightly overextruding, the parts will not bind on each other. Everything should work much better now mechanically.
I modified the MMU cover to print better, the letters/nozzle graphic are no longer recessed, and they will print flat on the bed for higher quality. I added some photos of the printed part in multimaterial BEFORE this improvement.
2/25/2021
Added a non-threaded variant for the case, if by chance you do not want to have to thread the nozzles in. This will be less secure but easier to store and retrieve the nozzles. Now the .STL files are called “Case Threaded” and “Case NoThread”.
After lots of testing, I decided single 6x3mm magnets are not strong enough to securely hold the Slice Nozzle Wrench in place. So now the magnet pockets are deeper that you may place two 6x3mm magnets into each nozzle wrench bracket pockets. I also adjusted the tolerances of the nozzle wrench brackets so that they fit a bit tighter.
I also felt the cover did not latch securely enough, so I also deepened the magnet pockets on the case, so you can stack two 6x3mm magnets in each pocket.
I compiled the two Slice Nozzle Wrench brackets into one .STL file.
SUGGESTED PARTS NEEDED:
SIX 6x3mm Neodymium magnets if you are not going to use the Slice Nozzle Wrench Holder.
TEN 6x3mm Neodymium magnets if you ARE going to use the Slice Nozzle Wrench Holder.
(So that's six total magnets or 10 total magnets)
PRINT THESE FILES:
If you want single color prints:
Case Threaded.stl if you want threaded nozzle holder, OR:
Case NoThread.stl if you do not want threaded nozzle holder.
Cover.stl
If you want multicolor cover:
Cover MMU 1.stl
Cover MMU 2.stl
Cover MMU 3.stl
PLACE THE THREE COVER FILES INTO PRUSASLICER AT THE SAME TIME AND IT SHOULD RECOGNIZE IT AS A MMU PRINT.
For some reason my CAD software refuses to export this in the correct orientation, you will need to rotate the model upside down in PrusaSlicer and print it flat on the bed.
If you want optional Slice Nozzle Wrench holder:
SliceNW Holder.stl
HOW TO ASSEMBLE THE CASE/COVER:
Put two 6x3 magnets together. Add some superglue to the bottom of them, and put them into the first magnet pocket on the top ledge of the case.
Repeat the above step for the other magnet pocket on the other side of the case.
Add some superglue to a 6x3 magnet and put it into a magnet pocket on the bottom of the cover. MAKE SURE YOU INSERT THE MAGNETS WITH THE CORRECT POLARITY. The ones in the cover need to “attract” the ones in the case.
Repeat the above step for the other magnet pocket on the opposite side of the cover.
Do not put cover on the case for at least 1 hour to let superglue dry.
HOW TO ASSEMBLE OPTIONAL NOZZLE WRENCH HOLDER:
Put two 6x3 magnets together. Add some superglue to the bottom of them, and put them into the first magnet pocket on the bottom of one Slice Nozzle Wrench Holder bracket. Polarity of magnet does not matter.
Repeat above step for other Slice Nozzle Wrench Holder bracket.
Let superglue on magnets dry for at least 1 hour.
Now put superglue on the bottom of the printed brackets and place them into the pockets on the left side of the cover, with the cover laying down on a flat surface on the opposite side. Let dry for at least 1 hour before placing Slice Nozzle Wrench into the holder.
HOW TO USE:
Screw the nozzles into their holes in the case.
Un-screw the nozzles out of their holes in the case.
Always let nozzles cool to room temperature before screwing them into the case.
If you would like to modify this to create your own non-Slice nozzle wrench holder, I have included the .STEP file in the downloads section.
If you're absurdly rich and want to support a poor guy like me in my 3D printing and photography endeavors, check out my Patreon:https://www.patreon.com/photogad
This is inspired off of the E3D Nozzle Holder by 3D previews.
FEATURES:
Holds up to 20 nozzles.
Indented separator between the top 10 and bottom 10 nozzles, with the idea you can store your regular brass nozzles and your specialty nozzles (such as hardened steel or vanadium) separately.
Has a sliding cover that locks into place magnetically to keep your nozzles safe.
Nozzles screw into the holder with an appropriate thread and will not fall out.
Has an optional multi-material (MMU) compatible design for the cover.
Has an optional Slice Engineering™ Nozzle Wrench holder which also magnetically locks into place.
Note: Slice Engineering Nozzle Wrench only works with Slice Engineering nozzles. I highly recommend their nozzles.
UPDATES:
2/26/2021
I further improved the tolerances on all the parts so that if you are slightly overextruding, the parts will not bind on each other. Everything should work much better now mechanically.
I modified the MMU cover to print better, the letters/nozzle graphic are no longer recessed, and they will print flat on the bed for higher quality. I added some photos of the printed part in multimaterial BEFORE this improvement.
2/25/2021
Added a non-threaded variant for the case, if by chance you do not want to have to thread the nozzles in. This will be less secure but easier to store and retrieve the nozzles. Now the .STL files are called “Case Threaded” and “Case NoThread”.
After lots of testing, I decided single 6x3mm magnets are not strong enough to securely hold the Slice Nozzle Wrench in place. So now the magnet pockets are deeper that you may place two 6x3mm magnets into each nozzle wrench bracket pockets. I also adjusted the tolerances of the nozzle wrench brackets so that they fit a bit tighter.
I also felt the cover did not latch securely enough, so I also deepened the magnet pockets on the case, so you can stack two 6x3mm magnets in each pocket.
I compiled the two Slice Nozzle Wrench brackets into one .STL file.
SUGGESTED PARTS NEEDED:
SIX 6x3mm Neodymium magnets if you are not going to use the Slice Nozzle Wrench Holder.
TEN 6x3mm Neodymium magnets if you ARE going to use the Slice Nozzle Wrench Holder.
(So that's six total magnets or 10 total magnets)
PRINT THESE FILES:
If you want single color prints:
Case Threaded.stl if you want threaded nozzle holder, OR:
Case NoThread.stl if you do not want threaded nozzle holder.
Cover.stl
If you want multicolor cover:
Cover MMU 1.stl
Cover MMU 2.stl
Cover MMU 3.stl
PLACE THE THREE COVER FILES INTO PRUSASLICER AT THE SAME TIME AND IT SHOULD RECOGNIZE IT AS A MMU PRINT.
For some reason my CAD software refuses to export this in the correct orientation, you will need to rotate the model upside down in PrusaSlicer and print it flat on the bed.
If you want optional Slice Nozzle Wrench holder:
SliceNW Holder.stl
HOW TO ASSEMBLE THE CASE/COVER:
Put two 6x3 magnets together. Add some superglue to the bottom of them, and put them into the first magnet pocket on the top ledge of the case.
Repeat the above step for the other magnet pocket on the other side of the case.
Add some superglue to a 6x3 magnet and put it into a magnet pocket on the bottom of the cover. MAKE SURE YOU INSERT THE MAGNETS WITH THE CORRECT POLARITY. The ones in the cover need to “attract” the ones in the case.
Repeat the above step for the other magnet pocket on the opposite side of the cover.
Do not put cover on the case for at least 1 hour to let superglue dry.
HOW TO ASSEMBLE OPTIONAL NOZZLE WRENCH HOLDER:
Put two 6x3 magnets together. Add some superglue to the bottom of them, and put them into the first magnet pocket on the bottom of one Slice Nozzle Wrench Holder bracket. Polarity of magnet does not matter.
Repeat above step for other Slice Nozzle Wrench Holder bracket.
Let superglue on magnets dry for at least 1 hour.
Now put superglue on the bottom of the printed brackets and place them into the pockets on the left side of the cover, with the cover laying down on a flat surface on the opposite side. Let dry for at least 1 hour before placing Slice Nozzle Wrench into the holder.
HOW TO USE:
Screw the nozzles into their holes in the case.
Un-screw the nozzles out of their holes in the case.
Always let nozzles cool to room temperature before screwing them into the case.
If you would like to modify this to create your own non-Slice nozzle wrench holder, I have included the .STEP file in the downloads section.
If you're absurdly rich and want to support a poor guy like me in my 3D printing and photography endeavors, check out my Patreon:https://www.patreon.com/photogad
Similar models
thingiverse
free
Pinecil and Tips Magnet Case by egrims
...r any other super glue at the bottom of the pocket before placing the magnet to avoid rattling and would suggest you do the same.
thingiverse
free
E3D V6 - Nozzle Holder with Wrench by mhendricks
...mhendricks
thingiverse
i wanted the nozzle cover to also hold in the wrench so i added a small square on the side to hold it in.
thingiverse
free
Brain Slice Incubator v3 by xenodius
...he magnets in place, they should stay down unless if you have a brass nozzle but my hardened nozzlex sucked them up my first try.
thingiverse
free
Customizable Hex Bit Holder with Magnet Slot by polldav
...g too much. magnets should not fall out because they have a dedicated pocket and even without the glue it's a very tight fit.
thingiverse
free
WLANThermo Nano V1+ Pro Case mod by Nigggo
...n print the bottom case with the logo embedded or print the logo in accent color and the case with the logo left out ontop of it.
thingiverse
free
Wrench Holder - Magnetic by jdemustang
...es in the liner to allow the magnets to reach the metal surface. the magnet height and drawer liner height are almost identical.
thingiverse
free
Magnetic 4mm screw bits holder by Motozappa
...ngle holder and flip them from one holder to another in order to make them stick properly.
cad files are included in the download
thingiverse
free
Jet or E3D Nozzle holder by Virus2k20
...ere your actual nozzle comes from.
markierung_aktuelle_spitze_v1.stl ... is the making pin
spitzenhalter_v1.stl ... is the holder
thingiverse
free
Hex bit finger wrench by Klave
...tool holder so i can easily place and remove it. i also put a magnet in the wrench top to stick it to the nearest piece of steel.
thingiverse
free
Print in place hinged dice case (With Magnets!)
...glue underneath. may try to update with slightly larger holes.
printed at .2 in pla. sliced in cura, and printed on ender 3 pro.
Photogad
thingiverse
free
Heater Knob by Photogad
...heater knob by photogad
thingiverse
heater knob
thingiverse
free
Pen and Whiteout Holder by Photogad
...pen and whiteout holder by photogad
thingiverse
holds a standard sized pen and the white-out-on-a-roll.
thingiverse
free
18650 Battery Holder x6 by Photogad
...18650 battery holder x6 by photogad
thingiverse
will hold six 18650 batteries.
thingiverse
free
Mini Great Pyramid of Giza by Photogad
...mini great pyramid of giza by photogad
thingiverse
a miniature great pyramid of giza.
thingiverse
free
Impossible Printing Test Object by Photogad
...impossible printing test object by photogad
thingiverse
if you can print this, you have a really good 3d printer.
thingiverse
free
Pipe Accessory for iTaste ecig battery by Photogad
...pipe accessory for itaste ecig battery by photogad
thingiverse
pipe accessory for itaste ecig battery
thingiverse
free
Ultimate Single Pen Holder by Photogad
...ultimate single pen holder by photogad
thingiverse
fits most standard sized pens. display your pen on your desk with pride!
thingiverse
free
eGo ECIG Battery and Juice Holder by Photogad
...ego ecig battery and juice holder by photogad
thingiverse
fits ego sized batteries and various sized bottles of juices
thingiverse
free
Over the door Hook for towels by Photogad
...erse
towel hook for over your bathroom door (or any door.)
doorhook1.stl is for thicker doors
doorhook2.stl is for thinner doors
thingiverse
free
Ribbon & String Cutting Jig by Photogad
...naments that had ribbons. she made thousands of them. guess whose job it was to cut ribbons for them, all at the same length? me.
Nozzle
3d_export
$5
nozzle
...nozzle
3dexport
3d_export
$49
fuel nozzles
...fuel nozzles
3dexport
fuel nozzles 3d model. include max, obj, fbx files.
archive3d
free
Nozzle 3D Model
...archive3d
nozzle hair-drier ware
nozzle - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$25
Pirouette Nozzle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Fuel Nozzle
...model fuel nozzle for download as c4d, fbx, obj, 3ds, and stl on turbosquid: 3d models for games, architecture, videos. (1672732)
turbosquid
$8
Aeration Nozzles
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
laval airjet nozzle
...laval airjet nozzle
3dexport
a simple modified laval nozzle (airjet shooter) for sorting purposes.
3d_export
$36
Gas nozzle 3D Model
... 3d model
3dexport
gas pump nozzle dispenser filling station petrol fuel spout tank gun
gas nozzle 3d model tartino 1945 3dexport
turbosquid
$10
Diecast Jet nozzle
... free 3d model diecast jet nozzle for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1425990)
turbosquid
$39
Rocket nozzle, supressor.
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Holder
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Ultra
3ddd
$1
ultra
...ultra
3ddd
ultra , кресло
офисное кресло руководителя, модель ultra
3ddd
$1
Стол Ultra
...стол ultra
3ddd
ogogo
стол ultra, интернет магазина ogogo обстановочка.
turbosquid
$10
ULTRA CHAIR_COMFORT
...royalty free 3d model ultra chair_comfort for download as max on turbosquid: 3d models for games, architecture, videos. (1256242)
turbosquid
$8
Ultra Bot
...urbosquid
royalty free 3d model ultra bot for download as ma on turbosquid: 3d models for games, architecture, videos. (1330752)
turbosquid
$3
Ultra Ball
...
royalty free 3d model ultra ball for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1510206)
turbosquid
$2
Ultra Greatsword
...ty free 3d model ultra greatsword for download as 3ds and fbx on turbosquid: 3d models for games, architecture, videos. (1238281)
3ddd
$1
Galaxy Ultra
... ultra
реальная модель из жизни, текстуры в архиве есть, также имеется файл для макса 2010-го
turbosquid
$12
Ultra WebCam
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Ultra Ball
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Ultra AP
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.