NODE MCU V3 Case with OLED 1,3" Display - ESP8266 Universal Desktop Case 3d model
3dmdb logo
Thingiverse
NODE MCU V3 Case with OLED 1,3" Display - ESP8266 Universal Desktop Case

NODE MCU V3 Case with OLED 1,3" Display - ESP8266 Universal Desktop Case

by Thingiverse
Last crawled date: 5 years, 4 months ago
This is a little desktop case for a ESP8266 NODE MCU V3 Board, and a 1.3" OLED Display.
The backplate is supplied in three differnt versions:
With hole for a DHT22 Temperature/Humidity Sensor
With mounting points for Adafruit Breakout Boards like the BME280
With a closed back
There is a lot of space inside the case, so no problem to add more stuff.
All parts print without any support in the shown orientation.
Assembly Instructions:
The OLED display is press-fit. It can be secured with two little drops of Cyano-glue or similar glue.
The NODE MCU board is press-fit into the slots inside the case, pins are directed upwards.
The two parts of the case are screwed together with M2,5*8 screws from the bottom and the back.

Tags