Thingiverse
No drip, motorcyle chain luber by pbarrios
by Thingiverse
Last crawled date: 3 years, 2 months ago
Magnets keep pan and luber together for when you want to lube your motorcycle chain and not make a mess. I designed this for the stock chain of a 2005 Honda Rebel (520x108).
The spout for the pan was redesigned for better pouring into waste container.
I used rare earth magnets for a strong hold on both the luber and the pan. I don't think it is needed. You could have a metal disk on one of them and a rare earth magnet on the other side.
Make sure that any solvents you may have used to clean the chain have long dried up or they may dissolve the luber as, in my case, it was made of ABS.
Print as shown in image #5, not as shown on STL files.
I usually have to scale by 10 all my drawings when they go into my slicer. It maybe because I draw them in mm and slicers may expect cm.
April 18, 2021 Added catch pan with flat bottom to prevent oil spills when setting it down on the floor or on flat surface.
The spout for the pan was redesigned for better pouring into waste container.
I used rare earth magnets for a strong hold on both the luber and the pan. I don't think it is needed. You could have a metal disk on one of them and a rare earth magnet on the other side.
Make sure that any solvents you may have used to clean the chain have long dried up or they may dissolve the luber as, in my case, it was made of ABS.
Print as shown in image #5, not as shown on STL files.
I usually have to scale by 10 all my drawings when they go into my slicer. It maybe because I draw them in mm and slicers may expect cm.
April 18, 2021 Added catch pan with flat bottom to prevent oil spills when setting it down on the floor or on flat surface.
Similar models
thingiverse
free
Magnetic Toy Blocks by dw2364
... holds better.
please note: although the superglue holds very well, rare earth magnets are still dangerous around little kids.
thingiverse
free
Magnetic parts bold with embedded magnets. by TLRobb
...int and let it finish.
parts needed:
4 round magnets that measure 9.54mm in diameter and 1.53mm thick. i got mine at home depot.
thingiverse
free
Max the Dog Fridge Magnet rotated correctly. by MacGyver
...rse
i ordered some rare earth magnets a few years back and wanted to make use of them. 9.5mm x 1.63mm round magnets should fit.
thingiverse
free
Magnetic Keyring Key Chain EDC Rare Eath Neodymium Magnet holder by That3DPrintGuy
...ring. use a tiny drop or epoxy glue or similar to hold the magnets. i bought 50 of the...
thingiverse
free
D&D dice and figure box
....
i wanted more space to hold the dice and a place for a pen. the box lid also serve as a dice tray.
it's only two parts now.
thingiverse
free
Magnetic Building Board Jigs by archiea67
...ue will help. be mindful of the polarity so you can stack your jigs when not in use.
enjoy your building on a magnetic table!!
thingiverse
free
Magnetic Flat Fish by squbel
...my replicator 2x.
resolution 0.2mm, 2 shells, 10% infill.
i will add the link to other creatures once all files are uploaded.
thingiverse
free
Magnetic Thumbtacks by DanLuc
... i use to hold drawings on various surfaces for work. so i decided to make them eassier to work with and made the holder for them
thingiverse
free
Curtain rod bracket by pbarrios
...ly have to scale by 10 all my drawings when they go into my slicer. it maybe because i draw them in mm and slicers may expect cm.
thingiverse
free
Motorcycle chain luber - 525 by Jimmykarlsson98
...motorcycle chain luber - 525 by jimmykarlsson98
thingiverse
chain luber accesory for 525 motorcycle chain
Luber
thingiverse
free
Motorcycle chain luber - 525 by Jimmykarlsson98
...motorcycle chain luber - 525 by jimmykarlsson98
thingiverse
chain luber accesory for 525 motorcycle chain
thingiverse
free
Direct Feed top for Creative Tools filament filter. by funkshin
...the hose. i left a little cup for the luber. ...
thingiverse
free
Motorcycle Control Cable Lubricator
...down the control cable. design is 4 parts: cable luber bottom.stl - base that slides over control cable and...
thingiverse
free
LMU Bearing Grease Packer by Thomllama
...be printed and used with all version of the luber just add a m4 screw. screw will bottom out...
grabcad
free
SEA-GATE - Luber
...ad
disc luber machine compliant to clean-room class 10 standard in operation area, c/w 1 set diving board and 1 set disc holder.
3dwarehouse
free
Zorocan
...el palacio de los tennis, entre otros. #el_palacio_de_los_tennis #hotel_zorocan #luber #mayalopz...
Pbarrios
thingiverse
free
Sink strainer/filter ... another design. by pbarrios
...design. by pbarrios
thingiverse
another design of sink strainer. it looks nice and it doesn't accumulate water around edges.
thingiverse
free
Curtain rod bracket by pbarrios
...ly have to scale by 10 all my drawings when they go into my slicer. it maybe because i draw them in mm and slicers may expect cm.
thingiverse
free
Gasket for 7-inch opening ceramic jug (water dispenser) by pbarrios
...o be scaled by 10 to get proper dimensions.
it could be scaled or reduced in from there in xy to fit your particular jug opening.
thingiverse
free
Strap buckle for loop at end of leash by pbarrios
...ly have to scale by 10 all my drawings when they go into my slicer. it maybe because i draw them in mm and slicers may expect cm.
thingiverse
free
Lid/cover for 750ml rectangular Pyrex container by pbarrios
..., but it should print just fine. i do have the design without the watermark for anyone who is kind enough to tip.
happy printing.
thingiverse
free
Bracket for mounting tachometer on 2005 Honda Rebel by pbarrios
...ly have to scale by 10 all my drawings when they go into my slicer. it maybe because i draw them in mm and slicers may expect cm.
thingiverse
free
Knife handle for 1 screw blade by pbarrios
...ly have to scale by 10 all my drawings when they go into my slicer. it maybe because i draw them in mm and slicers may expect cm.
thingiverse
free
Kong drying station for laundry tub by pbarrios
...ongs are : 220x50x48 mm3
the dimensions for the support arm are: 112x18x15 mm3
the dimensions for the dove tail are: 33x8x2.5 mm3
thingiverse
free
Centrifugal compressor wheel for "centrifugal compressor by TanyaAkinora" by pbarrios
.....
(the fan's case in the video was obtained from: centrifugal compressor with bearing support and screw holes by psaintmalo)
Motorcyle
3d_ocean
$15
Military Modern War Motorcycle (Blue)
...motorcycle (blue) 3docean armored blue car military modern moto motorcyle ravegan sidecar vehicle war weapon textured lowpoly model of...
3d_export
$5
Motorcycles prohibited 3D Model
...motorcycles prohibited 3d model 3dexport motorcyle prohibited entrance access sign street parking speed limit pole...
free3d
free
Ducati Motorcyle
...ducati motorcyle
free3d
ducati motorcycle
unity_asset_store
$5
OLD SCI-FI MOTORCYLE
... your workflow with the old sci-fi motorcyle asset from ake. find this & other vehicles options on the unity asset store.
thingiverse
free
Motorcyle Mirror Caps by gibberishforausername
... mirrors on my honda rc51, i made them for my race bodywork. i'd suspect they would work on other hondas, but i have no idea.
3dcadbrowser
free
Clutch Motorcyle 3D CAD Model
...3d object can be downloaded in .step, .iges, .max, .obj, .3ds, .fbx, .dxf, .lwo, .stl, .wrl, .ma, .dae, .x and .asc file formats.
thingiverse
free
Motorcyle Throttle Lock by dmai
...olt (20mm) and a standard nut. use stainless of course.
if you decide to try one of these, please take pic and share it?? thanks!
thingiverse
free
Seitenständerunterlage - Side stand pad Suzuki DR by pschaffrinski
...suzuki dr 800, but should also fit to other motorcyle ...
thingiverse
free
OSSA Motorcycle Logo
...ossa motorcycle logo thingiverse ossa famous spanish motorcyle manufacturer, especially well known in the classic trial community....
Drip
3ddd
$1
Paint drip table
...paint drip table
3ddd
john nouanesing
paint drip table by john nouanesing.
turbosquid
$59
Drip marker
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Drip Stand
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Drip Stand
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Drip stand
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Drip Stand
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Oups Dripping Lamp
...овый и неожиданный дизайн торшера от nathalie be под названием oups dripping lamp напоминает ведерко, из которого вытекает краска
turbosquid
$10
Drip Coffee Maker
...el drip coffee maker for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1441174)
turbosquid
$10
Rebuildable Dripping Atomizer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Часы Big Drip Modern Wall Clock
... big drip , настенные
часы настенные big drip modern wall clock.
диаметр 50 см.
Chain
archibase_planet
free
Chain
...chain
archibase planet
chain chain link chain loop
chain n020708 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
chain
...chain
3dexport
3d model chain
3d_export
$5
chain
...chain
3dexport
chain. obj,fbx,blend
archibase_planet
free
Chain
...se planet
chain circuit catena
chain - archicad parametrical gdl 3d model (*.gsm). regulation of the length, curvature and angle.
archibase_planet
free
Chain
...n
archibase planet
chain circuit catena
chain - archicad parametrical gdl 3d model(*.gsm). regulation of the length and angle xyz
3d_ocean
$5
Chain
...chain
3docean
3d models chain design elements
3d models, design elements
3d_ocean
$5
Chain
...chain
3docean
3d models chain design elements
3d models, design elements
turbosquid
$10
Chain
...hain
turbosquid
royalty free 3d model chain for download as on turbosquid: 3d models for games, architecture, videos. (1329200)
turbosquid
$9
chain
...hain
turbosquid
royalty free 3d model chain for download as on turbosquid: 3d models for games, architecture, videos. (1549461)
turbosquid
$2
Chain
...hain
turbosquid
royalty free 3d model chain for download as on turbosquid: 3d models for games, architecture, videos. (1148668)