Thingiverse
No drill Hailong Battery Mounting Plate by locnhinho
by Thingiverse
Last crawled date: 3 years, 1 month ago
No drill Hailong Battery Mounting Plate
Hailong battery case mounting plate without drill. Require 2 3/4" hose clamp and M5 screw (length 8 mm).
Instruction:
Get yourself a steel plate, copper bar, or aluminum bar of size 3x15x37mm. Or you can get this - https://www.homedepot.com/p/Simpson-Strong-Tie-HRS-12-in-12-Gauge-Galvanized-Heavy-Strap-Tie-HRS12/100375113 and cut it in width of 15mm.
After you printed the no drill Hailong battery mounting plate, insert the steel bar into the slot.
Now, you need to tap the M5 hole. To do this, use the "Hailong Battery Mounting Plate Drill Guide" printed model as drilling guide. This provides straight guide to drill through the steel plate. Use drill bit 4.2mm and drill through the guide. There are two holes - one smaller and one bigger. Use the smaller hole with the 4.2mm drill bit.
To tap, swap to the larger hole guide and tap over the larger hole. This provides straight 90 degree tap. As for tap, follow tap instruction. (Here is a cheap $10 tap set - https://www.amazon.com/gp/product/B06X9YV16Z/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1)
How to mount on bike:
To mount, use 2 3/4" hose clamp.
To avoid scratch, use heat shrink wrap with the clamp. 5/8" heat shink wrap should work.
Please note that there is also an mount plate for use with the existent bottle hole.
Hailong battery case mounting plate without drill. Require 2 3/4" hose clamp and M5 screw (length 8 mm).
Instruction:
Get yourself a steel plate, copper bar, or aluminum bar of size 3x15x37mm. Or you can get this - https://www.homedepot.com/p/Simpson-Strong-Tie-HRS-12-in-12-Gauge-Galvanized-Heavy-Strap-Tie-HRS12/100375113 and cut it in width of 15mm.
After you printed the no drill Hailong battery mounting plate, insert the steel bar into the slot.
Now, you need to tap the M5 hole. To do this, use the "Hailong Battery Mounting Plate Drill Guide" printed model as drilling guide. This provides straight guide to drill through the steel plate. Use drill bit 4.2mm and drill through the guide. There are two holes - one smaller and one bigger. Use the smaller hole with the 4.2mm drill bit.
To tap, swap to the larger hole guide and tap over the larger hole. This provides straight 90 degree tap. As for tap, follow tap instruction. (Here is a cheap $10 tap set - https://www.amazon.com/gp/product/B06X9YV16Z/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1)
How to mount on bike:
To mount, use 2 3/4" hose clamp.
To avoid scratch, use heat shrink wrap with the clamp. 5/8" heat shink wrap should work.
Please note that there is also an mount plate for use with the existent bottle hole.
Similar models
thingiverse
free
Hailong Battery Mounting Plate by locnhinho
... repeat for the other two holes if required.
please note that there are two versions - one for 50mm frame and one for 40mm frame.
thingiverse
free
XT60 Hailong Battery Case Mount by locnhinho
...g 3mm or 1/8" drill bit, drill a second time.
insert the xt60 housing
using two m3 8mm length screw, screw in the two screws
thingiverse
free
2040 Aluminum Extrusion DRILL Helpers by XRT9
... you will need a m5x45mm.
only left sides were uploaded. to use on right side use your "mirror" function in your slicer
thingiverse
free
Bafang Hailong battery holder by illbe
... hose clamps + m5 nuts + m5x16 or 20 screws.
designed for bike frame of diam 50mm but can be modified to fit your frame.
thanks !
thingiverse
free
Bafang Hailong battery support by illbe
... hose clamps + m5 nuts + m5x16 or 20 screws.
designed for bike frame of diam 50mm but can be modified to fit your frame.
thanks !
thingiverse
free
Gopro bicycle seat mount by Ktronik
... drilled the larger base.....and with a m5 bolt, i tapped the smaller top plate....you could also drill it thru and use a nut....
thingiverse
free
Bike chain guard Shimano 44T 104mm by Jimbob
...and mount with 4 20mm x m5 screws.
(i used a 4.2mm drill to open out the existing holes on the sprocket nuts then used a m5 tap)
thingiverse
free
Floating nutplate drill guide
...floating nut plates. drill the center hole to locate the position then insert the guide, index it, and drill the mounting holes.
thingiverse
free
Elektra Beckum BAS315/4 Dust Collection Shroud by leonardlowe
...e opening and screw the shroud in place.
https://www.thingiverse.com/thing:3283749 is a great addition to hold the hose in place.
thingiverse
free
Aircraft drill guide block by hchadda
...rcraft drill guide block by hchadda
thingiverse
aircraft drill guide block, used with steel inserts for drilling straight holes.
Hailong
thingiverse
free
Hailong Battery Bike Mount
...s made for the main battery or for a second one you want to swap.
.... this is made by william woodner aka all about woodner ....
thingiverse
free
Hailong eBike Battery Wall mount
...sh e-bike cargobike delight. it should also work with other manufacturers that use the hailong battery, like seaside for example.
thingiverse
free
Schwinn Shuffle Hailong Battery Mount by rsoko
...ilong battery pack mount.
i used these ziptie mounts and made my own battery case mount:https://www.thingiverse.com/thing:4698614
thingiverse
free
Bracket for Hailong Battery case by Xerg
...s limited to apprx 20cm. glued with epoxy resin and reinforced with several strands of carbon roving on the inner- and underside.
thingiverse
free
XT60 Replacement for DC2.1mm Hailong Case by locnhinho
...ject some hot glue into the two small holes
for the xt60 cover, get it from this one - https://www.thingiverse.com/thing:4793612.
thingiverse
free
Hailong battery bracket - fitting and strain relief by fluffgummi
...ic hole where the cables come out.
to remedy this i printed a fitting for the hole/cable exit and a strain relief for the cables.
thingiverse
free
Hailong Battery Mount for Schwinn Shuffle by rsoko
... make fit my dimensions: https://www.thingiverse.com/thing:4698614 (sorry wouldn't let me say it was a remix for some reason)
thingiverse
free
XT60 Hailong Battery Case Mount by locnhinho
...g 3mm or 1/8" drill bit, drill a second time.
insert the xt60 housing
using two m3 8mm length screw, screw in the two screws
thingiverse
free
Hailong Battery Mounting Plate by locnhinho
... repeat for the other two holes if required.
please note that there are two versions - one for 50mm frame and one for 40mm frame.
Locnhinho
thingiverse
free
Monticello by locnhinho
...the hall
increase the wall to 1.2mm
shift the dome to not touch the wall due to wall increase to 1.2mm
pull out the windows a bit
thingiverse
free
Castle by locnhinho
... top surface, extrude down to base
fix and enlarge the flag
inscribe "castle by alyssa ho 4th grade 2021" at the bottom
thingiverse
free
Protector for Polaris D30 UWF Quick Disconnect by locnhinho
...designed this to protect it from getting broken. if you want to buy one, look at this link https://www.ebay.com/itm/193622399518.
thingiverse
free
XT60 Replacement for DC2.1mm Hailong Case by locnhinho
...ject some hot glue into the two small holes
for the xt60 cover, get it from this one - https://www.thingiverse.com/thing:4793612.
thingiverse
free
Bafang Wire Housing for Bike Hand Bar by locnhinho
... look nice:
sand it with 240, 120, and 400
spray paint
included the fusion 360 file so that you can modify it for your fork size.
thingiverse
free
Polaris Wheel Nut by locnhinho
...replacement. see polaris 280 small wheel holder.stl and image attached. you will need an m5 hex nut as well as a longer m5 screw.
thingiverse
free
Ego Battery Adapter to XT60 by locnhinho
...solder. heat up the plate first add a blob of solder. then joint with the wire.
on the other end, solder to xt60 female connector
thingiverse
free
Raspberry PI Zero Camera Mount for Flying Bear P905 by locnhinho
... 50mm fan blower, it now touched the 50mm fan blower. as such, added second version to move the camera out by 0.5" or 13 mm.
thingiverse
free
Hailong Battery Mounting Plate by locnhinho
... repeat for the other two holes if required.
please note that there are two versions - one for 50mm frame and one for 40mm frame.
thingiverse
free
Dual mosfet for Flying Bear P905 by locnhinho
...rilla mosfet
you can use 3mm screw with nut to mount the bracket to the mosfet mounting plate. or use those computer disk screw.
Drill
thingiverse
free
Drill holder
...drill holder
thingiverse
drill holder for metric drills.
thingiverse
free
drill by Syzguru11
...drill by syzguru11
thingiverse
drill
thingiverse
free
drill by Syzguru11
...drill by syzguru11
thingiverse
drill
thingiverse
free
Drill by redkidpavel
...drill by redkidpavel
thingiverse
the drill
thingiverse
free
Handheld Drill
...handheld drill
thingiverse
this handheld drill should fit any normal drill bit.
thingiverse
free
Drill by raikayl
...drill by raikayl
thingiverse
drill model
thingiverse
free
Drills storage
...drills storage
thingiverse
drills storage on the wall.
thingiverse
free
Breaching drill
...breaching drill
thingiverse
hades breaching drill model.
thingiverse
free
Drill Bit Clip for Power Drills by danielferal
...drill bit clip for power drills by danielferal
thingiverse
bit holder that attaches to your drill.
thingiverse
free
Drill Tray
...to allow shaking without dropping drills over edges. also includes a spout for easy placing drills back into original containers.
Battery
thingiverse
free
Battery Container - (Battery Shaped)
...ttery shaped)
thingiverse
a battery container in the shape of a chunky battery. it contains up to 4 aaa batteries and 5 aa ones.
thingiverse
free
FT009 BATTERY SUPPORT FOR GREATER BATTERY
...ter battery
thingiverse
[en] ft009 battery support for greater battery
[fr] support batterie ft009 pour une plus grande batterie
thingiverse
free
Battery pack for 2xAA batteries by hawkan
...attery pack for 2xaa batteries by hawkan
thingiverse
battery pack for two aa batteries., practical for diy electronics projects.
thingiverse
free
Battery Holder
...battery holder
thingiverse
this is a battery holder for multiple types of batteries.
thingiverse
free
Batterie holder / Batterie Magazin by banto
...tterie holder
110 mm x 180 mm
21 x batterie aa 1.5 volt
36 x batterie aaa 1.5 volt
6 x batterie 9.0v block
10 x batterie 3.7 volt
thingiverse
free
Battery organizer
...battery organizer
thingiverse
simplest battery organizer for 10aa and 12 aaa batteries
thingiverse
free
Battery holder for H8 Mini batteries by RobinLin
...ini batteries by robinlin
thingiverse
this is a battery holder for lipo batteries usable for the original 150mah jjrc batteries.
thingiverse
free
For battery by Krabsters
...for battery by krabsters
thingiverse
for battery
thingiverse
free
Battery by leonk
...battery by leonk
thingiverse
battery
thingiverse
free
battery pack for three 18650 batterys by ricardo__xyz
...battery pack for three 18650 batterys by ricardo__xyz
thingiverse
this is a battery pack for three 1865er batterys.
Plate
thingiverse
free
Plate
...plate
thingiverse
this plate connects to my bowl which makes it a lid.
thingiverse
free
stack plate FPV adapter plate
...stack plate fpv adapter plate
thingiverse
stack plate
thingiverse
free
PCR plate holder 96-well plate or 384-well plate
...pcr plate holder 96-well plate or 384-well plate
thingiverse
pcr plate holder for 96-well plate/384-well plate
thingiverse
free
PLATE DRAINER
...plate drainer
thingiverse
a handy plate drainer for deeper plates
thingiverse
free
Plate
...plate
thingiverse
small plate i designed for work to allow us to place number stickers or bar codes to doors
thingiverse
free
plate by Syzguru11
...plate by syzguru11
thingiverse
plate
thingiverse
free
Plate by Yah01
...plate by yah01
thingiverse
plate
thingiverse
free
Plate by nagato
...plate by nagato
thingiverse
plate
thingiverse
free
PLATE DRAINER
...plate drainer
thingiverse
just a handy plate /dish drainer ,handy for deeper plates
thingiverse
free
Tente plates
...tente plates
thingiverse
plates tente
Mounting
thingiverse
free
Pen Mount on BLTouch mount by jetspot
...pen mount on bltouch mount by jetspot
thingiverse
pen mount on bltouch mount
thingiverse
free
RAM Mount, Mount by seanmclean
...ram mount, mount by seanmclean
thingiverse
bridging plate to attach ram mount to yamaha 242, for chartplotter placement.
thingiverse
free
Mount for mount for Garmin GPS by GNOBLIN
...you can use this mount for prevent rotation simple mount around hendelbars.
d handelbar 31.8mm
use m3 screw and din 16903 plug.
thingiverse
free
Permanent mount for Modular Mounting System by WIR14
...permanent mount for modular mounting system by wir14
thingiverse
permanent mount for modular mounting system.
thingiverse
free
Gopro Mount and antenna mount by SuperYoyo
...gopro mount and antenna mount by superyoyo
thingiverse
cut the carbon platform to pass the gopro mount and enjoy !
thingiverse
free
Hexagon Mount for 50mm Mount (Sparkcube) by Draman
...for 50mm mount (sparkcube) by draman
thingiverse
hexagon mount remix from skimmys hotend-mount for sparkcube or other 50mm-mount
thingiverse
free
mount by gixster
...mount by gixster
thingiverse
custom mount
thingiverse
free
Mount by Matrxi999
...mount by matrxi999
thingiverse
shelf mount
thingiverse
free
Motor mount
...motor mount
thingiverse
motor mount
thingiverse
free
GoPro Mount
...gopro mount
thingiverse
gopro mount
No
thingiverse
free
IKEA Vaxer net pot by khrazik
...these are meant to be printed upside down with no ...
thingiverse
free
Quiet control box for SKR 1.4 + cable mgmt layer. by Evilkoal
...if anything is weird, but i haven't noticed anything no ...
thingiverse
free
UVA Mens' Basketball 2018-19 NCAA Trophy by the_qsr
...ncaa trophy) to the remix sources list: https://www.thingiverse.com/thing:757912 in hono of the uva mens' basketball team of 2018-19: https://www.youtube.com/watch?v=hxa3xd4dxcy...
thingiverse
free
Volcano Nozzle Case by garethps
...er nozzles. i could have just stretched it but then the number inserts wouldn't have fit properly, hence my first ever remix!
thingiverse
free
Savage Dragon - Image Comics by ZMilab
...s in my mini style.
if you want more models released weekly and access to exclusives join my patreon!
patreon.com/ziemba3d
enjoy!
thingiverse
free
Concordia and Britannia & Germania expansion boardgame insert by MitutoyoRaytek
...sleeves up to 63x96mm (thin ones, thicker ones might no fit into the card holder). all the containers have...
thingiverse
free
Renna by Legname
...renna by legname
thingiverse
renna in compensato da 3mm
thingiverse
free
Extension Cord Cable Mount Clip by max_davis
...x_davis
thingiverse
cable mount that fits a standard extension cord cable (up to 9mm). just use two screws or nails to mount it.
thingiverse
free
VESA monitor mount French Cleat by Rockster160
...at least one stud with the bracket- as per nomal mounting standards. take caution, have somebody help you and...
thingiverse
free
GBS Zero Rain / Reverse Light IVA Angled Gasket by SeanWally
...pu.
the design includes a small seat adapter make sure that bolts used to secure the light are still mating at the correct angle.