Thingiverse
No drill Hailong Battery Mounting Plate by locnhinho
by Thingiverse
Last crawled date: 3 years, 1 month ago
No drill Hailong Battery Mounting Plate
Hailong battery case mounting plate without drill. Require 2 3/4" hose clamp and M5 screw (length 8 mm).
Instruction:
Get yourself a steel plate, copper bar, or aluminum bar of size 3x15x37mm. Or you can get this - https://www.homedepot.com/p/Simpson-Strong-Tie-HRS-12-in-12-Gauge-Galvanized-Heavy-Strap-Tie-HRS12/100375113 and cut it in width of 15mm.
After you printed the no drill Hailong battery mounting plate, insert the steel bar into the slot.
Now, you need to tap the M5 hole. To do this, use the "Hailong Battery Mounting Plate Drill Guide" printed model as drilling guide. This provides straight guide to drill through the steel plate. Use drill bit 4.2mm and drill through the guide. There are two holes - one smaller and one bigger. Use the smaller hole with the 4.2mm drill bit.
To tap, swap to the larger hole guide and tap over the larger hole. This provides straight 90 degree tap. As for tap, follow tap instruction. (Here is a cheap $10 tap set - https://www.amazon.com/gp/product/B06X9YV16Z/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1)
How to mount on bike:
To mount, use 2 3/4" hose clamp.
To avoid scratch, use heat shrink wrap with the clamp. 5/8" heat shink wrap should work.
Please note that there is also an mount plate for use with the existent bottle hole.
Hailong battery case mounting plate without drill. Require 2 3/4" hose clamp and M5 screw (length 8 mm).
Instruction:
Get yourself a steel plate, copper bar, or aluminum bar of size 3x15x37mm. Or you can get this - https://www.homedepot.com/p/Simpson-Strong-Tie-HRS-12-in-12-Gauge-Galvanized-Heavy-Strap-Tie-HRS12/100375113 and cut it in width of 15mm.
After you printed the no drill Hailong battery mounting plate, insert the steel bar into the slot.
Now, you need to tap the M5 hole. To do this, use the "Hailong Battery Mounting Plate Drill Guide" printed model as drilling guide. This provides straight guide to drill through the steel plate. Use drill bit 4.2mm and drill through the guide. There are two holes - one smaller and one bigger. Use the smaller hole with the 4.2mm drill bit.
To tap, swap to the larger hole guide and tap over the larger hole. This provides straight 90 degree tap. As for tap, follow tap instruction. (Here is a cheap $10 tap set - https://www.amazon.com/gp/product/B06X9YV16Z/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1)
How to mount on bike:
To mount, use 2 3/4" hose clamp.
To avoid scratch, use heat shrink wrap with the clamp. 5/8" heat shink wrap should work.
Please note that there is also an mount plate for use with the existent bottle hole.
Similar models
thingiverse
free
Hailong Battery Mounting Plate by locnhinho
... repeat for the other two holes if required.
please note that there are two versions - one for 50mm frame and one for 40mm frame.
thingiverse
free
XT60 Hailong Battery Case Mount by locnhinho
...g 3mm or 1/8" drill bit, drill a second time.
insert the xt60 housing
using two m3 8mm length screw, screw in the two screws
thingiverse
free
2040 Aluminum Extrusion DRILL Helpers by XRT9
... you will need a m5x45mm.
only left sides were uploaded. to use on right side use your "mirror" function in your slicer
thingiverse
free
Bafang Hailong battery holder by illbe
... hose clamps + m5 nuts + m5x16 or 20 screws.
designed for bike frame of diam 50mm but can be modified to fit your frame.
thanks !
thingiverse
free
Bafang Hailong battery support by illbe
... hose clamps + m5 nuts + m5x16 or 20 screws.
designed for bike frame of diam 50mm but can be modified to fit your frame.
thanks !
grabcad
free
MB390 Pole Mount adapter
...t; pole.
it requires 3 m3 screws and nuts to fasten base plate to adapter. then mount using tie wraps or 1/2" hose clamp.
thingiverse
free
Gopro bicycle seat mount by Ktronik
... drilled the larger base.....and with a m5 bolt, i tapped the smaller top plate....you could also drill it thru and use a nut....
thingiverse
free
Bike chain guard Shimano 44T 104mm by Jimbob
...and mount with 4 20mm x m5 screws.
(i used a 4.2mm drill to open out the existing holes on the sprocket nuts then used a m5 tap)
thingiverse
free
Floating nutplate drill guide
...floating nut plates. drill the center hole to locate the position then insert the guide, index it, and drill the mounting holes.
thingiverse
free
Elektra Beckum BAS315/4 Dust Collection Shroud by leonardlowe
...e opening and screw the shroud in place.
https://www.thingiverse.com/thing:3283749 is a great addition to hold the hose in place.
Hailong
thingiverse
free
Hailong Battery Bike Mount
...s made for the main battery or for a second one you want to swap.
.... this is made by william woodner aka all about woodner ....
thingiverse
free
Hailong eBike Battery Wall mount
...sh e-bike cargobike delight. it should also work with other manufacturers that use the hailong battery, like seaside for example.
thingiverse
free
Schwinn Shuffle Hailong Battery Mount by rsoko
...ilong battery pack mount.
i used these ziptie mounts and made my own battery case mount:https://www.thingiverse.com/thing:4698614
thingiverse
free
Bracket for Hailong Battery case by Xerg
...s limited to apprx 20cm. glued with epoxy resin and reinforced with several strands of carbon roving on the inner- and underside.
thingiverse
free
XT60 Replacement for DC2.1mm Hailong Case by locnhinho
...ject some hot glue into the two small holes
for the xt60 cover, get it from this one - https://www.thingiverse.com/thing:4793612.
thingiverse
free
Hailong battery bracket - fitting and strain relief by fluffgummi
...ic hole where the cables come out.
to remedy this i printed a fitting for the hole/cable exit and a strain relief for the cables.
thingiverse
free
Hailong Battery Mount for Schwinn Shuffle by rsoko
... make fit my dimensions: https://www.thingiverse.com/thing:4698614 (sorry wouldn't let me say it was a remix for some reason)
thingiverse
free
XT60 Hailong Battery Case Mount by locnhinho
...g 3mm or 1/8" drill bit, drill a second time.
insert the xt60 housing
using two m3 8mm length screw, screw in the two screws
thingiverse
free
Hailong Battery Mounting Plate by locnhinho
... repeat for the other two holes if required.
please note that there are two versions - one for 50mm frame and one for 40mm frame.
Locnhinho
thingiverse
free
Monticello by locnhinho
...the hall
increase the wall to 1.2mm
shift the dome to not touch the wall due to wall increase to 1.2mm
pull out the windows a bit
thingiverse
free
Castle by locnhinho
... top surface, extrude down to base
fix and enlarge the flag
inscribe "castle by alyssa ho 4th grade 2021" at the bottom
thingiverse
free
Protector for Polaris D30 UWF Quick Disconnect by locnhinho
...designed this to protect it from getting broken. if you want to buy one, look at this link https://www.ebay.com/itm/193622399518.
thingiverse
free
XT60 Replacement for DC2.1mm Hailong Case by locnhinho
...ject some hot glue into the two small holes
for the xt60 cover, get it from this one - https://www.thingiverse.com/thing:4793612.
thingiverse
free
Bafang Wire Housing for Bike Hand Bar by locnhinho
... look nice:
sand it with 240, 120, and 400
spray paint
included the fusion 360 file so that you can modify it for your fork size.
thingiverse
free
Polaris Wheel Nut by locnhinho
...replacement. see polaris 280 small wheel holder.stl and image attached. you will need an m5 hex nut as well as a longer m5 screw.
thingiverse
free
Ego Battery Adapter to XT60 by locnhinho
...solder. heat up the plate first add a blob of solder. then joint with the wire.
on the other end, solder to xt60 female connector
thingiverse
free
Raspberry PI Zero Camera Mount for Flying Bear P905 by locnhinho
... 50mm fan blower, it now touched the 50mm fan blower. as such, added second version to move the camera out by 0.5" or 13 mm.
thingiverse
free
Hailong Battery Mounting Plate by locnhinho
... repeat for the other two holes if required.
please note that there are two versions - one for 50mm frame and one for 40mm frame.
thingiverse
free
Dual mosfet for Flying Bear P905 by locnhinho
...rilla mosfet
you can use 3mm screw with nut to mount the bracket to the mosfet mounting plate. or use those computer disk screw.
Drill
archibase_planet
free
Drill
...drill
archibase planet
drill electric drill power drill
drill n091107 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drill
...drill
archibase planet
drill hand drill
drill 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drill
...drill
archibase planet
drill hand drill
drill 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drill
...drill
archibase planet
drill hand drill
drill 3- 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drill
...drill
archibase planet
boring rig rig drill
drill n070807 - 3d model for interior 3d visualization.
archibase_planet
free
Drill
...drill
archibase planet
hand drill toolware
drill 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drill
...drill
archibase planet
perforator drill auger
drill 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$25
Drill
...ll
turbosquid
royalty free 3d model drill for download as ma on turbosquid: 3d models for games, architecture, videos. (1203923)
turbosquid
free
Drill
...l
turbosquid
free 3d model drill for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1628646)
archibase_planet
free
Drill
...drill
archibase planet
boring mill perforator driller
drill pro 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Battery
3d_ocean
$2
Battery
...battery
3docean
battery electronic
a high quality battery .
3d_export
free
battery
...battery
3dexport
battery
3d_ocean
$5
Battery
...battery
3docean
battery electronics
a classic 6 v battery, high poly with materials
3d_ocean
$3
Batteries
...batteries 3docean aa aaa batteries battery d electronics energy materials power subdivision uv unwrapped aa,...
3d_export
$19
Lead-acid battery storage battery lithium battery
...ttery storage battery lithium battery
3dexport
1.lead-acid battery storage battery lithium battery 2.files include 3dmax obj fbx
3d_ocean
$7
Battery Model
...battery model
3docean
big battery car battery vehicle battery
car battery, big battery, vehicle battery.
3ddd
free
battery energier
...battery energier
3ddd
battery energier , батарейка
battery energier
turbosquid
free
battery
...battery
turbosquid
free 3d model battery for download as obj on turbosquid: 3d models for games, architecture, videos. (1151676)
3d_ocean
$1
Battery Model
...lack minus plus white yellow
this is battery model is about 1000 triangles. turntable preview is smoothed version of the battery.
3d_export
$10
battery 18650
...battery 18650
3dexport
battery 18650
Plate
archibase_planet
free
Plates
...plates
archibase planet
plates and dishes plate
plates - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
plate
...plate
3dexport
plate
archibase_planet
free
Plates
...plates
archibase planet
plates and dishes plate kitchen ware
plates - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Plates
...plates
archibase planet
plate plates and dishes crockery
plates 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Plate
...plate
archibase planet
dinner-plate plate kitchen ware
plate n070808 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$6
plate
...plate
3dexport
design of plate
3d_export
$5
plate
...plate
3dexport
plate lowpoly
archibase_planet
free
Plates
...plates
archibase planet
plate dish kitchen-ware
plate - 3d model for interior 3d visualization.
3ddd
$1
Plates
...plates
3ddd
полка , тарелка
african plates
archibase_planet
free
Plate
...plate
archibase planet
plate kitchen ware
plate - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Mounting
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)