Thingiverse
NIRODHA's HPA Bullpup Nerf Blaster
by Thingiverse
Last crawled date: 4 years, 3 months ago
Hello Nerf fans! If you like Nerf, HPA, bullpups and making your own blasters... this might be for you!
To Those who have been following me on insta, reddit or YouTube and have been patiently waiting for these files to be shared: Thank you once more for your patience!
You are looking at a fully self contained semi automatic HPA 'bottle on board' nerf blaster capable of firing half length darts as fast as you can pull the trigger with a range of velocities from 130 FPS (with a ported barrel at around 40 psi) to all the way to well above 250 FPS (with a brass lined solid barrel and around 50 psi). At 40 psi set pressure the 13ci on board tank filled to 3000 PSI will give you north of 200 shots from the blaster.
Mind you: this is an HPA powered blaster meant for competitive nerf events where people play nerf as a sport. Not a regular toy! Only build one of these under strict supervision of or as an adult. Also make sure you abide by all your local laws and regulations and never ever bring one of these out in public. If (and only if) legal in your country take these from and to the games you attend (on private propperty only!) in a bag with the HPA tank not connected to the blaster. Do not use this blaster to harm or threaten other people and/or hurt animals. When in doubt... ask your local law enforcement.
Now... when you still want to build one of these. The following will help:
Besides the printed components you'll need:
A super core (built and sold by Liam Davis a.k.a Bang Spectre Armaments)
Alternatively in the near future a SNIPER core which will be interchangeable (and will feature a normally open breech)
One of Liam's brass lined custom barrels. He can make it the perfect length for this blaster.
A receiver (also by Liam) for the SUPER or SNIPER core's bolt. Normally your core comes with one as far as I am aware.
If your receiver is a V3 you will need a 3D printed funnel piece inserted inside to help feed Worker G3 darts (Dean from Blastertech made and shared one on thingiverse)
Atleast 1 First Strike 13ci HPA tank with a HERO reg
As the second stage regulator you will need a 'Empire Relay On/Off ASA regulator'
A custom coupler to go from the second stage reg to a 1/8" push in connector
Mindmann MVHF-3P-NO-G (European Clippard MJVO-3 NO analog)
Less than a meter of 6mm OD pneumatic hose
3x FESTO Push in fitting Male G1-8 6mm (in grip)
1x Legris push to connect threaded elbow 1/8'' BSPP to 6 mm 3199-06-10 (for core)
1x Legris push-to-connect stem elbow 6mm hose to 6 mm stem 3184-06-00 (need to cut down the stem to make the return as tight as possible to the core. Plug it in without cutting down first.. measure the distance... cut off the distance from the stem... sorted!)
a longshot catch spring (trigger return)
a longshot standard stock lock mechanism return spring (mag release return)
atleast 25 or so Jeveka SP1500M00030000 brass M3 inserts (which ought to be pressed into the 3D printed parts with a soldering iron (heat them up intill they go in smoothly). Check the STEP file of the entire assmebly for the exact number and location. Also alternative inserts can be used... you might have to change the holes to accomodate them)
2x Socket Countersunk head Screw M3x16 DIN 7991 (bridge between magwell and grip)
3x Socket Countersunk head Screw M3x12 DIN 7991 (mag stop & grip)
11x Socket Head Thin Cap Screw M3x12 DIN7984
4x Socket Set Screw Cup Point DIN 916 M3x5 (barrel spacers/holders))
4x Socket Countersunk Head Screw DIN7991 M3x8 (grip)
2x Socket Button Head Screw ISO 7380 M5x30 (mount second stage reg)
2x washer small M5 (mount second stage reg)
2x Domed Cap Nut DIN1587 M5 (mount second stasge reg)
a 2mm metal pin or nail cut down to size (mag release axis)
sandpaper (make things fit)
epoxy or 3D printed parts glue (to glue the monocoqye together)
patience! Many things downt fit straight away... take your time to look at why and sand down parts as you need to)
A bunch of worker Talon mags... this blaster does not take any other mags!
A bunch of darts
A means of pressurizing your hpa tank
Tools (mainly screwdrivers, allen keys and wrenches)
optionally:
a Worker Vertical Foregrip
a Vector Optics Mustang 1.5-4x30 scope
alternatively (and I prefer this option) a holosight
Tactical flip-up sights (Magpull style)
Magpul style slingmount(s) that attach to the picatinny
A Magpull style single to two point sling(hybrid)
A scar (I have a 6 string orange Delrin scar made by Spectre to fit my custom (non ported) barrel)
Thanks again for your interest in this blaster! I truly hope some of you will attempt to build one. And ofcourse I hope you will enjoy the blaster.
If you have constructive feedback, questions or remarks.. you can always contact me and I will do my best to answer as soon as I can.
I might do some upgrades on the design in the future. I am still testing it myself.
Lastly I would once again like to thank Dennis, Liam, the DNC, my followers on Reddit, Insta and Youtube and anyone else who has supported me throughout this process. You guys are awsome!
To Those who have been following me on insta, reddit or YouTube and have been patiently waiting for these files to be shared: Thank you once more for your patience!
You are looking at a fully self contained semi automatic HPA 'bottle on board' nerf blaster capable of firing half length darts as fast as you can pull the trigger with a range of velocities from 130 FPS (with a ported barrel at around 40 psi) to all the way to well above 250 FPS (with a brass lined solid barrel and around 50 psi). At 40 psi set pressure the 13ci on board tank filled to 3000 PSI will give you north of 200 shots from the blaster.
Mind you: this is an HPA powered blaster meant for competitive nerf events where people play nerf as a sport. Not a regular toy! Only build one of these under strict supervision of or as an adult. Also make sure you abide by all your local laws and regulations and never ever bring one of these out in public. If (and only if) legal in your country take these from and to the games you attend (on private propperty only!) in a bag with the HPA tank not connected to the blaster. Do not use this blaster to harm or threaten other people and/or hurt animals. When in doubt... ask your local law enforcement.
Now... when you still want to build one of these. The following will help:
Besides the printed components you'll need:
A super core (built and sold by Liam Davis a.k.a Bang Spectre Armaments)
Alternatively in the near future a SNIPER core which will be interchangeable (and will feature a normally open breech)
One of Liam's brass lined custom barrels. He can make it the perfect length for this blaster.
A receiver (also by Liam) for the SUPER or SNIPER core's bolt. Normally your core comes with one as far as I am aware.
If your receiver is a V3 you will need a 3D printed funnel piece inserted inside to help feed Worker G3 darts (Dean from Blastertech made and shared one on thingiverse)
Atleast 1 First Strike 13ci HPA tank with a HERO reg
As the second stage regulator you will need a 'Empire Relay On/Off ASA regulator'
A custom coupler to go from the second stage reg to a 1/8" push in connector
Mindmann MVHF-3P-NO-G (European Clippard MJVO-3 NO analog)
Less than a meter of 6mm OD pneumatic hose
3x FESTO Push in fitting Male G1-8 6mm (in grip)
1x Legris push to connect threaded elbow 1/8'' BSPP to 6 mm 3199-06-10 (for core)
1x Legris push-to-connect stem elbow 6mm hose to 6 mm stem 3184-06-00 (need to cut down the stem to make the return as tight as possible to the core. Plug it in without cutting down first.. measure the distance... cut off the distance from the stem... sorted!)
a longshot catch spring (trigger return)
a longshot standard stock lock mechanism return spring (mag release return)
atleast 25 or so Jeveka SP1500M00030000 brass M3 inserts (which ought to be pressed into the 3D printed parts with a soldering iron (heat them up intill they go in smoothly). Check the STEP file of the entire assmebly for the exact number and location. Also alternative inserts can be used... you might have to change the holes to accomodate them)
2x Socket Countersunk head Screw M3x16 DIN 7991 (bridge between magwell and grip)
3x Socket Countersunk head Screw M3x12 DIN 7991 (mag stop & grip)
11x Socket Head Thin Cap Screw M3x12 DIN7984
4x Socket Set Screw Cup Point DIN 916 M3x5 (barrel spacers/holders))
4x Socket Countersunk Head Screw DIN7991 M3x8 (grip)
2x Socket Button Head Screw ISO 7380 M5x30 (mount second stage reg)
2x washer small M5 (mount second stage reg)
2x Domed Cap Nut DIN1587 M5 (mount second stasge reg)
a 2mm metal pin or nail cut down to size (mag release axis)
sandpaper (make things fit)
epoxy or 3D printed parts glue (to glue the monocoqye together)
patience! Many things downt fit straight away... take your time to look at why and sand down parts as you need to)
A bunch of worker Talon mags... this blaster does not take any other mags!
A bunch of darts
A means of pressurizing your hpa tank
Tools (mainly screwdrivers, allen keys and wrenches)
optionally:
a Worker Vertical Foregrip
a Vector Optics Mustang 1.5-4x30 scope
alternatively (and I prefer this option) a holosight
Tactical flip-up sights (Magpull style)
Magpul style slingmount(s) that attach to the picatinny
A Magpull style single to two point sling(hybrid)
A scar (I have a 6 string orange Delrin scar made by Spectre to fit my custom (non ported) barrel)
Thanks again for your interest in this blaster! I truly hope some of you will attempt to build one. And ofcourse I hope you will enjoy the blaster.
If you have constructive feedback, questions or remarks.. you can always contact me and I will do my best to answer as soon as I can.
I might do some upgrades on the design in the future. I am still testing it myself.
Lastly I would once again like to thank Dennis, Liam, the DNC, my followers on Reddit, Insta and Youtube and anyone else who has supported me throughout this process. You guys are awsome!
Similar models
thingiverse
free
Nerf - One-Dart Mag by Yoji00
...ire mag-fed blasters one dart at a time? but those stinkin' mag lips kept getting in the way?
well have i got a print for you
thingiverse
free
Nerf Barrel to Stock Coupler by Technobly
...s from the nerf retaliator.
i have included the original sketchup files to make it easier for someone to remix my work. enjoy!
thingiverse
free
Axiom: Long Barrel Shroud by Aitchison
...gns, they must also be made open source.
you can get the whole blaster at either:
www.atchattachments.co.uk
www.frontlinefoam.com
thingiverse
free
Nerf Fore Grip by Talon2535
...nerf fore grip by talon2535
thingiverse
custom fore grip for your nerf blasters
thingiverse
free
Tempest - HPA foam dart blaster
...ompression spring (mcmaster 9657k266)
1x 3mm threaded insert (mcmaster 94180a333)
1x m3x10 socket head screw (mcmaster 91290a115)
thingiverse
free
Nerf shell 9/16ths brass
...this is going to be an hpa/lpa blaster, i need a good seal against the tank. thanks for reading, please let me know your thoughts
thingiverse
free
Front Grip resized for Caliburn by Revenantautumn
...with around an m4 screw. pictured is the shorter grip version with an m5 screw because that was the only one i had laying around.
thingiverse
free
HPA buttstock 13CI by Halsahaf
...ttom part of the stock.
pad will be fixed with pressure, for extra security use a bit of glue.
editable files will be added soon.
thingiverse
free
Tornado mags for Rivals rounds
...asters for the standard i've included .step files so you can tweak it to your liking. the one included can store 9-10 rounds.
thingiverse
free
(Version 0.1) Drop in Kit for Nerf Projects by ExoticVoid
...s dual stage.
assemble it and glue it into whereever you like it to go.
i haven't tested that new version but it should work.
Nirodha
thingiverse
free
Nerf Longshot stock, fully 3D printed
...3d printed thingiverse (remixed from"nerf longshot adjustable stock by nirodhaquot; https://www.thingiverse.com/thing:3579530) a remix of a longshot stock that is...
thingiverse
free
Hpa Talon Claw by Ninjamoe27
...files used for this project. talon claw smg ar15https://www.thingiverse.com/thing:3688181 nirodha#39;s hpa bullpup nerf blasterhttps://www.thingiverse.com/thing:3964119 just wanted to preface this...
thingiverse
free
Nerf Longshot cosmetic remix kit by my86outback
...last thing i added was a remix of the nirodha stock (thing:3579530). i made it a fixed stock. if...
thingiverse
free
Warburn Remix a la hoellenhamster by hoellenhamster123
...10mm od aluminium pipe (or similar). the original used nirodha#39;s extendable longshot design but the metal braces for that...
Bullpup
thingiverse
free
AK Bullpup Concept for 28mm
...ak bullpup concept for 28mm
thingiverse
ak bullpup concept for 28mm miniatures.
thingiverse
free
Talon Claw Bullpup Shroud
...talon claw bullpup shroud
thingiverse
pab shroud edited for use on the talon claw bullpup
thingiverse
free
Bullpup Nerf Jolt
...of the tolerances are tight, especially the nut, and may need to be scaled for your machine. everything is better as a bullpup ;)
thingiverse
free
Bullpup Rifle by Tmanzz122
...bullpup rifle by tmanzz122
thingiverse
rifle with stand
thingiverse
free
Bullpup pieces by Lucifer_lynch
...bullpup pieces by lucifer_lynch
thingiverse
pieces 1-5 plus dmag
thingiverse
free
Assault Bullpup (F.A.M.A.S) by Wayroxx
...assault bullpup (f.a.m.a.s) by wayroxx
thingiverse
subscribe!!
thingiverse
free
Bullpup design
...ign for now but if i get good feedback i will add more.
please comment on anything needed for it or design concepts to add to it.
thingiverse
free
Nerf Bullpup Barrel Holder by Drev453
...is a barrel holder that i made for my homemade bullpup design on nerfhaven. http://nerfhaven.com/forums/index.php?showtopic=25046
thingiverse
free
Nerf Bullpup Barrel Holder by Drev453
...se
a barrel holder for my homemade bullpup. the writeup can be found here: http://nerfhaven.com/forums/index.php?showtopic=25046
thingiverse
free
Talon Claw Bullpup side mag release by c5k0
...n claw bullpup side mag release by c5k0
thingiverse
mag release for the talon claw bullpup.
installation instructions to follow.
Hpa
thingiverse
free
Hpa regulator shim by dipdro
...hpa regulator shim by dipdro
thingiverse
this is a shim that fit perfectly on the hpa regulator pin.
thingiverse
free
HPA Tournament LockCap BalystiK by Sidenius
...hpa tournament lockcap balystik by sidenius
thingiverse
a hpa turnament lock cap for balystik regulator
thingiverse
free
HPA SLP Tournament Lock by Mike0253
...lock used with a zip-tie used to lock in a psi selection on an slp hpa regulator. works with the amped airsoft slp hpa regulator.
thingiverse
free
HPA Tournament LockCap SMC by Sidenius
...hpa tournament lockcap smc by sidenius
thingiverse
a airsoft hpa tournament lock cap for smc arx20
thingiverse
free
HPA Tournament LockCap by Sidenius
...cap by sidenius
thingiverse
i made this cap for my hpa ninja rig when i was attending to a game that required a lockcap
enjoy :d
thingiverse
free
Parts Of Daytona Gun Hpa Lct Ak
...parts of daytona gun hpa lct ak
thingiverse
daytona gun hpa lct ak kit
thingiverse
free
HPA Longshot Breech Pusher by CodyECSL
...remix of the caliburn pusher mech to be used for an hpa build as shown in this build: https://photos.app.goo.gl/uzndghzo20yqro3f2
thingiverse
free
Riffled pad for HPA buttstock
...0.5 mm) by wald0.
intended to print in tpu and glued to the back of the buttstock after bending it over the angled lower section.
thingiverse
free
HPA Glock to M4 by Mega_blob
...hpa pour chargeur glock.
ce glisse à la place de la plaque du fond de chargeur et est bloquer par la valve hpa (photo, valve eu)
thingiverse
free
HPA CASE HeadPhone Amplifier Portable Case by mr175185
...e-kit45-hpa (akiduki-denshi hpa kit)
if you make it need adjustment some gaps, this .stl data haven't margin.
(...now adding)
Blaster
thingiverse
free
The Mandalorian Blaster cookiecutter
...the mandalorian blaster cookiecutter
thingiverse
the mandalorian blaster
thingiverse
free
Blaster of an Transformer by Edenoi
...blaster of an transformer by edenoi
thingiverse
a blaster fits for transformers
thingiverse
free
Mandalorian Blaster by Technivorous
...take on the blaster from the mandalorian. this mandalorian blaster is the tk-nvrs 923, for my personal mandalorian outfit. enjoy!
thingiverse
free
Lego Compatible Blasters by cooperg2001
...tible blasters by cooperg2001
thingiverse
just some blasters i made. heavily based on the actual lego blaster and blaster rifle.
thingiverse
free
m1911 blaster
...m1911 blaster
thingiverse
custom prop
thingiverse
free
Slugterra Blaster MK_II (Double Barrel Blaster Mod) by Gadget__
...ingiverse.com/thing:3089203
old design: https://www.thingiverse.com/thing:3032316
sludge blaster from slugterra
made on tinkercad
thingiverse
free
Mandalorian Blaster
...wars tv show. i pulled as much information on this as possible but there are probably some minor things that need to be adjusted.
thingiverse
free
E-5 Blaster by Widows
...e-5 blaster by widows
thingiverse
the gamer blaster
thingiverse
free
E-11 Blaster by Rufian
...e-11 blaster by rufian
thingiverse
e-11 blaster
thingiverse
free
E-11 Blaster by SPILLER_PAULO
...e-11 blaster by spiller_paulo
thingiverse
e-11 blaster
Nerf
thingiverse
free
Pistola a dardi NERF (Nerf Gun) by ruggeromarzocca
...pistola a dardi nerf (nerf gun) by ruggeromarzocca
thingiverse
nerf gun, pistola nerf...
thingiverse
free
NERF Wallmount
...nerf wallmount
thingiverse
this is our custom designed nerf gun wallmount.
thingiverse
free
Nerf darts holder for Nerf Jolt by mcbress
...nerf darts holder for nerf jolt by mcbress
thingiverse
this is a two darts holder designed for nerf jolt gun
thingiverse
free
nerf ammo by selimaydin61
...nerf ammo by selimaydin61
thingiverse
nerf ammo
nerf mermi haznesi
thingiverse
free
Nerf silencer
...nerf silencer
thingiverse
nerf silincer for worker 19mm barrel ,friction fit
thingiverse
free
nerf to nerf rail long and thin by carnageg
... version of the nerf to nerf rail that i used to create a magnus masterkey, just wanted everything as tight and neat as possible.
thingiverse
free
Nerf Sharpfire Barrel Mod With Nerf Jolt Clip
...th nerf jolt clip
thingiverse
this is a barrel for the nerf sharpfire. it can have a nerf jolt attached to it, under the barrel.
thingiverse
free
Nerf Shield
...nerf shield
thingiverse
nerf shield mount. use a trasparent ferrero rocher packaging as a shield.
thingiverse
free
nerf thing by supergamer52
...nerf thing by supergamer52
thingiverse
nerf this
thingiverse
free
Nerf stock by elre1107
...nerf stock by elre1107
thingiverse
nerf stock