Nintendo Switch Modular Dock by jousis

Last crawled date: 3 years ago

update 12-Jul: All modules tested. Uploaded the full fusion 360 file with all the components plus some "beta".update 1-Jul: I retested everything, found no issues. BETA warning removed :). Also added a spitted version for smaller printers.
I wanted to make a dock but I couldn't decide if I wanted the USB on the front, or in the back.
So , I did both.
Everything is designed in fusion 360 and when I am done with it I will probably also upload the original files for anyone who want to make a better version of it (I left 3d modelling hobby 15 years ago, so the design can be improved a lot).
Using the original electronics and the original screws (and some snap fits) you can assemble this dock in 2 ways. Motherboard below the switch and behind.
When motherboard is below, the USB ports will be on the front side and the HDMI ports at the back.
When motherboard is behind, USB and HDMI are on the same side as the original dock.
In both cases, the ribbon cable -although will be bend a little- is not stressed in abnormal ways.
Feel free to comment on the design and tell me what modules you want apart from those already built (cartridge/SD and logos).
Finally, I will upload the joint(s) specification so you can make a compatible module on your own.