Thingiverse
Nintendo Switch Gaming Stand by fluffygryphon
by Thingiverse
Last crawled date: 4 years ago
UPDATE: I have created a revised design called SwitchStandmk2 that addresses a couple shortcomings in the stand's geometry. The stand legs are now a little more robust and the Switch will sit a couple millimeters higher, allowing for additional cable clearance.
The Nintendo Switch currently has no stands that allow gaming while plugged in. I've decided to remedy this situation. The stand that I have designed allows for a snug fit and should not rub on the screen. Breathing ports in the back provide adequate air flow for cooling purposes.
Note: Print the stand upright with a brim. This should provide plenty of adhesion. Supports are required.
Tinker Gryphon Designs
The Nintendo Switch currently has no stands that allow gaming while plugged in. I've decided to remedy this situation. The stand that I have designed allows for a snug fit and should not rub on the screen. Breathing ports in the back provide adequate air flow for cooling purposes.
Note: Print the stand upright with a brim. This should provide plenty of adhesion. Supports are required.
Tinker Gryphon Designs