Thingiverse
Nintendo Labo Piano Sound Cards by B0undarybreaker
by Thingiverse
Last crawled date: 4 years, 7 months ago
Sound cards for the Nintendo Labo Piano! To play, insert into the top slot of your toy-con piano in studio mode and hit the scan button. Currently available, included both as an STL for 3D printing and as an SVG for laser-cutting:
NES Triangle, a triangle wave in the same shape of the one made by the NES' synthesizer.
Square, a simple square wave.
True Triangle, a simple triangle wave.
Half Saw, a sawtooth wave half the frequency of the Labo default sawtooth wave.
Half Sine, a sine wave half the frequency of the Labo default sine wave.
Blank Sound C6ard is what it implies, a blank SVG for designing your own sound cards.
NOTE: Make sure each card is proportionally scaled to 4.5" or 114.3mm wide if you're using a laser cutter. Otherwise they may not fit inside the toy-con piano. Make sure you use cardboard thinner than 1/8" or 3mm, or it might not fit in the guides on the piano.
NES Triangle, a triangle wave in the same shape of the one made by the NES' synthesizer.
Square, a simple square wave.
True Triangle, a simple triangle wave.
Half Saw, a sawtooth wave half the frequency of the Labo default sawtooth wave.
Half Sine, a sine wave half the frequency of the Labo default sine wave.
Blank Sound C6ard is what it implies, a blank SVG for designing your own sound cards.
NOTE: Make sure each card is proportionally scaled to 4.5" or 114.3mm wide if you're using a laser cutter. Otherwise they may not fit inside the toy-con piano. Make sure you use cardboard thinner than 1/8" or 3mm, or it might not fit in the guides on the piano.