Thingiverse
NinjaFlex QAV250 Landing Gear by rsoko
by Thingiverse
Last crawled date: 4 years, 7 months ago
For QAV250 cf or G10 versions (Probably could work with other 250 sized mini quads).
Printed with NinjaFlex.
0.4 shell thickness
5%-30% infill. (depending on the flexibility you need)
Attach with zipties to legs.
Have good clearance with minimal wind resistance.
Inspiration from:http://www.thingiverse.com/thing:653222
*Taller landing gear for taller standoffs (Extra 15mm) or for harder landings.
Printed with NinjaFlex.
0.4 shell thickness
5%-30% infill. (depending on the flexibility you need)
Attach with zipties to legs.
Have good clearance with minimal wind resistance.
Inspiration from:http://www.thingiverse.com/thing:653222
*Taller landing gear for taller standoffs (Extra 15mm) or for harder landings.