Thingiverse
Nexus 7 Stand with Android by bobamason
by Thingiverse
Last crawled date: 4 years, 8 months ago
The stand holds the 1st generation Nexus 7 at a 75deg. angle and has a Android character that is a separate piece so that it can be printed in a different color.
I am still working on more designs to be interchangeable with the Android
Parts Needed:
One 4x1/2 Philips Screw
(optional) Two 1" Adhesive Grip Pads
Printing:
mininum bed width is 140mm
print both pieces
use a screw to attach the Android to the base as shown in the image
(optiional) apply grip pads to the bottom of the base in the circular recesses
no support material is required and infill of 15-20% works for the base and the Android can have less infill
on a Solidoolde at 15% infill, the base took about 2hrs and the Android took about 40min to print
I am still working on more designs to be interchangeable with the Android
Parts Needed:
One 4x1/2 Philips Screw
(optional) Two 1" Adhesive Grip Pads
Printing:
mininum bed width is 140mm
print both pieces
use a screw to attach the Android to the base as shown in the image
(optiional) apply grip pads to the bottom of the base in the circular recesses
no support material is required and infill of 15-20% works for the base and the Android can have less infill
on a Solidoolde at 15% infill, the base took about 2hrs and the Android took about 40min to print