Thingiverse
![Nextion 5" HMI enclosure with buttons by Nummer987](/previews/8144425.jpg)
Nextion 5" HMI enclosure with buttons by Nummer987
by Thingiverse
Last crawled date: 3 years, 5 months ago
A professional industrial enclosure (HMI) for a Nextion 5" enhanced serie.
The 5 buttons and 2 LEDs are connected to the GPIO pins of the Nextion display. On the side theres a micro SD Slot which is also directly connected to the display for uploading new data to the display. If you want you can install a small Emergency-Stop-Button to the top right (or just close the hole with a disc like on the photos).
This HMI can be connected with a 5 pin connector to a controller (Arduino for example). This pins could be (5V, GND, Tx, Rx, Signal for EMG).
If wanted you can add two o rings, one for the display, one for the backplate, to keep it more water and dust proof.
Parts list:
1x Nextion 5" Enhanced Serie
5x ITW 59-111 Switch
1x Ribu Micro SD-Einbaubuchse
2x LED 103 A 3mm (Reichelt)
Optional:
1x o ring 112x2mm
1x o ring 173x2mm
1x Emergency Button X6 Serie 30mm
I also secured the display and the backplate with threaded insert nuts (M3) and M3 screws.
The 5 buttons and 2 LEDs are connected to the GPIO pins of the Nextion display. On the side theres a micro SD Slot which is also directly connected to the display for uploading new data to the display. If you want you can install a small Emergency-Stop-Button to the top right (or just close the hole with a disc like on the photos).
This HMI can be connected with a 5 pin connector to a controller (Arduino for example). This pins could be (5V, GND, Tx, Rx, Signal for EMG).
If wanted you can add two o rings, one for the display, one for the backplate, to keep it more water and dust proof.
Parts list:
1x Nextion 5" Enhanced Serie
5x ITW 59-111 Switch
1x Ribu Micro SD-Einbaubuchse
2x LED 103 A 3mm (Reichelt)
Optional:
1x o ring 112x2mm
1x o ring 173x2mm
1x Emergency Button X6 Serie 30mm
I also secured the display and the backplate with threaded insert nuts (M3) and M3 screws.
Similar models
grabcad
free
![Nextion HMI 4.3"](/t/5180483.jpg)
Nextion HMI 4.3"
...nextion hmi 4.3"
grabcad
4.3" nextion enhanced hmi intelligent smart usart serial lcd module display
grabcad
free
![Nextion NX8048K070 HMI Display](/t/7680754.jpg)
Nextion NX8048K070 HMI Display
...nextion nx8048k070 hmi display
grabcad
7.0" nextion hmi display
grabcad
free
![Nextion Intelligent 7" Enclosure & GPIO Board](/t/7803584.jpg)
Nextion Intelligent 7" Enclosure & GPIO Board
...corporate the enclosure into their own machine chassis designs for perfect fitment, not for manufacturing knock-off enclosures.**
grabcad
free
![HMI Nextion 5" Intelligent](/t/12764038.jpg)
HMI Nextion 5" Intelligent
...hmi nextion 5" intelligent
grabcad
pantalla nextion 5" intelligent.
grabcad
free
![DISPLAY NEXTION NX8048T050 5.0"](/t/5796024.jpg)
DISPLAY NEXTION NX8048T050 5.0"
...display nextion nx8048t050 5.0"
grabcad
nextion nx8048t050 - 5.0" lcd tft hmi intelligent touch display
grabcad
free
![Nextion Enhanced 4.3 HMI](/t/1769739.jpg)
Nextion Enhanced 4.3 HMI
...nextion enhanced 4.3 hmi
grabcad
nextion enhanced 4.3 hmi
this unit has the gpio port and rtc battery
grabcad
free
![3D print case cabinet nextion 5"](/t/5594556.jpg)
3D print case cabinet nextion 5"
...3d print case cabinet nextion 5"
grabcad
3d print case cabinet nextion 5" hmi tft lcd usart
thingiverse
free
![Nextion Display Prototyping Jig by heinandre](/t/8277821.jpg)
Nextion Display Prototyping Jig by heinandre
...hingiverse
this is a simple, easy and fast to print jig for the nextion nx4832t035 - 3.5" hmi tft lcd touch display module.
3d_export
$9
![Nextion NX4832T035 35 Inch 480x320 HMI TFT LCD Touch Display Module](/t/11369950.jpg)
Nextion NX4832T035 35 Inch 480x320 HMI TFT LCD Touch Display Module
...cd touch display module
3dexport
nextion basic serie display nx4832t035 3d model, file formats step and iges. ------------------
grabcad
free
![Nextion 4.3 Bezel](/t/1859644.jpg)
Nextion 4.3 Bezel
...nextion 4.3 bezel
grabcad
bezel for the 4.3" nextion displays.
one model with external slot for sd card, the other without
Nextion
3d_export
$9
![Nextion NX4832T035 35 Inch 480x320 HMI TFT LCD Touch Display Module](/t/11369950.jpg)
Nextion NX4832T035 35 Inch 480x320 HMI TFT LCD Touch Display Module
...cd touch display module
3dexport
nextion basic serie display nx4832t035 3d model, file formats step and iges. ------------------
thingiverse
free
![Nextion nx4832T035_011](/t/4911516.jpg)
Nextion nx4832T035_011
...nextion nx4832t035_011
thingiverse
dummy for nextion nx4832t035_011 display.
thingiverse
free
![Nextion housing for 3.5 inch for the standard nextion bezel by ledfreak3d](/t/8812255.jpg)
Nextion housing for 3.5 inch for the standard nextion bezel by ledfreak3d
...or 3.5 inch for the standard nextion bezel by ledfreak3d
thingiverse
nextion housing for 3.5 inch for the standard nextion bezel
thingiverse
free
![Nextion Housing 7"](/t/4907224.jpg)
Nextion Housing 7"
...nextion housing 7"
thingiverse
this is a housing for nextion 7 "
thingiverse
free
![Nextion 3.5" by bukvez](/t/8363923.jpg)
Nextion 3.5" by bukvez
...nextion 3.5" by bukvez
thingiverse
remix of the nextion 3.5" panel.
no side holes.
thingiverse
free
![Reference Nextion Display by bonsen](/t/9226739.jpg)
Reference Nextion Display by bonsen
...reference nextion display by bonsen
thingiverse
reference for a nextion display
thingiverse
free
![Nextion Racelogic by Bregfer](/t/8078106.jpg)
Nextion Racelogic by Bregfer
...nextion racelogic by bregfer
thingiverse
diy racelogic display for sim racing rigs. nextion screen using simhub software.
thingiverse
free
![nextion 2.4 enclosure by digital_technology_factory](/t/5033006.jpg)
nextion 2.4 enclosure by digital_technology_factory
...nextion 2.4 enclosure by digital_technology_factory
thingiverse
designed for 2.4 nextion display
thingiverse
free
![Nextion 43 Enclosure by etfrench](/t/8261881.jpg)
Nextion 43 Enclosure by etfrench
...nextion 43 enclosure by etfrench
thingiverse
nextion 43 enclosure designed in fusion 360.
thingiverse
free
![3.2 nextion bezel by ac0ax](/t/8295608.jpg)
3.2 nextion bezel by ac0ax
...3.2 nextion bezel by ac0ax
thingiverse
i used these on my ubitx for the 3.2 nextion screen
Hmi
turbosquid
$35
![12k HMI Fresnel.max](/t/13260303.jpg)
12k HMI Fresnel.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$9
![Nextion NX4832T035 35 Inch 480x320 HMI TFT LCD Touch Display Module](/t/11369950.jpg)
Nextion NX4832T035 35 Inch 480x320 HMI TFT LCD Touch Display Module
...cd touch display module
3dexport
nextion basic serie display nx4832t035 3d model, file formats step and iges. ------------------
3d_export
$545
![Automatic Filling And Capping Machine](/t/12845867.jpg)
Automatic Filling And Capping Machine
...bottles/min<br>+ dosing range 50 - 500 ml<br>+ setup in hmi screen<br>+ i have manufactured and tested the machine<br>best...
3dfindit
free
![Graphic panel (HMI)](/t/9159094.jpg)
Graphic panel (HMI)
...graphic panel (hmi)
3dfind.it
catalog: weidmueller
3dfindit
free
![GEN4-HMI INTELLIGENT DISPLAYS](/t/8455013.jpg)
GEN4-HMI INTELLIGENT DISPLAYS
...gen4-hmi intelligent displays
3dfind.it
catalog: 4d systems
thingiverse
free
![HMI Stand by kn0bY](/t/8354293.jpg)
HMI Stand by kn0bY
...with panels up to 12", maybe up to 15".
the maximum frame thickness 10mm (width of the gap that holds the screen frame)
thingiverse
free
![Siemens KTP400 HMI Stand by kevmakestuff](/t/8156105.jpg)
Siemens KTP400 HMI Stand by kevmakestuff
... kevmakestuff
thingiverse
stand for your ktp400 hmi. make it a bit easier to read the dang screen during your development phase.
thingiverse
free
![HMI Nextion base for electrical cabinet. by edgarhp](/t/8077780.jpg)
HMI Nextion base for electrical cabinet. by edgarhp
...arhp
thingiverse
base for hmi nextion model nx3224t024_011, for electrical cabinet, with recessed rear bracket. i add ipt files.
thingiverse
free
![HMI PEN FOR SIMATIC PANELS by Poschprint](/t/8291929.jpg)
HMI PEN FOR SIMATIC PANELS by Poschprint
...hmi pen for simatic panels by poschprint
thingiverse
pen and holder for an non capazitive display
thingiverse
free
![HMI Stand Legs by rc_mad](/t/8341017.jpg)
HMI Stand Legs by rc_mad
...also increase the stability. you may need to glue the feet on depending on the fitment. mine are tight enough to not require this
Enclosure
3d_export
free
![electrical enclosure](/t/11488039.jpg)
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
![GPU Enclosure](/t/13245994.jpg)
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
![Electrical Enclosure](/t/11943311.jpg)
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
![Enclosure 3D Model](/t/1080455.jpg)
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
![Enclosure 3D Model](/t/1080457.jpg)
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
![Enclosure 3D Model](/t/1080461.jpg)
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
![Enclosure 3D Model](/t/1080465.jpg)
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
![shower enclosure](/t/13299902.jpg)
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
![Dumpster Enclosure](/t/13375053.jpg)
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
![3d printer enclosure](/t/13286993.jpg)
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Buttons
archibase_planet
free
![Buttons](/t/947183.jpg)
Buttons
...buttons
archibase planet
lift elevator call buttons
elevator call buttons - 3d model for interior 3d visualization.
3ddd
$1
![Button](/t/718473.jpg)
Button
... button , john reeves
набор мебели button от дизайнера john reeves
3d_export
$5
![Button](/t/12700674.jpg)
Button
...button
3dexport
smd button<br>verts 2.180<br>faces 3.848
turbosquid
$4
![Button](/t/13298825.jpg)
Button
...
turbosquid
royalty free 3d model button for download as fbx on turbosquid: 3d models for games, architecture, videos. (1297941)
turbosquid
$1
![Button](/t/13245787.jpg)
Button
...
turbosquid
royalty free 3d model button for download as fbx on turbosquid: 3d models for games, architecture, videos. (1392935)
turbosquid
$9
![buttons](/t/13401643.jpg)
buttons
...id
royalty free 3d model buttons for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1404875)
turbosquid
$6
![button](/t/13393420.jpg)
button
...uid
royalty free 3d model button for download as 3dm and max on turbosquid: 3d models for games, architecture, videos. (1669204)
turbosquid
$5
![Button](/t/13343575.jpg)
Button
...uid
royalty free 3d model button for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1710868)
turbosquid
$3
![Button](/t/13377956.jpg)
Button
...quid
royalty free 3d model button for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1510524)
turbosquid
$3
![Button](/t/13377959.jpg)
Button
...quid
royalty free 3d model button for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1509961)
5
turbosquid
$6
![Rock 5-5](/t/13489585.jpg)
Rock 5-5
...urbosquid
royalty free 3d model rock 5-5 for download as obj on turbosquid: 3d models for games, architecture, videos. (1639063)
3d_export
$5
![hinge 5](/t/11920337.jpg)
hinge 5
...hinge 5
3dexport
hinge 5
turbosquid
$10
![A-5](/t/13295733.jpg)
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
![A-5](/t/13255822.jpg)
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
![Calligraphic Digit 5 Number 5](/t/13397640.jpg)
Calligraphic Digit 5 Number 5
...hic digit 5 number 5 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389333)
3ddd
$1
![5 роз](/t/618689.jpg)
5 роз
...5 роз
3ddd
5 роз в стеклянной вазе
design_connected
$11
![iPhone 5](/t/4569406.jpg)
iPhone 5
...iphone 5
designconnected
apple iphone 5 computer generated 3d model.
3ddd
$1
![Lola 5](/t/846327.jpg)
Lola 5
...lola 5
3ddd
miniforms
lola 5 miniforms 300*65*134
3ddd
$1
![Nexus 5](/t/702537.jpg)
Nexus 5
...dd
nexus , phone , телефон
google nexus 5 phone
3d_ocean
$15
![iPhone 5](/t/953927.jpg)
iPhone 5
...iphone 5
3docean
3d 4d apple cinema iphone model modeling phone screen texture
iphone 5 3d model and texture realistic iphone 5.