Thingiverse
Netgear GS116Ev2 (and similar) double wall mount bracket by noobydp
by Thingiverse
Last crawled date: 4 years, 9 months ago
Double wall mount for Netgear GS116Ev2 and similar switches.
I mounted a GS116 and GS108 which have the same profile, just different lengths.
Print 2, attach each to the wall and make sure they're level!
Spacing behind the bracket so you can run the power cables, the power plug gets jammed against the wall but it fits.
Its a very tight fit, you can slide the switches in from the side.
NOTE: The smaller end of the bracket is the top. The bottom of the switches have a ridge / folder in the case where the aluminium wraps around, there's a channel in the bracket to accommodate.
I mounted a GS116 and GS108 which have the same profile, just different lengths.
Print 2, attach each to the wall and make sure they're level!
Spacing behind the bracket so you can run the power cables, the power plug gets jammed against the wall but it fits.
Its a very tight fit, you can slide the switches in from the side.
NOTE: The smaller end of the bracket is the top. The bottom of the switches have a ridge / folder in the case where the aluminium wraps around, there's a channel in the bracket to accommodate.