Nespresso Dolce Gusto capsule holder by Skylled38

Last crawled date: 4 years ago

Customizable Dolce Gusto capsules stand
Description
This is a customizable stand for Dolce Gusto capsules. I designed it to be low profile but you can choose how many and which modules to use to customize its size.
Parts to print
For each 'level', you need :
plate.stl (x1) : ~40 minutes
bar_long.stl (x4) : ~20 minutes
Total print time : ~1 hour
For each angle, you need :
angle_long.stl (x1) : ~20 minutes
angle_medium.stl (x2) : ~20 minutes
angle_short.stl (x1) : ~5 minutes
For the end part, you need :
end_plate.stl (x1) : ~1 hour
bar_short.stl (x4) : ~5 minutes
Assembly
Glue is not required but I recommend using some to secure everything.
Print all the elements you need for each part (angle, 'level' or end)
Put the bars in each hole
Assemble each part

Print settings
Quality
0.2mm layer height
10% infill
50mm/sec print speed
Supports
Without supports
No raft