Thingiverse
NesCycler, by Roger Comas #CountertopChallenge by ruyer
by Thingiverse
Last crawled date: 4 years, 7 months ago
What happens when you have a Nesspreso coffee machine but there's no capsule with your favourite coffee flavour? or if you just want to save some money with larger coffee packages? or you just want to do a little recycling?
NesCycler is the answer!!A simple gadget that helps you empty, clean, refill and seal your capsules!
NesCycler is fully printed in 3D with makerbot or any other 3D printer.It's easy! Just follow this 4 simple steps:
1 - Press and rotate the capsule in the cleaning part.
2 - Refill the capsule with the desired coffee and compress it with the pressing tool.
3 - Put a piece of aluminium paper over the capsule and cut it with the cutting tool.
4 - Seal the capsule by pressing the two lateral parts.
Simple! right?
You have your new refilled capsule to enjoy any coffee you want with your marvelous machine. With some practice you could do the whole process in less than a minute!
NesCycler, by Roger Comas
CountertopChallenge
NesCycler is the answer!!A simple gadget that helps you empty, clean, refill and seal your capsules!
NesCycler is fully printed in 3D with makerbot or any other 3D printer.It's easy! Just follow this 4 simple steps:
1 - Press and rotate the capsule in the cleaning part.
2 - Refill the capsule with the desired coffee and compress it with the pressing tool.
3 - Put a piece of aluminium paper over the capsule and cut it with the cutting tool.
4 - Seal the capsule by pressing the two lateral parts.
Simple! right?
You have your new refilled capsule to enjoy any coffee you want with your marvelous machine. With some practice you could do the whole process in less than a minute!
NesCycler, by Roger Comas
CountertopChallenge