Thingiverse
Nescafe Dispenser for 2017/18 glass bottle by TTGeek
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is a remix with an updated design to fit the current nescafe bottle. The bottle has an outer diameter of 57.1mm, including the threads, at its opening. The bottle is also more rectangular than the old bottle.
See https://www.youtube.com/watch?v=tqcsF8uFTTg for a demo of how it works and how to assemble it. Obs, the video show the old bottle, not the new one. See the images for the bottle that these files fit to.
Note also that this design requires you to take the foam from inside the nescafe bottle lid, make some cutouts and then stick it into the printed lid.
Note that the hole in the top part and the hole in the limiter should be on opposite sides. Otherwise you might just pour the whole bottle directly into your coffee cup. Adjust their relative position to each other by changing the pin's position in the top part. The limiter all ways need to be screwed on as tight as possible without braking the print.
You might want to try the screws into the doser, before you do the assembly. it just goes smoother the second time you screw and makes for more easy assembling.
Usage instructions:
Position the nescafé bottle over your mug. Turn the bottom part half a turn and coffee should come out the other end.
Check out other useful prints over at www.youtube.com/ttgeek
I've been working on this design for 3 days now, so i'd appreciate a coin or two if you find it useful. Thanks!
See https://www.youtube.com/watch?v=tqcsF8uFTTg for a demo of how it works and how to assemble it. Obs, the video show the old bottle, not the new one. See the images for the bottle that these files fit to.
Note also that this design requires you to take the foam from inside the nescafe bottle lid, make some cutouts and then stick it into the printed lid.
Note that the hole in the top part and the hole in the limiter should be on opposite sides. Otherwise you might just pour the whole bottle directly into your coffee cup. Adjust their relative position to each other by changing the pin's position in the top part. The limiter all ways need to be screwed on as tight as possible without braking the print.
You might want to try the screws into the doser, before you do the assembly. it just goes smoother the second time you screw and makes for more easy assembling.
Usage instructions:
Position the nescafé bottle over your mug. Turn the bottom part half a turn and coffee should come out the other end.
Check out other useful prints over at www.youtube.com/ttgeek
I've been working on this design for 3 days now, so i'd appreciate a coin or two if you find it useful. Thanks!