Thingiverse
Nerf Retaliator/Recon 100ml syringe exPT & support by BlasterRevolution
by Thingiverse
Last crawled date: 4 years, 6 months ago
Using a 100ml syringe (available off eBay for about $1 - $2), create an expanded direct plunger system for Nerf Retaliators & Recons without purchasing core components.
(Only bought items for mine are the Worker 5kg spring and catch spring.)
Disclaimer:
Modify at your blaster at your own risk!
Do not aim at eyes or face!
This does require copious amount of tuning.
(If you are not exactly the adventurous type and looking for a simple solution, look up Worker's Prophecy blaster & drop-in kit)
Goal is to have a printable version to update Recons using it's original reverse plunger bolt with only 3D printed parts and a syringe.
Retaliator bolt with AR on Elites darts:
5kg approx 80FPS
7kg approx 90FPS
Recon bolt w/o AR on Elite darts:
5kg approx 70FPS
5kg brassed approx 95FPS
For recon internals:
exPT-passthruL is a larger opening for reusing the original recon bolt and o-ring area. Cut off the thicker o-ring area, shorten the remaining bolt accordingly (measure twice cut once, you need it just right) and re-attach the oring portion at the end with a good 2 part epoxy. Working on a catch now.
Installation instruction (click into each photo for specifics)https://www.facebook.com/media/set/?set=a.1683713478346458.1073741834.290599730991180&type=1&l=cd3ebe1708
and for more of Nerf shenanigans, check out https://www.facebook.com/blasterrevolution
(Only bought items for mine are the Worker 5kg spring and catch spring.)
Disclaimer:
Modify at your blaster at your own risk!
Do not aim at eyes or face!
This does require copious amount of tuning.
(If you are not exactly the adventurous type and looking for a simple solution, look up Worker's Prophecy blaster & drop-in kit)
Goal is to have a printable version to update Recons using it's original reverse plunger bolt with only 3D printed parts and a syringe.
Retaliator bolt with AR on Elites darts:
5kg approx 80FPS
7kg approx 90FPS
Recon bolt w/o AR on Elite darts:
5kg approx 70FPS
5kg brassed approx 95FPS
For recon internals:
exPT-passthruL is a larger opening for reusing the original recon bolt and o-ring area. Cut off the thicker o-ring area, shorten the remaining bolt accordingly (measure twice cut once, you need it just right) and re-attach the oring portion at the end with a good 2 part epoxy. Working on a catch now.
Installation instruction (click into each photo for specifics)https://www.facebook.com/media/set/?set=a.1683713478346458.1073741834.290599730991180&type=1&l=cd3ebe1708
and for more of Nerf shenanigans, check out https://www.facebook.com/blasterrevolution