Nerf Recon and Retaliator EXPT Supports by Flechette_Spectre

Last crawled date: 3 years, 1 month ago

UPDATE:
the files are really out of date and there are a lot of issues with installation, including parts being too thin, not being able to close the shell, etc.
It has also come to my attention that this does not work with worker Expanded plunger tube.
Expanded Plunger Tube (EXPT) supports for Nerf Recon and Retaliator Models.
used to hold your EXPT in position and support the shell from cracking from the stress.
remember to pad your inside of the tube to dampen the impact.
suitable with multiple types of EXPT tubes, including homemade types, and the really rare, Derelin EXPT tube and plunger rod.
[Yellow Box]
The small tiny pieces are to be glued into the spaces between the "ridges" at the top of the retaliator shell internals.
they should all be a tight fit.
[Red Hatching]
you are required to cut off the ridges in the stock PT area as cleanly as possible.
[Blue Arrow]
as for the "arrow-shaped" part, fit and align your expt with your plunger head and breech, then get the location of where the "arrow" should be, the front of the "arrow" should be pointing towards the front of the blaster.
DISCLAIMER: The files are old AF, designed for older models of EXPT, and edits were made when I have already left the hobby. if it works, good. if it doesn't, then it won't.
an EXPT is a pretty advance mod for your nerf retaliator. so understand it and how it works, before attempting to perform the mod yourself