Thingiverse
Nerf Rapidstrike Switch Plate and Triggers by ahalekelly
by Thingiverse
Last crawled date: 4 years, 1 month ago
A switch plate for the Rapidstrike to use full size microswitches, making construction of the Rapidstrike vastly easier.
The printed rev trigger is required because it is different from the stock one, but you can use the stock main trigger by cutting down the top and rear. Any full size switches will work for the two triggers, but the cycle control switch requires a specific roller lever, the Temco CN0098 or Omron V-216-1C6. For the screws, use M3 x 14mm pan head, or you can't get those, M3 x 16mm flat head will work.
If you want to buy or sell this, see my Distributors page
The printed rev trigger is required because it is different from the stock one, but you can use the stock main trigger by cutting down the top and rear. Any full size switches will work for the two triggers, but the cycle control switch requires a specific roller lever, the Temco CN0098 or Omron V-216-1C6. For the screws, use M3 x 14mm pan head, or you can't get those, M3 x 16mm flat head will work.
If you want to buy or sell this, see my Distributors page