Cults
Nerf Explosive Tips - Party Snap Foam Dart Tips
by Cults
Last crawled date: 6 years, 6 months ago
For some added explosive fun during your next Nerf War, I've made a 3D printable replacement tip for foam darts that holds "party snaps" that explode on impact!
The tips are made to leave about 1-2mm of the "party snap" exposed at the tip while holding the snap securely for active Nerf play. I've tested the darts up to 50 feet away from a smooth surface (garage door) and they still explode on impact. I've tested well over a hundred rounds and haven't had a single jam as the tip fits perfectly with the foam dart.
Disclaimer: I ADVISE THAT YOU DO NOT SHOOT THESE AT PEOPLE OR ANIMALS
I tested these with PLA, PETG, and TouchInk (a semi-flexible filament) and the best results were with PLA.
For instructions and testing results, please view the video at: https://youtu.be/stezC9FAD3E
The tips are made to leave about 1-2mm of the "party snap" exposed at the tip while holding the snap securely for active Nerf play. I've tested the darts up to 50 feet away from a smooth surface (garage door) and they still explode on impact. I've tested well over a hundred rounds and haven't had a single jam as the tip fits perfectly with the foam dart.
Disclaimer: I ADVISE THAT YOU DO NOT SHOOT THESE AT PEOPLE OR ANIMALS
I tested these with PLA, PETG, and TouchInk (a semi-flexible filament) and the best results were with PLA.
For instructions and testing results, please view the video at: https://youtu.be/stezC9FAD3E
Similar models
cults
free
Nerf MEGA Explosive Tips - Party Snap Foam Dart Tips
... shoot these at people or animals
for instructions and testing results, please view the video at: https://youtu.be/ybzklpjmo1i
cults
free
Nerf / Foam Dart: Alternative Tips of Doom
...rf/foam dart guns.
disclaimer: do not shoot these at people or animals!
youtube video of testing: https://youtu.be/ffrio7a7lds
cults
free
"Party Snap" Grenade
...75% or larger based on my testing.
for instructions and testing results, please view the video at: https://youtu.be/_bee5ixedss
cults
$12
Nerf Stock holds 2 Clips
...t piece of a retaliator stock that you have to unscrew first. but then your stock can be firmly attached but also easily removed.
cults
free
Case for Beaglebone and LCD panel
...rinting in abs please be patient, abs prints of the buttons are a little finicky. you should use an obedient filament for those.
cults
free
Rick and Morty's Ray Gun - shoots NERF darts
...
you will need a spring to use it.
most parts are printed with 15% infill except stronger parts like trigger and pin mechanism.
cults
free
Thirst Zapper from Fallout - Shoots NERF darts
... thirst zapper
this is my 2nd functional nerf weapon!
https://youtu.be/i1ysaewrxzw
you will need a spring to be able to use it.
cults
free
PLA dart
...pla dart
cults
plane paper art flying paper plane
a printing paper dart!
cults
free
Thing 1 and Thing 2
... up using heat or a file. it can close up due to first layer flattening.
"and then he was gone
with a tip of his hat."
cults
free
Hex Tile Fidget Spinner
...
i recommend abs filament to print this model. pla is too hard for snap fitting.
now i'm developing connector pin remover.
Nerf
cults
free
Nerf support
...nerf support
cults
nerve square support
square to hang the nerves on the wall!
cults
$7
Nerf Gun Acog Sight
...fication or adjustment, purely cosmetic.
size: approximately 140mm long
width approximately 5cm
height approximately 9cm
cults
free
Nerf Dart Target
...ded design software) check out this follow-along video tutorial to learn how to use onshape and model for multi-body 3d printing.
cults
free
Thirst Zapper from Fallout - Shoots NERF darts
... thirst zapper
this is my 2nd functional nerf weapon!
https://youtu.be/i1ysaewrxzw
you will need a spring to be able to use it.
cults
free
Nerf / Foam Dart: Alternative Tips of Doom
...rf/foam dart guns.
disclaimer: do not shoot these at people or animals!
youtube video of testing: https://youtu.be/ffrio7a7lds
cults
$12
Nerf Stock holds 2 Clips
...t piece of a retaliator stock that you have to unscrew first. but then your stock can be firmly attached but also easily removed.
cults
free
Rick and Morty's Ray Gun - shoots NERF darts
...
you will need a spring to use it.
most parts are printed with 15% infill except stronger parts like trigger and pin mechanism.
cults
free
Nerf MEGA Explosive Tips - Party Snap Foam Dart Tips
... shoot these at people or animals
for instructions and testing results, please view the video at: https://youtu.be/ybzklpjmo1i
cults
free
Picatinny Rail Foregrip
...atachment cool easy print engineering foregrip fun gun grip nerf atatchment nerfgun nerf_barrel nerf_blaster picatinny picatinny_mount picatinny_rail this is...
Explosive
cults
free
Rambo Explosive Arrowhead (REPLICA)
...mp;amp;_trksid=p2055119.m1438.l2649
!don't forget to check out my other designs and follow my daily kookoo uploads, enjoy ;)
cults
free
Nerf MEGA Explosive Tips - Party Snap Foam Dart Tips
... shoot these at people or animals
for instructions and testing results, please view the video at: https://youtu.be/ybzklpjmo1i
cults
free
Cloudy shape
...
a artistic shape of a berry/explosion er something alike :p
printed with: https://www.goedkope3dfilamenten.nl/basic-pla-zwart/
cults
$12
the Rhino Pendant
...the animal and also his underlying internal energy and explosiveess through the flowing lines that makes this model. this...
cults
$5
Bioinspired Egg cup
...dining dish eggbot eggcup eggpot food gift meal plastic explosive pot print printable printing memory model download printed breakfast...
cults
free
Gale Crater
...ct punched a hole in the terrain. the explosion ejected rocks and soil that landed around the crater.
author/origin: richard kim
cults
free
Delphine Frame
...upon closer inspection, reads a bit nautical with its explosive wave motif. delphine seems to come from flora of...
cults
$6
Coil holder
...coil holder cults support coil filament door wire plastic explosive platic here is a very nice support for your...
cults
free
The Shower of Tomorrow
...shower of tomorrow cults shower bathroom minecraft lowpoly extreme explosive water spray control touchscreen nuclear vent ventilation terrace table...
Dart
cults
free
PLA dart
...pla dart
cults
plane paper art flying paper plane
a printing paper dart!
cults
free
Star Darts
...original shuriken: just throw it spinning, either horizontally or vertically.
watch us using it at: https://youtu.be/xbyg3s8jl3w
cults
free
Dart Fridge Magnet
... hole
m3 x 6mm l countersunk screw
!don't forget to check out my other designs and follow my daily kookoo uploads, enjoy ;)
cults
free
Dart for LWC Falax
...ingiverse.com/thing:2617496
!don't forget to check out my other designs and follow me for my weekly kookoo uploads,
enjoy ;)
cults
free
Nerf / Foam Dart: Alternative Tips of Doom
...rf/foam dart guns.
disclaimer: do not shoot these at people or animals!
youtube video of testing: https://youtu.be/ffrio7a7lds
cults
free
Nerf Dart Target
...ded design software) check out this follow-along video tutorial to learn how to use onshape and model for multi-body 3d printing.
cults
free
NON LETHAL DARTS ( AIRGUN CROSSBOW)
...ethal darts ( airgun crossbow)
cults
this can be shot through the co2 air gun i designed...enjoy
use 8 mm od 6 mm id carbon pipe
cults
free
Rick and Morty's Ray Gun - shoots NERF darts
...
you will need a spring to use it.
most parts are printed with 15% infill except stronger parts like trigger and pin mechanism.
cults
free
Foam Dart GUN (pullback loading)
...you want a nice and smooth fit you have to sand the cylinder and barrel.
assembling and test video: https://youtu.be/g2fyyax5hda
Foam
cults
free
Nerf / Foam Dart: Alternative Tips of Doom
...rf/foam dart guns.
disclaimer: do not shoot these at people or animals!
youtube video of testing: https://youtu.be/ffrio7a7lds
cults
free
Foam Dart GUN (pullback loading)
...you want a nice and smooth fit you have to sand the cylinder and barrel.
assembling and test video: https://youtu.be/g2fyyax5hda
cults
free
Nerf MEGA Explosive Tips - Party Snap Foam Dart Tips
... shoot these at people or animals
for instructions and testing results, please view the video at: https://youtu.be/ybzklpjmo1i
cults
$7
Protection for DJI Spark
...for dji spark drone https://youtu.be/dxnnth0g6cc + a piece of foam can be placed there so that the camera does...
cults
free
Extension Faucet
...(be careful, superglu glues do not adhere to the foam. 2 countersunk screws and 2 nuts m4x50 are to...
cults
$2
Fluval Edge Aquarium Filter 23 or 46 liters / Fluval Edge Aquarium Filter 23 or 46 liters
...and increase practicality. these bins can be filled with foam filter media ... these bins can replace easyboxes or...
cults
$1
HDMI Cable Support
...screw. the back panel fits 1/2" (12mm) double stick foam tape for use with screwless applications or other cables...
cults
$1
car radio pouch
...both axles provide a flat head it takes 5mm foam to get the car radio to the maximum it...
cults
free
Sleep Number Remote Holder
...nightstand, or even head board. you can add double-sided foam tape and mount it. by the way, my sleep...
Party
cults
$5
Party Popper Cannon
...party popper cannon
cults
party popper cannon
party popper cannon
cults
free
Football Party Picks
...football party picks
cults
football party picks
football party picks
cults
free
Party Spaceman 2015
...party spaceman 2015
cults
party spaceman 2015
party spaceman 2015
cults
free
Party Glasses for Grenoble
...unettes de fête 3dhubs grenoble france
these are the party glasses for grenoble! make sure you upload your make if you print one!
cults
free
Cannon Fodder for Party Popper Cannon
...cannon fodder for party popper cannon
cults
cannon fodder for party popper
cannon fodder for party popper cannon
cults
free
Slisk Raiding Party (18mm scale)
...slisk raiding party (18mm scale)
cults
slisk raiding party (18mm scale)
slisk raiding party (18mm scale)
cults
free
Party Noisemaker
...d chamber makes it quite loud.
i've made two so far. uses 4-5 us pennies as weight inside sound chamber.
see instructions.
cults
free
Memorial Day Party Picks and Sticks
...s. for info on purchasing samples of 6 different types of flexible filament go to [flexyfilament.com](http://flexyfilament.com/)
cults
free
Fourth of July Party Pack
...y pack here:
https://cults3d.com/en/home/canada-day-party-pack
fourth of july coaster:
https://www.thingiverse.com/thing:2412020
cults
free
3D Printed Party Popper Pistol
...he frame to copy the shape. (see picture). attach with superglue, only on one half of the frame. now you can still take it apart.
Snap
cults
free
Snap Ring
...n finding many application in 3d printing prototypes. these can even be used to hold bearings inside of a fidget spinner. enjoy!
cults
free
Gnomedozer, Snap-fit Model
...gnomedozer, snap-fit model
cults
gnomedozer snap-fit model
gnomedozer, snap-fit model
cults
free
3D Printed Ornaments (Snap Together)
...3d printed ornaments (snap together)
cults
3d printed ornaments (snap together)
3d printed ornaments (snap together)
cults
$6
Snap In BMW Z4
...ir une passerelle numérique dension. plus besoin d'aller farfouiller dans la boite à gant !!
imprimé sur zortrax m200 en abs.
cults
$13
Snap-Fit Passenger Airplane
...ewest aircraft to date.
the wings in this model are bent upwards replicating flight conditions that the real aircraft encounters.
cults
free
Snap cube, interlocking, math, snap cubes
...using fusion 360.
please use an infill greater than 20% for strength and try the fairly tight version, to begin with. have fun!
cults
free
Thanksgiving Dinner SNAP-OUT
...splay)
featuring a live turkey, a cooked turkey, a cornucopia, cranberry sauce, pie, a wishbone, a gravy boat, and a pilgrim hat
cults
free
12G Snap Caps
...ml hex bolt
4 mm id spring x 25mm l
!don't forget to check out my other designs and follow my weekly kookoo uploads, enjoy ;)
cults
free
BBC micro:bit snap-together case
...ase micro bit micro:bit micro:bit case
bbc micro:bit snap-together case
-with or without logo
-the fit could be a little tighter
cults
free
Snap-in Spool Holder for 8020
...o snap in, should make it easy to rack/pack lots of filament spools on an 8020 bar. it can take spools that are up to 95mm wide.
Tips
cults
$5
Tip of a screw pile
...tip of a screw pile
cults
drilling_end pile screw_pile
tip of a screw pile.
maybe it is useful to whom.
tip full-scale.
cults
free
Beyblade Toupie Tip
...beyblade toupie tip
cults
top beyblade spin toy thu point
a simple tip for beyblade toupie.
cults
$2
Hollow blade tip
...w blade tip
cults
lightsaber pixel blade string blade
a hollow lightsaber blade tip designed for use with string and pixel blades
cults
free
Funnel with tip / Funnel
...funnel with tip / funnel
cults
funnel
funnel with tip ø 7 mm to screw.
large ø: 67 mm
small ø: 16 mm
cults
free
Wide tip for Ryobi One+ Vacuum
...wide tip for ryobi one+ vacuum
cults
wide tip for ryobi one+ vacuum
wide tip for ryobi one+ vacuum
cults
free
Weller (WESD51) Soldering Tip Storage Box
...ller (wesd51) soldering tip storage box
cults
weller (wesd51) soldering tip storage box
weller (wesd51) soldering tip storage box
cults
free
Christmas tree tip
...ecoration
after designing the 3d model with the pro-e software, i realized the printing for the decoration of our christmas tree.
cults
free
Nerf / Foam Dart: Alternative Tips of Doom
...rf/foam dart guns.
disclaimer: do not shoot these at people or animals!
youtube video of testing: https://youtu.be/ffrio7a7lds
cults
free
Nerf MEGA Explosive Tips - Party Snap Foam Dart Tips
... shoot these at people or animals
for instructions and testing results, please view the video at: https://youtu.be/ybzklpjmo1i