Thingiverse
![NerdCopter by quadmodder](/previews/8944173.jpg)
NerdCopter by quadmodder
by Thingiverse
Last crawled date: 3 years, 1 month ago
NerdCopter is my attempt at a 300mm fpv racing quad. The idea to keep as much of the fpv in the clean section as possible, while leaving the copter untouched. This makes it easy to swap out your fpv for different cameras, frequencies, etc. The frame is pretty stiff, and should hold up to 2300kv motors at 4s with 6 inch props. I posted this version early, because I had quite a few people waiting for it. I hope it doesn't disappoint. Top deck mods and cam mounts are coming very soon. I'll be posting more stuff at nerdcopter.com, as well as links to all of the parts in my BOM as things progress. I won't be selling these frames, but if you want to buy me a beer to keep hacking on this, go to the site for instructions.
2-17-15
Added top section for APM, or other stuff. I'll be working on making it lighter now. Considering I set it up for 6 inch props at 4s 2300kv, 206g is actually not bad if it's tough.
2-23-15
Maiden flight with Naze32 Acro (Cleanflight), RVPOWER 2300kv motors, lumenier 12A nfet ESC, 6x3 gemfan, and 1800 3s. Going to switch to 4s now on t-motor 6x2. Maiden was perfect out of the box.
Thanks for watching.
Enjoy!
Thanks, and enjoy.
2-17-15
Added top section for APM, or other stuff. I'll be working on making it lighter now. Considering I set it up for 6 inch props at 4s 2300kv, 206g is actually not bad if it's tough.
2-23-15
Maiden flight with Naze32 Acro (Cleanflight), RVPOWER 2300kv motors, lumenier 12A nfet ESC, 6x3 gemfan, and 1800 3s. Going to switch to 4s now on t-motor 6x2. Maiden was perfect out of the box.
Thanks for watching.
Enjoy!
Thanks, and enjoy.
Similar models
thingiverse
free
![Remixed 12 degree pitch ZMR250 arms to suit Multistar 2204/2300kv motors and 6 inch props by lemuba](/t/8937237.jpg)
Remixed 12 degree pitch ZMR250 arms to suit Multistar 2204/2300kv motors and 6 inch props by lemuba
... multistar 2204/2300kv motors and 6 inch props.
printed with esun petg for highest strength and to keep a certain flexibility.
thingiverse
free
![universal 250 class quad prop guards by NIelsHeemstra](/t/8888629.jpg)
universal 250 class quad prop guards by NIelsHeemstra
...ge. help out the community and ofcourse your name will be mentioned with your creation!
updates:
**6 inch prop, 2206 motor added.
thingiverse
free
![Dual motor 6 inch prop plane mount fpv fixed wing by TurtleBFpv](/t/8284389.jpg)
Dual motor 6 inch prop plane mount fpv fixed wing by TurtleBFpv
... adapt 2 motors swinging 6 inch props.
have not tested yet but i'm pretty confident itll work out fine. no supports required
thingiverse
free
![Squeech V12 by jakewells](/t/8719206.jpg)
Squeech V12 by jakewells
...-2300kv motors up to 4 inch props. i personally use a run cam night own fpv cam which fits. haven't tested any other cameras.
thingiverse
free
![PEON X FRAME by 3D-P-Hobby](/t/8071921.jpg)
PEON X FRAME by 3D-P-Hobby
... the rest of the parts are compatible with the original.
for the top part i drilled holes in order for the screws to go in enjoy.
thingiverse
free
![LIT-AF (Acro 5inch FPV Quad) by mongdex](/t/8781967.jpg)
LIT-AF (Acro 5inch FPV Quad) by mongdex
...ou crash a 3d printed quadcopter, it doesn't make a difference if you print with 10% or 100% it's going to break anyways.
thingiverse
free
![Fx230 fpv quadcopter by crysis_ps](/t/8666680.jpg)
Fx230 fpv quadcopter by crysis_ps
...is frame allows to fly with 5 or 6 inch propellers.
for example, for me: 5 inch with 4s batteries and 6 inch - with 3s batteries.
thingiverse
free
!['Shipping Crate' case for 6045 multi-rotor propellers by bradmc](/t/8764901.jpg)
'Shipping Crate' case for 6045 multi-rotor propellers by bradmc
...e crate top fits down around the posts. if it loosens up over time, i'll go back to my original plan of using a rubber band.
thingiverse
free
![Arms for Tarot TL250H suitable for 6 inch props and 23XX motors by miginv](/t/8881002.jpg)
Arms for Tarot TL250H suitable for 6 inch props and 23XX motors by miginv
...!):http://bit.ly/1yfneni
i hope you enjoy them. just like it and share it so, in order to motivate me to do free designs.
thanks.
thingiverse
free
![3inch hex frame with canopy by Jandre_fpv](/t/8125039.jpg)
3inch hex frame with canopy by Jandre_fpv
... frame
1206 to 1507 motors
20x20 fc and esc
3 inch props
i do suggest you cut the frame out of carbon fiber
made for nano fpv cam
Quadmodder
thingiverse
free
![Fluval Evo 13.5 Light Vent by quadmodder](/t/8073734.jpg)
Fluval Evo 13.5 Light Vent by quadmodder
...fluval evo 13.5 light vent by quadmodder
thingiverse
fixed an overheating problem.
thingiverse
free
![Gimbal Bushing keeper. by quadmodder](/t/8988307.jpg)
Gimbal Bushing keeper. by quadmodder
...r
thingiverse
push one of these into each of your brushless gimbal bushings to keep it from popping out of your frame so easily.
thingiverse
free
![QAV400 Arm by quadmodder](/t/8935767.jpg)
QAV400 Arm by quadmodder
... some filleting to make them a bit stronger. this is a ground up drawing. printing it now. i'll let you know how they fit.
thingiverse
free
![Ov3rquad by quadmodder](/t/8976215.jpg)
Ov3rquad by quadmodder
...v3rquad-open-source-diy-fpv-frame-for-all/ . it's a little old, but i'm planning on reviving it in my neck of the woods.
thingiverse
free
![Blenny Blocker by quadmodder](/t/8083001.jpg)
Blenny Blocker by quadmodder
...out printing it. you can notch out more room for cables by hand, or let me know, and i'll make a better hole in the drawing.
thingiverse
free
![Xugong 10 DJI GPS Mount by quadmodder](/t/8949902.jpg)
Xugong 10 DJI GPS Mount by quadmodder
...e to fold my copter, but it was a few inches too tall. i made this mount to solve the problem. work in progress. pics to come.
thingiverse
free
![Folgertech2020 cube corner by quadmodder](/t/8841344.jpg)
Folgertech2020 cube corner by quadmodder
...ersunk 6mm now. i attached the solidworks drawing, in case you need to tweak it. so far it seems strong enough. time will tell.
thingiverse
free
![QAV250 Landing Gear V1 by quadmodder](/t/8948425.jpg)
QAV250 Landing Gear V1 by quadmodder
... scraping your pdb when landing. i printed them in ninjaflex, and used a 3x10 hex with a matching nylock. simple but effective.
thingiverse
free
![TBS Discovery battery and TX holder by quadmodder](/t/8982975.jpg)
TBS Discovery battery and TX holder by quadmodder
...anymore. if this works, let me know, or lt me know what to tweak. i'll post the skp when it's closer to done.
thanks!
Nerdcopter
thingiverse
free
![EmuFlight logo pucks for remix or stamping by nerdCopter](/t/8349588.jpg)
EmuFlight logo pucks for remix or stamping by nerdCopter
...ter
thingiverse
emuflight icon logo pucks for remix or stamping.
this is not for direct printing as some elements will fall out.
thingiverse
free
![LG TV 47LM6700-UA Speaker Scoops by nerdCopter](/t/8343601.jpg)
LG TV 47LM6700-UA Speaker Scoops by nerdCopter
...ad printable: https://www.tinkercad.com/things/92zabgotopj
tinkercad display model: https://www.tinkercad.com/things/4lr5bfjvbdn
thingiverse
free
![1000uf Capacitor Sling TPU mount by nerdCopter](/t/9689472.jpg)
1000uf Capacitor Sling TPU mount by nerdCopter
...do not commercialize without consent or agreement.
if this is a remix, please follow original designer's limitations as well.
thingiverse
free
![iFlight XL7 Stubby Strap-on by nerdCopter](/t/8366055.jpg)
iFlight XL7 Stubby Strap-on by nerdCopter
...eights are 2mm. overall width is 34.5mm and height is 40mm.
this may be modified at any time after i receive my tpu for printing.
thingiverse
free
![Creality Ender 5 Tool Box by nerdCopter](/t/8360216.jpg)
Creality Ender 5 Tool Box by nerdCopter
...nkercad.com/things/lieqhav2lz9
ignore my crappy print, i did so at draft resolution and cura's ender 5 defaults 0.28mm suck.
thingiverse
free
![xLite Nippy [remix of Nippy] by nerdCopter](/t/9680809.jpg)
xLite Nippy [remix of Nippy] by nerdCopter
...do not commercialize without consent or agreement.
if this is a remix, please follow original designer's limitations as well.
thingiverse
free
![Ender 5 CE5 SDCard Slot Guide Cover by nerdCopter](/t/8356925.jpg)
Ender 5 CE5 SDCard Slot Guide Cover by nerdCopter
...ht-side in.
you may remix yours here: (hint: there are plenty of groups to un-group) https://www.tinkercad.com/things/dchh49ltfwk
thingiverse
free
![Caliper Pen CaliPen by nerdCopter](/t/8350401.jpg)
Caliper Pen CaliPen by nerdCopter
...ate due to pla shrinkage. :(
metric held better than imperial.
tinkercad workspace: https://www.tinkercad.com/things/csqqfizflhf
thingiverse
free
![Slotted Top Shelf by krisp](/t/8936080.jpg)
Slotted Top Shelf by krisp
...shelf by krisp thingiverse slotted top shelf plate for nerdcopter updated model with third strap slot in the middle...