Thingiverse
![NEJE Laser Guard with Thumbscrew by Zer010](/previews/8356886.jpg)
NEJE Laser Guard with Thumbscrew by Zer010
by Thingiverse
Last crawled date: 3 years, 2 months ago
After reading hundreds of post about building huge enclosures for lasers I decided that the only thing I really needed was to enclose was the laser light, not the whole machine.
This is printed on a SLA printer with clear resin utilizing 5 drops per vat of orange alcohol ink. After mixing it produces a print that blocks about 90% of the light emitted by a NEJE 20w laser. This was verified with a spectrometer.
This is printed on a SLA printer with clear resin utilizing 5 drops per vat of orange alcohol ink. After mixing it produces a print that blocks about 90% of the light emitted by a NEJE 20w laser. This was verified with a spectrometer.
Similar models
thingiverse
free
![Neje 40watt laser fixed focus block 22mm by mfann72](/t/9680915.jpg)
Neje 40watt laser fixed focus block 22mm by mfann72
...ocus laser figured someone else might be able to use it
you might print this 1% bigger mine shrank to 21.78mm after printin
thingiverse
free
![NEJE 3500mW Laser - Air Assist 40mm fan by madcreator](/t/5043588.jpg)
NEJE 3500mW Laser - Air Assist 40mm fan by madcreator
...0mm fan by madcreator
thingiverse
print with support.
add a 40mm fan to it with m3 bolt.
put it at the very bottom of neje laser
thingiverse
free
![Neje / KkMoon Holder for Laser](/t/4788302.jpg)
Neje / KkMoon Holder for Laser
...
i destroyed my laser engraving holder of my neje master / kkmoon, so i designed a new one in fusion 360.
100% infill, enjoy it!
thingiverse
free
![NEJE Laser Engraver - Laser Mount Extender by brettcarroll](/t/8270584.jpg)
NEJE Laser Engraver - Laser Mount Extender by brettcarroll
...e placed closer to the bed.
designed for use on the neje dk 5 laser engraver, but should work on all neje laser engraver/cutters.
thingiverse
free
![Neje 30/40w laser modul air assist holder by tintek](/t/9253259.jpg)
Neje 30/40w laser modul air assist holder by tintek
...it's designed for 1mm needle and the angle can be adjusted.
needle just plug to compressed air about 1-1,5bar work just fine.
thingiverse
free
![NEJE Laser Engraver Focus Wheel by archie73](/t/8314636.jpg)
NEJE Laser Engraver Focus Wheel by archie73
...need to adjust for your printers tolerances, but it has about +0.8mm on the diameter of the lense. (12mm)
fits neje laser diodes.
thingiverse
free
![NEJE Laser Focus Knob by buckeyes1997](/t/5041137.jpg)
NEJE Laser Focus Knob by buckeyes1997
...ingiverse
this is a larger outter focus knob for the neje laser head. it fits snug over the existing laser knob for the optics.
thingiverse
free
![Neje master2s 30W airsupport by boudy73](/t/9241557.jpg)
Neje master2s 30W airsupport by boudy73
...cause i want to keep the wheel accessibility for adjusting the laser before printing/lasering.
place it straightup, with support.
thingiverse
free
![neje 30/40 watt z axis adjuster by dav88](/t/8351854.jpg)
neje 30/40 watt z axis adjuster by dav88
... own knob, threaded rod and nuts.
i made this to be laser cut from 1/8 in plywood or acrylic.
but you can 3d print the parts too.
thingiverse
free
![High Stand for Neje Lasers](/t/4896088.jpg)
High Stand for Neje Lasers
...ing. it raises the laser up about 11 cm. i may need to design a new bigger stand when i start engraving objects higher than 10cm.
Zer010
thingiverse
free
![Star of David Spinner by Zer010](/t/8704804.jpg)
Star of David Spinner by Zer010
... place for weight and bearing. spins ok, but slightly wobbly, still working on it. i will probably double the weight locations.
thingiverse
free
![Geo Tracker Soft Top roof clip by Zer010](/t/8706608.jpg)
Geo Tracker Soft Top roof clip by Zer010
...retty specific on the spring type i thought i should make a more universal one just in case you couldn't find the oem spring.
Neje
thingiverse
free
![Neje Master Risers](/t/4897287.jpg)
Neje Master Risers
...neje master risers
thingiverse
this is risers for the neje master. there is a left and right part.
the neje master lifted 5cm
thingiverse
free
![Ortur NEJE Adapter by Zimmant](/t/8164193.jpg)
Ortur NEJE Adapter by Zimmant
... carriage.
"neje back plate v1.stl" is a quick adapter plate that is untested.
both use a captive design for m3 nuts.
thingiverse
free
![NEJE Laser Mount by buckeyes1997](/t/5031554.jpg)
NEJE Laser Mount by buckeyes1997
...ap neje 7w laser. the mount has 4 holes for the m3 screws to the laser body and 3 holes for mounting on a frame or machine base.
thingiverse
free
![Neje / KkMoon Holder for Laser](/t/4788302.jpg)
Neje / KkMoon Holder for Laser
...
i destroyed my laser engraving holder of my neje master / kkmoon, so i designed a new one in fusion 360.
100% infill, enjoy it!
thingiverse
free
![Neje master Adjustable Z axis by Zig1100](/t/8086896.jpg)
Neje master Adjustable Z axis by Zig1100
...neje master adjustable z axis by zig1100
thingiverse
neje master 1 or 2 adjustable x-z axis.
thingiverse
free
![NEJE Laser modification by Ketttensaegentechnik](/t/8036731.jpg)
NEJE Laser modification by Ketttensaegentechnik
...ave a new axis concept. with the angle you can fixed the laser on the machine table. with this setup you have more opportunities.
thingiverse
free
![neje qwik release for neje module slide by dav88](/t/8240014.jpg)
neje qwik release for neje module slide by dav88
...r on back with holes facing horizontal and the pin flat side down for no supports.
ps. it is in inches. scale up 2540% to get mm.
thingiverse
free
![NEJE Laser Wall Mount by bobenhimen](/t/8105703.jpg)
NEJE Laser Wall Mount by bobenhimen
...t by bobenhimen
thingiverse
wanted to clear up some desk space, made a wall mount tab for the neje.
no supports or brim needed.
thingiverse
free
![NEJE Laser Focus Knob by buckeyes1997](/t/5041137.jpg)
NEJE Laser Focus Knob by buckeyes1997
...ingiverse
this is a larger outter focus knob for the neje laser head. it fits snug over the existing laser knob for the optics.
thingiverse
free
![Neje Leg Holder by xHubbyx](/t/8504153.jpg)
Neje Leg Holder by xHubbyx
...neje leg holder by xhubbyx
thingiverse
simple leg holder to help keep it in place and square..
Thumbscrew
thingiverse
free
![Thumbscrews by shadowtrk](/t/8720794.jpg)
Thumbscrews by shadowtrk
...thumbscrews by shadowtrk
thingiverse
thumbscrews
thingiverse
free
![Thumbscrew adapter by imaicom](/t/8157517.jpg)
Thumbscrew adapter by imaicom
...thumbscrew adapter by imaicom
thingiverse
thumbscrew adapter m3
thingiverse
free
![M8 ThumbScrew by SAW_Minion](/t/8522908.jpg)
M8 ThumbScrew by SAW_Minion
...m8 thumbscrew by saw_minion
thingiverse
a small thumbscrew / wingnut
thingiverse
free
![Thumbscrew M3 by darthandred](/t/8037423.jpg)
Thumbscrew M3 by darthandred
...thumbscrew m3 by darthandred
thingiverse
thumbscrew m3 . made in solidedge.
thingiverse
free
![M4 Thumbscrew by whisperoftheshot](/t/9054234.jpg)
M4 Thumbscrew by whisperoftheshot
...m4 thumbscrew by whisperoftheshot
thingiverse
m4 thumbscrews to help bed leveling on a reprap.
thingiverse
free
![M4 Thumbscrew](/t/4974169.jpg)
M4 Thumbscrew
...these thumbscrews can be fastened and loosen by hand.
just push them on the original m4 nut, maybe a bit of glue to prevent loss.
thingiverse
free
![sma thumbscrew by Renegat3](/t/8296316.jpg)
sma thumbscrew by Renegat3
...sma thumbscrew by renegat3
thingiverse
thumbscrew for easy and quick assembly of your fpv equipment
thingiverse
free
![m5 thumbscrew by ReflectorBB](/t/8590047.jpg)
m5 thumbscrew by ReflectorBB
...m5 thumbscrew by reflectorbb
thingiverse
long m5 thumbscrew, remixed from mrstanlez design
thingiverse
free
![GoPro Thumbscrew by farfignewt](/t/9022982.jpg)
GoPro Thumbscrew by farfignewt
...by farfignewt
thingiverse
this is a copy of the thumbscrew that comes with the gopro hero 3 silver. this uses a 5mm x 45mm bolt.
thingiverse
free
![M3 Thumbscrew by Kean](/t/9052222.jpg)
M3 Thumbscrew by Kean
...crew by kean
thingiverse
a very basic "thumbscrew" to go on the head of a m3 machine screw. 10mm diameter x 5mm high.
Guard
thingiverse
free
![guard](/t/4870491.jpg)
guard
...guard
thingiverse
toy guard.
thingiverse
free
![Tentacle guard fan guard by yzorg](/t/8805934.jpg)
Tentacle guard fan guard by yzorg
...tentacle guard fan guard by yzorg
thingiverse
;)
thingiverse
free
![guard who guards the guard (or angelic guard)](/t/4769490.jpg)
guard who guards the guard (or angelic guard)
...ing for helping me out/ encouraging me
if i forgot to include your thing in the remix section, just message me
enjoy >^..^<
thingiverse
free
![NASA Switch Guard - Half guard by Longwing](/t/8354863.jpg)
NASA Switch Guard - Half guard by Longwing
... the guard removed. these are used on the shuttle if you look closely. some of the switch arrays end in one of these half-guards.
thingiverse
free
![Dirt Guard (grit guard) by justingray](/t/8314820.jpg)
Dirt Guard (grit guard) by justingray
... needed a grit guard to get the grit off a wash-mitt. this one is designed to be 3d printed, using as little material as possible
thingiverse
free
![Guard by Moclamady91](/t/8264960.jpg)
Guard by Moclamady91
...guard by moclamady91
thingiverse
i fused all the pieces of the guard to make the model easier to print and assemble
thingiverse
free
![helmet (guard) by jappieb](/t/8274833.jpg)
helmet (guard) by jappieb
...helmet (guard) by jappieb
thingiverse
helmet (guard)
thingiverse
free
![wraith guard by jimjimjimmyjim](/t/5025549.jpg)
wraith guard by jimjimjimmyjim
...wraith guard by jimjimjimmyjim
thingiverse
wraith guard
thingiverse
free
![Head(less)Guard](/t/4864792.jpg)
Head(less)Guard
...head(less)guard
thingiverse
head(less)guard
thingiverse
free
![Crawler Guard Axial](/t/4893537.jpg)
Crawler Guard Axial
...crawler guard axial
thingiverse
crawler guard axial
Laser
thingiverse
free
![Laser](/t/4792736.jpg)
Laser
...laser
thingiverse
first version of a bracket with a clamp to hold a laser.
thingiverse
free
![3D Laser Scanner 9mm laser, 12mm laser by Taurus82](/t/8858975.jpg)
3D Laser Scanner 9mm laser, 12mm laser by Taurus82
...3d laser scanner 9mm laser, 12mm laser by taurus82
thingiverse
happy printing!
happy scanning!
thingiverse
free
!["lasers" - art deco laser bits by jimjimjimmyjim](/t/8170704.jpg)
"lasers" - art deco laser bits by jimjimjimmyjim
..."lasers" - art deco laser bits by jimjimjimmyjim
thingiverse
"lasers" - art deco laser bits
thingiverse
free
![laser gun](/t/4907656.jpg)
laser gun
...laser gun
thingiverse
basic laser gun model
thingiverse
free
![K40 Laser Cut - GuideLine Laser by VINCE27M](/t/8620852.jpg)
K40 Laser Cut - GuideLine Laser by VINCE27M
...deline laser by vince27m
thingiverse
support modifié pour intégrer des lasers pour pointer l'emplacement de la gravure laser
thingiverse
free
![Laser module mount for pocket laser engraver by Ewooks](/t/8919207.jpg)
Laser module mount for pocket laser engraver by Ewooks
...laser module mount for pocket laser engraver by ewooks
thingiverse
laser module mount for my pocket laser engraver
thingiverse
free
![Laser level by dental2016](/t/8281436.jpg)
Laser level by dental2016
...laser level by dental2016
thingiverse
laser level with 12mm diameter red laser
thingiverse
free
![NEJE Laser Engraver - Laser Mount Extender by brettcarroll](/t/8270584.jpg)
NEJE Laser Engraver - Laser Mount Extender by brettcarroll
...e placed closer to the bed.
designed for use on the neje dk 5 laser engraver, but should work on all neje laser engraver/cutters.
thingiverse
free
![Eleksmaker Laser BackPlate](/t/4737685.jpg)
Eleksmaker Laser BackPlate
... have a different laser fitted on this but dose work for eleksmaker laser as well. this is so you can move laser up and down easy
thingiverse
free
![Laser Mount for 33mm Square Laser by TypicalTitan](/t/8675324.jpg)
Laser Mount for 33mm Square Laser by TypicalTitan
...t for 33mm square laser by typicaltitan
thingiverse
modular holder for laser head for diy cnc 3 axis engraver machine on amazon.