Thingiverse
Neje 40W Laser Module Air Assist by pointybeard
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is my take on an air assist for the Neje 40W laser module.
There are 2 parts: The adapter and the nozzle. The nozzle is a press-fit into the base of the adapter.
The nozzle will sit at the right height for the focus of the laser (the 40W module is a fixed focus laser).
To install, remove the acrylic face plate from the laser module and replace with the adapter. Attach 6mm ID hose to the hose barb connector on the side and use a couple of zip-ties to secure. Insert the nozzle from the bottom. It is a resistance fit, however, if its loose, try adding a layer of tape around or just glue in place (make sure the nozzle is rotated properly so its pointing at the laser beam).
UPDATE 4/4/2021
I have uploaded a version to suit 4mm ID hose. Note I have not tested this.
There are 2 parts: The adapter and the nozzle. The nozzle is a press-fit into the base of the adapter.
The nozzle will sit at the right height for the focus of the laser (the 40W module is a fixed focus laser).
To install, remove the acrylic face plate from the laser module and replace with the adapter. Attach 6mm ID hose to the hose barb connector on the side and use a couple of zip-ties to secure. Insert the nozzle from the bottom. It is a resistance fit, however, if its loose, try adding a layer of tape around or just glue in place (make sure the nozzle is rotated properly so its pointing at the laser beam).
UPDATE 4/4/2021
I have uploaded a version to suit 4mm ID hose. Note I have not tested this.
Similar models
thingiverse
free
NEJE 30w 40w Laser module air assist nozzle by Domi1988
...ule. for 4/6mm tube. focus the laser to 8mm under the module and install the air assist. then only focus with height adjustment.
thingiverse
free
NEJE 40watt Air assist nozzle by gerhardbooysen
... flat so it prints easier.
i have not tested it on a actual workpiece - but it does fit well and does not interfere with the beam
thingiverse
free
neje 30w 40w focus wheel extension and air assist by Petea4
...neje 30w 40w focus wheel extension and air assist by petea4
thingiverse
neje 30w 40w focus wheel extension and air assist
thingiverse
free
Neje 30/40w laser modul air assist holder by tintek
...it's designed for 1mm needle and the angle can be adjusted.
needle just plug to compressed air about 1-1,5bar work just fine.
thingiverse
free
Laser W40 Air assist by Turbostar
...t by turbostar
thingiverse
this is for air assistance on the 40w china laser.
the fitting for the hose is ø5 inner and ø7 outer.
thingiverse
free
Air assist nozzle upgrade for 40w laser by Tomodachi1
...hardwood easily without burning your wood.
printed with 3 layer walls and 0.3mm thickness
print time: 1h
filament: 5161mm (0.73$)
thingiverse
free
Air Assist Nozzle (33x33 blue diode laser)
... the other end of the hose plugs into my existing blower / cpap hose setup. link here:
https://www.thingiverse.com/thing:4014956
grabcad
free
Neje Air Assist Nozzles
...ozzles
grabcad
a variety of air assist nozzles for the neje 40 watt laser. made mine out of petg, but you could use pla as well
thingiverse
free
Air Assist Nozzle for 40w Laser by pjbutler
...freight airbrush kit (http://goo.gl/rz6dru).
it fits pretty snugly over the lens cover, but i added a zip-tie for added security.
thingiverse
free
Neje 30w Air assist 3/16th inch ID hose by Thorn11166
... thorn11166
thingiverse
remixed the 8mm version to allow a 3/16th id hose as that is what i had on hand going from the air pump.
Pointybeard
thingiverse
free
Ryobi RTR400-S Template for Drawer Handles by pointybeard
...wer handles by pointybeard
thingiverse
remodelled the makita base plate provided by chapel to suit a ryobi rtr400-s trim router.
thingiverse
free
Vertical Laptop Stand (25mm Width) by pointybeard
...a laptop up to 25mm wide. everything else is the same. this does make the footprint bigger and only just fits on ender 3 v2 bed.
thingiverse
free
Adapter Plate for Ryobi RTR400-S Trim Router by pointybeard
...er. print this either as a replacement for an existing one (stl) or to use to build upon for various jigs and attachments (step).
thingiverse
free
Paper Towel Holder by pointybeard
...ty by zefram_cochrane (link on the sidebar).
optionally, add a dab of super glue or epoxy to notches where the two sections meet.
thingiverse
free
Neje Master 2s Max Adjustable Z-Slide Mounting Plate by pointybeard
...out 35mm in the y and approximately 20mm in the x.
(more photos and better instructions to come if there is interest in this mod)
thingiverse
free
Single Motor, Dual Z-Axis, Mount & Spacer for CR-10/Ender 3 by pointybeard
...eed to drill out holes.
this part does not need any support. print with 40% infill. the model has been pre-oriented for printing.
thingiverse
free
Walmart Mainstays Parsons Enclosure Ender 3 by XYZebruh
...source: btt tft35-e3 v3.0 - free standing case by pointybeard on thingiverse: https://www.thingiverse.com/thing:4514252 filament guide: something i made awhile...
Neje
thingiverse
free
Neje Master Risers
...neje master risers
thingiverse
this is risers for the neje master. there is a left and right part.
the neje master lifted 5cm
thingiverse
free
Ortur NEJE Adapter by Zimmant
... carriage.
"neje back plate v1.stl" is a quick adapter plate that is untested.
both use a captive design for m3 nuts.
thingiverse
free
NEJE Laser Mount by buckeyes1997
...ap neje 7w laser. the mount has 4 holes for the m3 screws to the laser body and 3 holes for mounting on a frame or machine base.
thingiverse
free
Neje / KkMoon Holder for Laser
...
i destroyed my laser engraving holder of my neje master / kkmoon, so i designed a new one in fusion 360.
100% infill, enjoy it!
thingiverse
free
Neje master Adjustable Z axis by Zig1100
...neje master adjustable z axis by zig1100
thingiverse
neje master 1 or 2 adjustable x-z axis.
thingiverse
free
NEJE Laser modification by Ketttensaegentechnik
...ave a new axis concept. with the angle you can fixed the laser on the machine table. with this setup you have more opportunities.
thingiverse
free
neje qwik release for neje module slide by dav88
...r on back with holes facing horizontal and the pin flat side down for no supports.
ps. it is in inches. scale up 2540% to get mm.
thingiverse
free
NEJE Laser Wall Mount by bobenhimen
...t by bobenhimen
thingiverse
wanted to clear up some desk space, made a wall mount tab for the neje.
no supports or brim needed.
thingiverse
free
NEJE Laser Focus Knob by buckeyes1997
...ingiverse
this is a larger outter focus knob for the neje laser head. it fits snug over the existing laser knob for the optics.
thingiverse
free
Neje Leg Holder by xHubbyx
...neje leg holder by xhubbyx
thingiverse
simple leg holder to help keep it in place and square..
40W
3ddd
$1
люстра LuceSolara 5029/8 E14 40W
...ь:e14
мощность:max 40w
габариты:ø800*в1120мм
материал:металл, стекло
сайт производителя http://www.lucesolara.com/5029/8_e14*40w
3ddd
$1
люстра LuceSolara 5026/12 E14*40W
...ть:max 40w
ламп:12 шт
габариты:ø955*в1250мм
материал:металл, стекло
сайт производителя http://www.lucesolara.com/5026/12_e14*40w
3ddd
free
бра LuceSolara 5026-2A E14 40W
...ax 40w
ламп:2 шт
габариты:ш500*г237*в430мм
материал:металл, стекло
сайт производителя: http://www.lucesolara.com/5026/2a_e14*40w
3ddd
$1
40W initio TRACK LIGHT
...нь
область применения
бутики и супермаркеты
выставочные комплекты
кафе и рестораны
общественные интерьеры
офисы и бизнес-центры
3ddd
$1
Esto
...esto , чехия производитель esto(чехия)люстра (59825-9)d790,h210, 9*40w; бра (59827-3)h400 3*40w ...
3ddd
free
Luce Solara 2010
...материал: металл цвета: золото, латунь,хром цоколь: e14 мощность: макс. 40w1 габариты, мм: d160/h1200 и...
3ddd
free
ARGENTO
...3ddd argento люстра argento 712214р 21 x e14 max 40w ...
3ddd
$1
Spirale Veronese
...диаметр: 40 см лампы 220v 6 / е14 х 40w (макс) 110v 6 / е12 х 40w...
3ddd
free
Точечные светильники
...точечные светильники: 369802 nt12 220 хром встраиваемый ip20 g9 40w 220v nord 369809 nt12 220 хром встраиваемый ip20 g9...
3ddd
$1
Donolux Giardino Di Rose S110153/3
...donolux giardino di rose s110153/3 3ddd donolux 3хе14 40w d32xh36, декор - керамические...
Assist
turbosquid
$120
Robot Assistant
...id
royalty free 3d model robot assistant for download as max on turbosquid: 3d models for games, architecture, videos. (1381212)
3d_export
$5
painting assistant
...painting assistant
3dexport
draw samples
3d_export
$5
assistive cane
...assistive cane
3dexport
aristocratic cane for characters
3d_export
$10
Assist bike 3D Model
...assist bike 3d model
3dexport
assist bike
assist bike 3d model modelix 59218 3dexport
turbosquid
$69
computer assistant character
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Robot Assistant
...d
royalty free 3d model 3d robot human for download as blend on turbosquid: 3d models for games, architecture, videos. (1599434)
turbosquid
$30
Galaxy Assistant's Stool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
Prototype version of the robot assistant
...ersion of the robot assistant, designed to help a person in a variety of tasks, both in helping in the garden and in armed escort
turbosquid
$69
Droid Assistant
... robot guard for download as blend, dae, fbx, obj, stl, and x on turbosquid: 3d models for games, architecture, videos. (1624852)
turbosquid
free
Free Realistic Grass Assistant
...3d model free realistic grass assistant for download as blend on turbosquid: 3d models for games, architecture, videos. (1454100)
Laser
3d_export
$5
laser
...laser
3dexport
a 3d laser
3d_export
free
cnc 3dp laser nozzle for 2w laser opt lasers
...logy that gave birth to cutting and engraving laser heads this laser nozzle was designed for, read the article in the link below:
3d_export
free
cnc laser mount opt lasers
...eive the engraving and cutting laser heads this cnc machine laser mount was designed for, read the article on the following page:
turbosquid
$20
Laser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Laser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Laser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
laser sword
...laser sword
3dexport
it is a blue laser sword with a metal frame
3d_ocean
$19
Laser Turret
...be used in any sf type of game, especially in tower defense games. - laser turret: 3025 polygons - props: 270 polygons - textu...
3d_export
free
workbee cnc laser mount for opt lasers
...the specifications of engraving and cutting laser heads this mount was designed for, please take a look at the following website:
3d_export
free
shapeoko cnc laser mount for opt lasers
...ind out the opportunities that adding a cutting and engraving laser head to your cnc can bring, take a look at the website below:
Module
turbosquid
$4
Module
...
turbosquid
royalty free 3d model module for download as max on turbosquid: 3d models for games, architecture, videos. (1259603)
3d_export
free
Martian module
...martian module
3dexport
martian module objects 18 textures are missing
design_connected
$39
Kennedee Moduls
...kennedee moduls
designconnected
kennedee moduls computer generated 3d model. designed by massaud, jean-marie.
design_connected
$39
Sayonara Moduls
...sayonara moduls
designconnected
bbb emmebonacina sayonara moduls computer generated 3d model. designed by decursu, giorgio.
design_connected
$27
Togo Moduls
...togo moduls
designconnected
ligne roset togo moduls computer generated 3d model. designed by ducaroy, michel.
design_connected
$34
Nuvola Moduls
...nuvola moduls
designconnected
bonaldo nuvola moduls 2-seater computer generated 3d model. designed by giuseppe viganò.
3d_export
free
Hibernation module
...hibernation module
3dexport
design_connected
$27
Sabi moduls
...sabi moduls
designconnected
paola lenti sabi moduls 2-seater computer generated 3d model. designed by francesco rota.
3d_export
$50
pls concrete module
...pls concrete module
3dexport
pls concrete module<br>pls with concrete mobile mixer module m5
turbosquid
free
Hibernation module
...squid
free 3d model hibernation module for download as blend on turbosquid: 3d models for games, architecture, videos. (1667696)
Air
3ddd
$1
Calligaris air
...calligaris air
3ddd
air , calligaris
cтул calligaris air
3ddd
$1
Air freshener
...air freshener
3ddd
air freshener , освежитель
air freshener
design_connected
$16
Air
...air
designconnected
flexform air lounge chairs computer generated 3d model. designed by antonio citterio.
turbosquid
$250
Heat pump air air
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
air
...air
3dexport
3ddd
$1
Кухня AIR
...кухня air
3ddd
air , мария
кухня air фабрики "мария"
3ddd
$1
Лампа AIR
...лампа air
3ddd
boconcept , air
настольная лампа air, boconcept. в50½xø32см
3d_export
$40
air deflector
...air deflector
3dexport
air deflector
3d_export
$15
air purifier
...air purifier
3dexport
air purifier
3d_export
$5
macbook air
...macbook air
3dexport
macbook air