Thingiverse
![Neje 40W Laser Module Air Assist by pointybeard](/previews/8230970.jpg)
Neje 40W Laser Module Air Assist by pointybeard
by Thingiverse
Last crawled date: 3 years, 2 months ago
This is my take on an air assist for the Neje 40W laser module.
There are 2 parts: The adapter and the nozzle. The nozzle is a press-fit into the base of the adapter.
The nozzle will sit at the right height for the focus of the laser (the 40W module is a fixed focus laser).
To install, remove the acrylic face plate from the laser module and replace with the adapter. Attach 6mm ID hose to the hose barb connector on the side and use a couple of zip-ties to secure. Insert the nozzle from the bottom. It is a resistance fit, however, if its loose, try adding a layer of tape around or just glue in place (make sure the nozzle is rotated properly so its pointing at the laser beam).
UPDATE 4/4/2021
I have uploaded a version to suit 4mm ID hose. Note I have not tested this.
There are 2 parts: The adapter and the nozzle. The nozzle is a press-fit into the base of the adapter.
The nozzle will sit at the right height for the focus of the laser (the 40W module is a fixed focus laser).
To install, remove the acrylic face plate from the laser module and replace with the adapter. Attach 6mm ID hose to the hose barb connector on the side and use a couple of zip-ties to secure. Insert the nozzle from the bottom. It is a resistance fit, however, if its loose, try adding a layer of tape around or just glue in place (make sure the nozzle is rotated properly so its pointing at the laser beam).
UPDATE 4/4/2021
I have uploaded a version to suit 4mm ID hose. Note I have not tested this.
Similar models
thingiverse
free
![NEJE 30w 40w Laser module air assist nozzle by Domi1988](/t/8048838.jpg)
NEJE 30w 40w Laser module air assist nozzle by Domi1988
...ule. for 4/6mm tube. focus the laser to 8mm under the module and install the air assist. then only focus with height adjustment.
thingiverse
free
![NEJE 40watt Air assist nozzle by gerhardbooysen](/t/10237213.jpg)
NEJE 40watt Air assist nozzle by gerhardbooysen
... flat so it prints easier.
i have not tested it on a actual workpiece - but it does fit well and does not interfere with the beam
thingiverse
free
![neje 30w 40w focus wheel extension and air assist by Petea4](/t/9692111.jpg)
neje 30w 40w focus wheel extension and air assist by Petea4
...neje 30w 40w focus wheel extension and air assist by petea4
thingiverse
neje 30w 40w focus wheel extension and air assist
thingiverse
free
![Neje 30/40w laser modul air assist holder by tintek](/t/9253259.jpg)
Neje 30/40w laser modul air assist holder by tintek
...it's designed for 1mm needle and the angle can be adjusted.
needle just plug to compressed air about 1-1,5bar work just fine.
thingiverse
free
![Laser W40 Air assist by Turbostar](/t/8719997.jpg)
Laser W40 Air assist by Turbostar
...t by turbostar
thingiverse
this is for air assistance on the 40w china laser.
the fitting for the hose is ø5 inner and ø7 outer.
thingiverse
free
![Air assist nozzle upgrade for 40w laser by Tomodachi1](/t/8713429.jpg)
Air assist nozzle upgrade for 40w laser by Tomodachi1
...hardwood easily without burning your wood.
printed with 3 layer walls and 0.3mm thickness
print time: 1h
filament: 5161mm (0.73$)
thingiverse
free
![Air Assist Nozzle (33x33 blue diode laser)](/t/4779696.jpg)
Air Assist Nozzle (33x33 blue diode laser)
... the other end of the hose plugs into my existing blower / cpap hose setup. link here:
https://www.thingiverse.com/thing:4014956
thingiverse
free
![Air Assist Nozzle for 40w Laser by pjbutler](/t/8878703.jpg)
Air Assist Nozzle for 40w Laser by pjbutler
...freight airbrush kit (http://goo.gl/rz6dru).
it fits pretty snugly over the lens cover, but i added a zip-tie for added security.
thingiverse
free
![Neje 30w Air assist 3/16th inch ID hose by Thorn11166](/t/8375650.jpg)
Neje 30w Air assist 3/16th inch ID hose by Thorn11166
... thorn11166
thingiverse
remixed the 8mm version to allow a 3/16th id hose as that is what i had on hand going from the air pump.
thingiverse
free
![40w China Laser air assist by myles504](/t/8857843.jpg)
40w China Laser air assist by myles504
...ssist for 40w china laser.
friction fit but can use m3 bolt to hold in place
base of nozzle set just above standard focal length.
Pointybeard
thingiverse
free
![Ryobi RTR400-S Template for Drawer Handles by pointybeard](/t/8158662.jpg)
Ryobi RTR400-S Template for Drawer Handles by pointybeard
...wer handles by pointybeard
thingiverse
remodelled the makita base plate provided by chapel to suit a ryobi rtr400-s trim router.
thingiverse
free
![Vertical Laptop Stand (25mm Width) by pointybeard](/t/8230915.jpg)
Vertical Laptop Stand (25mm Width) by pointybeard
...a laptop up to 25mm wide. everything else is the same. this does make the footprint bigger and only just fits on ender 3 v2 bed.
thingiverse
free
![Adapter Plate for Ryobi RTR400-S Trim Router by pointybeard](/t/8158657.jpg)
Adapter Plate for Ryobi RTR400-S Trim Router by pointybeard
...er. print this either as a replacement for an existing one (stl) or to use to build upon for various jigs and attachments (step).
thingiverse
free
![Paper Towel Holder by pointybeard](/t/8158659.jpg)
Paper Towel Holder by pointybeard
...ty by zefram_cochrane (link on the sidebar).
optionally, add a dab of super glue or epoxy to notches where the two sections meet.
thingiverse
free
![Neje Master 2s Max Adjustable Z-Slide Mounting Plate by pointybeard](/t/8230943.jpg)
Neje Master 2s Max Adjustable Z-Slide Mounting Plate by pointybeard
...out 35mm in the y and approximately 20mm in the x.
(more photos and better instructions to come if there is interest in this mod)
thingiverse
free
![Single Motor, Dual Z-Axis, Mount & Spacer for CR-10/Ender 3 by pointybeard](/t/8199580.jpg)
Single Motor, Dual Z-Axis, Mount & Spacer for CR-10/Ender 3 by pointybeard
...eed to drill out holes.
this part does not need any support. print with 40% infill. the model has been pre-oriented for printing.
thingiverse
free
![Walmart Mainstays Parsons Enclosure Ender 3 by XYZebruh](/t/9686120.jpg)
Walmart Mainstays Parsons Enclosure Ender 3 by XYZebruh
...source: btt tft35-e3 v3.0 - free standing case by pointybeard on thingiverse: https://www.thingiverse.com/thing:4514252 filament guide: something i made awhile...
Neje
thingiverse
free
![Neje Master Risers](/t/4897287.jpg)
Neje Master Risers
...neje master risers
thingiverse
this is risers for the neje master. there is a left and right part.
the neje master lifted 5cm
thingiverse
free
![Ortur NEJE Adapter by Zimmant](/t/8164193.jpg)
Ortur NEJE Adapter by Zimmant
... carriage.
"neje back plate v1.stl" is a quick adapter plate that is untested.
both use a captive design for m3 nuts.
thingiverse
free
![NEJE Laser Mount by buckeyes1997](/t/5031554.jpg)
NEJE Laser Mount by buckeyes1997
...ap neje 7w laser. the mount has 4 holes for the m3 screws to the laser body and 3 holes for mounting on a frame or machine base.
thingiverse
free
![Neje / KkMoon Holder for Laser](/t/4788302.jpg)
Neje / KkMoon Holder for Laser
...
i destroyed my laser engraving holder of my neje master / kkmoon, so i designed a new one in fusion 360.
100% infill, enjoy it!
thingiverse
free
![Neje master Adjustable Z axis by Zig1100](/t/8086896.jpg)
Neje master Adjustable Z axis by Zig1100
...neje master adjustable z axis by zig1100
thingiverse
neje master 1 or 2 adjustable x-z axis.
thingiverse
free
![NEJE Laser modification by Ketttensaegentechnik](/t/8036731.jpg)
NEJE Laser modification by Ketttensaegentechnik
...ave a new axis concept. with the angle you can fixed the laser on the machine table. with this setup you have more opportunities.
thingiverse
free
![neje qwik release for neje module slide by dav88](/t/8240014.jpg)
neje qwik release for neje module slide by dav88
...r on back with holes facing horizontal and the pin flat side down for no supports.
ps. it is in inches. scale up 2540% to get mm.
thingiverse
free
![NEJE Laser Wall Mount by bobenhimen](/t/8105703.jpg)
NEJE Laser Wall Mount by bobenhimen
...t by bobenhimen
thingiverse
wanted to clear up some desk space, made a wall mount tab for the neje.
no supports or brim needed.
thingiverse
free
![NEJE Laser Focus Knob by buckeyes1997](/t/5041137.jpg)
NEJE Laser Focus Knob by buckeyes1997
...ingiverse
this is a larger outter focus knob for the neje laser head. it fits snug over the existing laser knob for the optics.
thingiverse
free
![Neje Leg Holder by xHubbyx](/t/8504153.jpg)
Neje Leg Holder by xHubbyx
...neje leg holder by xhubbyx
thingiverse
simple leg holder to help keep it in place and square..
40W
thingiverse
free
![Anker PowerPort 40W Holder by Edd77](/t/8659096.jpg)
Anker PowerPort 40W Holder by Edd77
...anker powerport 40w holder by edd77
thingiverse
anker powerport 40w holder
thingiverse
free
![Macbook 40W Charger Wrap by MechanicalGoose](/t/8950757.jpg)
Macbook 40W Charger Wrap by MechanicalGoose
...macbook 40w charger wrap by mechanicalgoose
thingiverse
this is a cord wrap for a 40w macbook charger.
thingiverse
free
![CO2 40W laser tube clamp by b_r_a_v_e](/t/8502376.jpg)
CO2 40W laser tube clamp by b_r_a_v_e
...co2 40w laser tube clamp by b_r_a_v_e
thingiverse
co2 40w laser tube clamp for chinese 40w co2 laser engraver/cutter
thingiverse
free
![vape stand for istick 40w by 3dben3d](/t/8860954.jpg)
vape stand for istick 40w by 3dben3d
...k 40w by 3dben3d
thingiverse
vape organiser for the istick 40w and some extra tanks. sizes of opening are on the fourth picture.
thingiverse
free
![Eleaf Istick 40w happy holder by mordr3d](/t/8710618.jpg)
Eleaf Istick 40w happy holder by mordr3d
...eleaf istick 40w happy holder by mordr3d
thingiverse
table happy holder for the eleaf istick 40w
thingiverse
free
![iStick 40W TC Cup Holder Insert by jneilliii](/t/8868643.jpg)
iStick 40W TC Cup Holder Insert by jneilliii
...istick 40w tc cup holder insert by jneilliii
thingiverse
updated version for the eleaf istick 40w tc battery mod.
thingiverse
free
![NEJE MASTER 2 adaptor for 40W laser upgrade by weppyk](/t/8142283.jpg)
NEJE MASTER 2 adaptor for 40W laser upgrade by weppyk
...neje master 2 adaptor for 40w laser upgrade by weppyk
thingiverse
this is adapter for neje master 2 40w head.
thingiverse
free
![RAVPower charger 4 usb ports 40W holder by mrghast97](/t/8109276.jpg)
RAVPower charger 4 usb ports 40W holder by mrghast97
...ravpower charger 4 usb ports 40w holder by mrghast97
thingiverse
ravpower charger 4 usb ports 40w holder
thingiverse
free
![40w China Laser air assist by myles504](/t/8857843.jpg)
40w China Laser air assist by myles504
...ssist for 40w china laser.
friction fit but can use m3 bolt to hold in place
base of nozzle set just above standard focal length.
thingiverse
free
![neje 30w 40w focus wheel extension and air assist by Petea4](/t/9692111.jpg)
neje 30w 40w focus wheel extension and air assist by Petea4
...neje 30w 40w focus wheel extension and air assist by petea4
thingiverse
neje 30w 40w focus wheel extension and air assist
Assist
thingiverse
free
![assistant for drilling](/t/4977322.jpg)
assistant for drilling
...assistant for drilling
thingiverse
this assistant needs for drilling coaxial holes in wood
thingiverse
free
![mek assistant - orks](/t/4982318.jpg)
mek assistant - orks
...mek assistant - orks
thingiverse
mek assistant
thingiverse
free
![Magazine Assistant by blasterforgePH](/t/8797549.jpg)
Magazine Assistant by blasterforgePH
...magazine assistant by blasterforgeph
thingiverse
nerf magazine assistant for stryfe. enjoy hassle-free reloading
thingiverse
free
![Roll-off assistance by MV1985](/t/8757505.jpg)
Roll-off assistance by MV1985
...roll-off assistance by mv1985
thingiverse
roll-off assistance
thingiverse
free
![Dab Assistant by BigEagleFPV](/t/8195419.jpg)
Dab Assistant by BigEagleFPV
...ant is a great addition to any smokers life. it will hold the following:
dabber
concentrates
q-tips
isopropyl alcohol
trash
joint
thingiverse
free
![EleksMaker Air Assist](/t/4745568.jpg)
EleksMaker Air Assist
...iverse
this is a air assist for eleksmaker laser. i have tested on my own laser as you can see from the photos so you no it fits
thingiverse
free
![case home assistant by cveenman](/t/8660616.jpg)
case home assistant by cveenman
...case home assistant by cveenman
thingiverse
case for home assistant pi incl zwave usb
thingiverse
free
![LaserSaur Air Assist by Jamie](/t/9062158.jpg)
LaserSaur Air Assist by Jamie
...lasersaur air assist by jamie
thingiverse
this is my first cut at an air-assist for the lasersaur laser cutter.
thingiverse
free
![Air assist by claudeh](/t/8162540.jpg)
Air assist by claudeh
...air assist by claudeh
thingiverse
air assit cnc laser
thingiverse
free
![Knife Assistant by ThePlanetMike](/t/9059976.jpg)
Knife Assistant by ThePlanetMike
...trollably vertically aligned for nice straight slices.
want me to design a 3d printable assistive technology for you? contact me!
Module
thingiverse
free
![Modulator 2008B](/t/4674412.jpg)
Modulator 2008B
...modulator 2008b
thingiverse
this is a federal signal modulator 2008b. this is electronic.
thingiverse
free
![Modules by Spillusion](/t/9680861.jpg)
Modules by Spillusion
...modules by spillusion
thingiverse
thingiverse
free
![Openstructures module by randa_prod](/t/8882280.jpg)
Openstructures module by randa_prod
...openstructures module by randa_prod
thingiverse
basic module 4cmx4cm
thingiverse
free
![OLED Module by Lofttomte](/t/8574325.jpg)
OLED Module by Lofttomte
...oled module by lofttomte
thingiverse
oled module 0.96"
thingiverse
free
![Module by narinekaa](/t/8639565.jpg)
Module by narinekaa
...module by narinekaa
thingiverse
heihde
thingiverse
free
![Skyzone Module Adapter](/t/4875908.jpg)
Skyzone Module Adapter
...later for the receiver, the module take power from the battery plug, with avin mode, the goggles can use rapidfire or tbs fusion.
thingiverse
free
![River Module by Troybenji](/t/8059767.jpg)
River Module by Troybenji
...river module by troybenji
thingiverse
a simple river module i created in tinkercad
thingiverse
free
![Stand Module by Willermax](/t/9017305.jpg)
Stand Module by Willermax
...stand module by willermax
thingiverse
this is a module that i made for my filament stand.
thingiverse
free
![module bay for TBS fusion module aomway v1 mod by Dadog92](/t/8166599.jpg)
module bay for TBS fusion module aomway v1 mod by Dadog92
...module bay for tbs fusion module aomway v1 mod by dadog92
thingiverse
module bay for tbs fusion module aomway v1 mod
thingiverse
free
![Laser Module crosshair eye](/t/4865275.jpg)
Laser Module crosshair eye
...laser module crosshair eye
thingiverse
laser module holder for a 9mm laser module.
Laser
thingiverse
free
![Laser](/t/4792736.jpg)
Laser
...laser
thingiverse
first version of a bracket with a clamp to hold a laser.
thingiverse
free
![3D Laser Scanner 9mm laser, 12mm laser by Taurus82](/t/8858975.jpg)
3D Laser Scanner 9mm laser, 12mm laser by Taurus82
...3d laser scanner 9mm laser, 12mm laser by taurus82
thingiverse
happy printing!
happy scanning!
thingiverse
free
!["lasers" - art deco laser bits by jimjimjimmyjim](/t/8170704.jpg)
"lasers" - art deco laser bits by jimjimjimmyjim
..."lasers" - art deco laser bits by jimjimjimmyjim
thingiverse
"lasers" - art deco laser bits
thingiverse
free
![laser gun](/t/4907656.jpg)
laser gun
...laser gun
thingiverse
basic laser gun model
thingiverse
free
![K40 Laser Cut - GuideLine Laser by VINCE27M](/t/8620852.jpg)
K40 Laser Cut - GuideLine Laser by VINCE27M
...deline laser by vince27m
thingiverse
support modifié pour intégrer des lasers pour pointer l'emplacement de la gravure laser
thingiverse
free
![Laser module mount for pocket laser engraver by Ewooks](/t/8919207.jpg)
Laser module mount for pocket laser engraver by Ewooks
...laser module mount for pocket laser engraver by ewooks
thingiverse
laser module mount for my pocket laser engraver
thingiverse
free
![Laser level by dental2016](/t/8281436.jpg)
Laser level by dental2016
...laser level by dental2016
thingiverse
laser level with 12mm diameter red laser
thingiverse
free
![NEJE Laser Engraver - Laser Mount Extender by brettcarroll](/t/8270584.jpg)
NEJE Laser Engraver - Laser Mount Extender by brettcarroll
...e placed closer to the bed.
designed for use on the neje dk 5 laser engraver, but should work on all neje laser engraver/cutters.
thingiverse
free
![Eleksmaker Laser BackPlate](/t/4737685.jpg)
Eleksmaker Laser BackPlate
... have a different laser fitted on this but dose work for eleksmaker laser as well. this is so you can move laser up and down easy
thingiverse
free
![Laser Mount for 33mm Square Laser by TypicalTitan](/t/8675324.jpg)
Laser Mount for 33mm Square Laser by TypicalTitan
...t for 33mm square laser by typicaltitan
thingiverse
modular holder for laser head for diy cnc 3 axis engraver machine on amazon.
Air
thingiverse
free
![AIR AIR by baylor_yuan](/t/8952056.jpg)
AIR AIR by baylor_yuan
...air air by baylor_yuan
thingiverse
an awesome product made by my friends.they are on kickstarter.(just for learn and study)
thingiverse
free
![Air valve](/t/4972009.jpg)
Air valve
...he air is bleed. but this is enough to regulate the air flow. i use it to adjust the airflow for fluidized bed dyeing (fluidbed).
thingiverse
free
![Air Pistol/Air Gun by layerone](/t/8943453.jpg)
Air Pistol/Air Gun by layerone
... is basicly the same mechanism as air cannon, but less powerfull, and the attck range is only 10 meters.
www.atom3dp.com/en/atom2
thingiverse
free
![air ballons by](/t/8787535.jpg)
air ballons by
...air ballons by
thingiverse
these are air balloons
thingiverse
free
![Air Gun Air Brake by bkgray115](/t/8768593.jpg)
Air Gun Air Brake by bkgray115
...air gun air brake by bkgray115
thingiverse
printed but un-tested as of yet
thingiverse
free
![air to air rocket by Maverick204](/t/8787284.jpg)
air to air rocket by Maverick204
...rts to print
all printed with supports
in this link you can see the corsair in action:https://www.youtube.com/watch?v=rpajlbc9zhq
thingiverse
free
![KDC-10 Air to Air refuel tanker by Emn](/t/9013447.jpg)
KDC-10 Air to Air refuel tanker by Emn
...kdc-10 air to air refuel tanker by emn
thingiverse
kdc-10 air to air refuel tanker
work in progress
thingiverse
free
![Air deflector by JakeCape](/t/9031997.jpg)
Air deflector by JakeCape
...air deflector by jakecape
thingiverse
air deflector for my air dryer.
thingiverse
free
![Air knife (compressed air diffuser) by NeverDun](/t/8946586.jpg)
Air knife (compressed air diffuser) by NeverDun
...amshells around modular coolant/air pipes commonly seen in shops. works really well, and is much quieter than a standard nozzle.
thingiverse
free
![Air conditioner - air block by alchemico](/t/8536765.jpg)
Air conditioner - air block by alchemico
...outube.com/watch?v=vbnfskuqdes
you can throw ice cubes into the water. air condittioner will work much much much more effectively