Nebulon Targetmaster for Ricochet by autobot00

Last crawled date: 2 years, 11 months ago

Nebulon was designed to go with POTP Ricochet but can be used by any transformer that uses a 5mm weapon.
Print one of each piece and mirror the arms and upper and lower leg pieces. Pins are just 1.75mm filament.
To assemble
1.) put crotch into body and put a filament pin through the holes to hold them together.
2.) place gun upper into body and use a piece of filament through the upper back holes. you can pinch one end of the filament to help keep it in place. Make sure the gun piece hole slides easily on the filament. You may need to widen the hole with a tiny nail or something depending on your printer.
3.) pop the ball joints together for the arms and pop them on the body.
4.) pop the upper leg to the lower leg from the back side.
5.) put the foot onto the lower leg (pay attention to front and back) and put a piece of filament through the leg into the foot.
6.) pop on the head and paint.
DONE!