National FS-4600F MSX2 paper holder by Wierzbowsky

Last crawled date: 3 years, 3 months ago

This is the model of the foldeable paper holder for the National FS-4600F MSX2 computer. The model consists of 2 parts - the main body and the bottom cover. Once you have the metal clamp for the holder ready, glue it into the main part and install the cover. The cover's chamfered edge needs to be pushed a little bit under the ledge.
Please use a hardened steel wire to form the clamp. A soft wire will not be doing a good job as the clamp needs to also function as a spring. If your clamp is weak, installing a small rubber band could help to create the necessary tension.
If you want to make a small donation in appreciation of my humble efforts, please use the "Tip designer" button on this page:
https://www.thingiverse.com/Wierzbowsky/designs