Thingiverse
NASx7 by Ren_Dev
by Thingiverse
Last crawled date: 4 years, 7 months ago
Easy NAS: HDD 4x3.5" and 3x2.5".
Support CPU cooler high 60mm.
MB support mini-ITX or mini-DTX.
Front FAN 140mm
Power Pico-PSU
i am use PVC filter film and laser cutunig filter.svg
DN_case.stl and UP_case.stl print From PLA, PAD.stl from TPU other from PETG.
Print infill 20% out layers 3 nozzle 0.4
For assembly, I used a soldering station at 250 degrees with a round tip.
Easy and fast build.
Power button use 6x6x8 Tactile puch button switch.
Support CPU cooler high 60mm.
MB support mini-ITX or mini-DTX.
Front FAN 140mm
Power Pico-PSU
i am use PVC filter film and laser cutunig filter.svg
DN_case.stl and UP_case.stl print From PLA, PAD.stl from TPU other from PETG.
Print infill 20% out layers 3 nozzle 0.4
For assembly, I used a soldering station at 250 degrees with a round tip.
Easy and fast build.
Power button use 6x6x8 Tactile puch button switch.