GrabCAD
![NASA RASSOR BUCKET DRUM](/previews/5618522.jpg)
NASA RASSOR BUCKET DRUM
by GrabCAD
Last crawled date: 2 years ago
Here's my entry for NASA RASSOR Bucket Drum Design Challenge.
Maximum length = 360mm
Maximum diameter = 440mm
Weight = 4.81Kg
Material = Aluminium 6061
Manufacturing type = SLS additive manufacturing using EOS P760 with 86% fill density.
Total volume = 38.04 litres
Volume captured = 29.04 litres
Fill ratio = 76.34%
Time required to fill the drum = 148.5 seconds.
Number of scoops = 3
Scoop dimension = 60x125mm
Designed in Creo parametric 5.0 and simulated in Altair EDEM, ANSYS Workbench.
Whole design development process can be accessed through the pdf documentation available as a downloadable file.
I started to develop the design by first dividing the problem statement into primary and secondary objectives. I developed three different designs to study the parameters such as Fill ratio and Filling rate. After identifying the parameters I started the development of final design which provides the best compromise between all the parameters. In order to do so i took inspiration from Archimedes screw and python digestion system.
The drum is designed using Creo parametric for 3D printing using aluminium 6061 and 86% fill density.
SIMULATION:
Further in order to verify the results a simulation was carried out in EDEM to measure the fill ratio and time required to achieve that fill ratio.
The drum has a fill ratio of about 76% when operated through a definite cycle which is explained in documentation provided in the downloads.
I don't have a workstation PC so in order to reduce computation time, power and memory I decided to keep the Drum stationary at one point and rotate at 35 rpm and the particles were added to a polygon defined as an inlet with unlimited particles(10000 particles/second) and time step was 1 second, the particles possess the same properties as that of sand and gravity was set to 1.62m/sec^2. These steps really helped me to complete the simulation, after that I derived the important parameters from the simulation so as to see the possible result of the drum had it been rotated at 20rpm.
Through this process I calculated that the maximum amount of regolight captured is 29 litres and 76.34% of the total volume. I have also uploaded the video of extraction of regolith in the downloads, so see how the drum achieves a fill ratio of 76.34% and how its works please refer to the documentation provided in the downloads.
Finally for manufacturing purpose I chose SLS additive manufacturing technology using EOS P760 Machine which has a large bed of size 700 × 380 × 580 mm that can easily accommodate the component.
VIDEO LINK: https://drive.google.com/open?id=1nkAUrkJT0UXI0hnzjcHqWGVjpwYYn656
Included in downloads: Design Documentation, Renderings, Regolith extraction simulation video, Step file, STL file.
Maximum length = 360mm
Maximum diameter = 440mm
Weight = 4.81Kg
Material = Aluminium 6061
Manufacturing type = SLS additive manufacturing using EOS P760 with 86% fill density.
Total volume = 38.04 litres
Volume captured = 29.04 litres
Fill ratio = 76.34%
Time required to fill the drum = 148.5 seconds.
Number of scoops = 3
Scoop dimension = 60x125mm
Designed in Creo parametric 5.0 and simulated in Altair EDEM, ANSYS Workbench.
Whole design development process can be accessed through the pdf documentation available as a downloadable file.
I started to develop the design by first dividing the problem statement into primary and secondary objectives. I developed three different designs to study the parameters such as Fill ratio and Filling rate. After identifying the parameters I started the development of final design which provides the best compromise between all the parameters. In order to do so i took inspiration from Archimedes screw and python digestion system.
The drum is designed using Creo parametric for 3D printing using aluminium 6061 and 86% fill density.
SIMULATION:
Further in order to verify the results a simulation was carried out in EDEM to measure the fill ratio and time required to achieve that fill ratio.
The drum has a fill ratio of about 76% when operated through a definite cycle which is explained in documentation provided in the downloads.
I don't have a workstation PC so in order to reduce computation time, power and memory I decided to keep the Drum stationary at one point and rotate at 35 rpm and the particles were added to a polygon defined as an inlet with unlimited particles(10000 particles/second) and time step was 1 second, the particles possess the same properties as that of sand and gravity was set to 1.62m/sec^2. These steps really helped me to complete the simulation, after that I derived the important parameters from the simulation so as to see the possible result of the drum had it been rotated at 20rpm.
Through this process I calculated that the maximum amount of regolight captured is 29 litres and 76.34% of the total volume. I have also uploaded the video of extraction of regolith in the downloads, so see how the drum achieves a fill ratio of 76.34% and how its works please refer to the documentation provided in the downloads.
Finally for manufacturing purpose I chose SLS additive manufacturing technology using EOS P760 Machine which has a large bed of size 700 × 380 × 580 mm that can easily accommodate the component.
VIDEO LINK: https://drive.google.com/open?id=1nkAUrkJT0UXI0hnzjcHqWGVjpwYYn656
Included in downloads: Design Documentation, Renderings, Regolith extraction simulation video, Step file, STL file.
Similar models
grabcad
free
![RASSOR](/t/5622504.jpg)
RASSOR
... (rassor) with major highlight is the excavation blade is a angle of 30 degree. the software used in particle simulation is edem
grabcad
free
![NASA RASSOR Drum Bucket](/t/5626269.jpg)
NASA RASSOR Drum Bucket
...only be estimated to about 65 %.
material: polyether ether petone (peek)
manufacturing: selective laser sintering
mass: ~4.95 kg
grabcad
free
![SimEx Regolith Collector](/t/5622488.jpg)
SimEx Regolith Collector
...res/bucket drum
for more information on the simulation, please feel free to contact us.
we hope you'll enjoy our design! :)
grabcad
free
![EVN Flap Drum](/t/5624978.jpg)
EVN Flap Drum
...epresents an average fill ratio of 70%. 10s is needed to dump the entirety of the contained regolith.
i hope you will apreciate.
grabcad
free
![RASSOR Bucket Drum Design](/t/5621008.jpg)
RASSOR Bucket Drum Design
...0 mm
volume of regolith captured: approximately 19 liters
fill ratio: approximately 70%
materials:
cfrp
5052-h38 aluminium alloy
grabcad
free
![RASSOR Bucket Drum](/t/5746521.jpg)
RASSOR Bucket Drum
...s strength and weldability.
personal email: sinhlun68@gmail.com
business email: nguyenchisinh68@gmail.com
tel: (+84) 868 188 473
grabcad
free
![NASA Regolith Drum E2](/t/5739616.jpg)
NASA Regolith Drum E2
...tries for this challenge:
https://grabcad.com/library/nasa-regolith-drum-e1-1
https://grabcad.com/library/nasa-regolith-drum-e3-1
grabcad
free
![NASA Regolith Drum E1](/t/5749684.jpg)
NASA Regolith Drum E1
...tries for this challenge:
https://grabcad.com/library/nasa-regolith-drum-e2-1
https://grabcad.com/library/nasa-regolith-drum-e3-1
grabcad
free
![Trapezoidal Drum](/t/5654337.jpg)
Trapezoidal Drum
...e is no moving part inside or outside except the entire drum itself which rotates.
please, do read the file conceptual_draft.pdf.
grabcad
free
![NASA SQUARE RASSOR DRUM](/t/5629505.jpg)
NASA SQUARE RASSOR DRUM
...egolith reverse the rassor drum.
specks
maximum scoops width 108 mm
mass 4.34 kg
diameter 366 mm
length 226.6 mm
volume 22 liters
Rassor
grabcad
free
![RASSOR-Casement cover](/t/5662945.jpg)
RASSOR-Casement cover
...et drum diameter: 450 mm
bucket drum length: 360 mm
volume of regolith captured: 41.16 liters (permissible volume 72%)
thank you
grabcad
free
![Rassor Bucket Drum Design improvement](/t/5624731.jpg)
Rassor Bucket Drum Design improvement
...dimensions of one scoop 85.5×44 mm (inner). digging speed approx. 15 mm/s. intended volume of regolith captured inside 22 liters.
grabcad
free
![Drum Scoop](/t/5621303.jpg)
Drum Scoop
...of addition to loosen up the dirt that the rassor would encounter. the drum ends up coming in at...
grabcad
free
![NASA RASSOR](/t/5621307.jpg)
NASA RASSOR
... own internal “pocket” to prevent any additional loss.
this will use a pickup and drop off method similar to the current rassor.
grabcad
free
![Altenhofer Drum Rassor](/t/5621309.jpg)
Altenhofer Drum Rassor
...altenhofer drum rassor
grabcad
dd
grabcad
free
![RASSOR DESIGN](/t/5621611.jpg)
RASSOR DESIGN
...coop to allow easier digging into material. overall a very simple design but makes many small improvements on the current design.
grabcad
free
![RASSOR design](/t/5621867.jpg)
RASSOR design
...release it back out the scoops. i have provided a file that shows the wall removed on the bucket so that the interior is visible.
grabcad
free
![NASA RASSOR BUCKET](/t/5640726.jpg)
NASA RASSOR BUCKET
... is a design for nasa rassor bucket. the total weight of the bucket is 4.94 kg. for unloading rotate the bucket counterclockwise.
grabcad
free
![A Weird Rassor drum](/t/5636173.jpg)
A Weird Rassor drum
...the connecting pipe and through it to the rover. it has titanium teeth that protect the carbon fibre from wear. hope you like it.
grabcad
free
![RASSOR Bucket Drum](/t/5637320.jpg)
RASSOR Bucket Drum
...here there are two drums on each arm. because the scoop width was limited to 87.5 mm, two drums can be engaged at the same time.
Nasa
3d_ocean
$15
![Stratosphere HDRI](/t/562185.jpg)
Stratosphere HDRI
...astronaut earth emu eva eva missions hdr hdri highres nasa outer space panorama planet refraction skydome space spaceship stars...
3d_ocean
$9
![HD Earth Model](/t/562385.jpg)
HD Earth Model
...hd earth model 3docean atmosphere clouds earth mars moon nasa ocean photorealistic planet poly realistic rock sky solar space...
3d_ocean
$9
![Realistic HD Earth Model](/t/562764.jpg)
Realistic HD Earth Model
...earth model 3docean 3dmodel atmosphere clouds earth mars moon nasa ocean photorealistic plane poly realistic rock sky solar stars...
3d_ocean
$29
![Spaceship Progress Soyuz](/t/571858.jpg)
Spaceship Progress Soyuz
...spaceship progress soyuz 3docean 3d cosmos iss launch mir nasa orbital rocket russian satellite ship solar space spacecraft sputnik...
3d_ocean
$5
![Sun Model](/t/578950.jpg)
Sun Model
...sun model 3docean atmosphere clouds mars moon nasa ocean photorealistic planet poly realistic rock sky solar space...
3d_ocean
$49
![New Horizons Space Probe](/t/583309.jpg)
New Horizons Space Probe
...3docean astronomy astrophysics c4d cinema 4d element 3d mission nasa new horizons obj pluto satellite space space probe spacecraft...
3d_ocean
$3
![Sun](/t/583717.jpg)
Sun
...sun 3docean cosmos earth galaxy milky moon nasa planet sky space sun system universe a sun model...
3d_ocean
$6
![HD Saturn Model](/t/578507.jpg)
HD Saturn Model
...hd saturn model 3docean atmosphere clouds mars moon nasa ocean photorealistic planet poly realistic rock saturn sky solar...
3d_ocean
$5
![Uranus Model](/t/588475.jpg)
Uranus Model
...uranus model 3docean atmosphere clouds mars moon nasa ocean photorealistic planet poly realistic rock sky solar space...
3d_ocean
$12
![Photoreal Earth Model](/t/586758.jpg)
Photoreal Earth Model
...earth model 3docean atmosphere clouds continent earth globe iss nasa ocean orbit planet science space terra turkey usa 21k...
Bucket
3d_export
$18
![Old wood bucket 3D Model](/t/283421.jpg)
Old wood bucket 3D Model
...ner dairy farm food metal milk old product retro shake wood wooden guido vrola
old wood bucket 3d model guidovrola 50185 3dexport
3ddd
$1
![Christopher guy 095-60-0253](/t/864030.jpg)
Christopher guy 095-60-0253
...of this spectacular over scaled sofa with three-quarter depth bucket back, wing arms and sabre legs. nail head as...
3d_ocean
$7
![Realistic Watering Can](/t/862001.jpg)
Realistic Watering Can
...realistic watering can 3docean bucket can container decor equipment flowering garden gardener home house...
3d_ocean
$29
![Garden tools collection](/t/862501.jpg)
Garden tools collection
...garden tools collection 3docean bucket cultivator farm garden gardening hedge trimmer hoe hose house...
3d_export
$15
![Milk Can 3D Model](/t/860009.jpg)
Milk Can 3D Model
...model 3dexport milk can churn metal container pail lidded bucket butter iron dairies cylindrical tall industrial tool dairy cow...
cg_studio
$20
![Paint Buckets3d model](/t/957444.jpg)
Paint Buckets3d model
... buckets
.obj .fbx .dxf .dae .c4d .3ds - paint buckets 3d model, royalty free license available, instant download after purchase.
3ddd
$1
![Moooi Bucket Lamp](/t/1002542.jpg)
Moooi Bucket Lamp
...+fbx
link:http://www.moooi.com/products/bucket-suspended-lamp http://www.moooi.com/products/bucket-floor-lamp
archive3d
free
![Bucket 3D Model](/t/1036048.jpg)
Bucket 3D Model
...n onion flowerpot spring onion
bucket 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
![Bucket 3D Model](/t/1036052.jpg)
Bucket 3D Model
...n onion spring onion flowerpot
bucket 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
![Bucket 3D Model](/t/1037190.jpg)
Bucket 3D Model
...n onion spring onion flowerpot
bucket 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Drum
3d_export
$5
![Oil Barrel 3D Model](/t/283298.jpg)
Oil Barrel 3D Model
...oil barrel 3d model 3dexport barrel oil cask cylinder drum pipe oil barrel 3d model miljkomocnik 73208...
3d_export
$10
![Radioactive Metal Drums Pallet 3D Model](/t/296403.jpg)
Radioactive Metal Drums Pallet 3D Model
...gasoline petrol gas rusty v-ray scanline max photorealistic high
radioactive metal drums pallet 3d model vkmodels 48181 3dexport
3d_export
$10
![Baby Drum 3D Model](/t/292766.jpg)
Baby Drum 3D Model
...y mental ray drum music sound toys children kids children's room fun wood baby
baby drum 3d model convexshapes 68860 3dexport
3ddd
$1
![BAYERN IVORY](/t/864008.jpg)
BAYERN IVORY
...turquoise and ivory crackle glazes. details lampshade: 18″ roman drum mocha linen shade code: white pvc base code: c/baye/iv...
3d_export
$15
![Drum Stand 3D Model](/t/860085.jpg)
Drum Stand 3D Model
...stra music band drumkit kit rack
drum stand 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl firdz3d 109123 3dexport
3ddd
$1
![NAIAD AMBER](/t/1001888.jpg)
NAIAD AMBER
...piece to piece. details base: zfy/g/nd/amb/ch shade: 14” roman drum premium satin chocolate shade lining: gold pvc shade code:...
3ddd
$1
![Lee Broom Salon Drum](/t/1001050.jpg)
Lee Broom Salon Drum
...drum
3ddd
lee broom , пуф
this is the lee broom ottoman in different size and materials.
archive3d
free
![Drum 3D Model](/t/1034450.jpg)
Drum 3D Model
...ent tambour drum kit
drum conga n310116 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
![Global Views Lighting Arabesque Round Marble Table Lamp](/t/999995.jpg)
Global Views Lighting Arabesque Round Marble Table Lamp
...8' clear silver cord, 3-way switch at socket round drum hardback shade with faux silk fabric self-trim. carved detailing...
3ddd
$1
![Charles Edwards - Hanging silk drum shade light](/t/994349.jpg)
Charles Edwards - Hanging silk drum shade light
...light
3ddd
charles edwards
модель люстры
charles edwards - hanging silk drum shade light
- мультисаб-материал
- fbx + obj + 3ds