Thingiverse
![Narrower slot](/previews/4774382.jpg)
Narrower slot
by Thingiverse
Last crawled date: 4 years, 4 months ago
I printed the 85x55mm Diamond case, but, as reported by others in the comments the slot is too wide and I found the case did not work - feeding two cards at once and blocking the slot.
This file is a modified version with the slot in the case narrowed. It now works perfectly with my business cards - feeding one at a time and without any blockages.
This file is a modified version with the slot in the case narrowed. It now works perfectly with my business cards - feeding one at a time and without any blockages.
Similar models
thingiverse
free
![BUSINESS CARD CASES by bob3dp](/t/8726959.jpg)
BUSINESS CARD CASES by bob3dp
... case. futhermore i narrowed the slot for the card to 0.5 mm, because with the original design i always got two cards coming out.
thingiverse
free
![Low PCI Backplane Extender by HAMMER_T](/t/8668723.jpg)
Low PCI Backplane Extender by HAMMER_T
...t unfortunately it didn´t work for my case. the cut in the atx backplane was too narrow. but maybe it will work for someone else.
thingiverse
free
![Dillon Case Feed Adapter by Tanders587](/t/8367548.jpg)
Dillon Case Feed Adapter by Tanders587
...te the file to work correctly and added labels to the case feed adapter.
i have attached a few case feeder adapters for your view
thingiverse
free
![Nexus 6 case with credit card slot by dvdnhm](/t/8866454.jpg)
Nexus 6 case with credit card slot by dvdnhm
...lued the card holder to the cases back with super glue.
i am planning to put it in an acetone vapor to make the surface smoother.
thingiverse
free
![RAMPS 128x64 Full Graphic Controller Board Case with sd card slot by Gesualdo](/t/8568703.jpg)
RAMPS 128x64 Full Graphic Controller Board Case with sd card slot by Gesualdo
...rd slot by gesualdo
thingiverse
i ve remix this since i need a slot for sd card, the original one was created for octopi i think
thingiverse
free
![Dock for iPhone 6 with credit card case by gerdescm](/t/8912233.jpg)
Dock for iPhone 6 with credit card case by gerdescm
...have a credit card slot.
the case i use is silk case intended to hold 3 cards. i expect this would fit most 2 or 3 card cases.
thingiverse
free
![Motorola Razr Case with Dual CC slot by jballard](/t/9031428.jpg)
Motorola Razr Case with Dual CC slot by jballard
...ile was designed in autodesk inventor 2013 original files not included, they are very messy and have a few dependencies.
enjoy.
thingiverse
free
![SD Card Case Holder by dallinski](/t/8527466.jpg)
SD Card Case Holder by dallinski
...h of a fit. if you want your cases held in with friction, i recommend taking about 0.1 mm off the shorter dimension of the slots.
thingiverse
free
![10 slot sd card case by JacobLinse](/t/8858860.jpg)
10 slot sd card case by JacobLinse
...d that slides in and out of the bottom of the case. i recommend using clear plastic for the lid so you can see your memory cards.
thingiverse
free
![Nintendo Switch Case (Added Card Slot) by nsbergquist](/t/8705386.jpg)
Nintendo Switch Case (Added Card Slot) by nsbergquist
... an additional game cartridge to be carried. may add slot at the bottom of the case for charging the switch while case is in use.
Narrower
thingiverse
free
![Narrow Spoon by aman95](/t/8373755.jpg)
Narrow Spoon by aman95
...narrow spoon by aman95
thingiverse
it is a spoon but narrow
thingiverse
free
![Narrow Boat by wookieegunner](/t/8576750.jpg)
Narrow Boat by wookieegunner
...narrow boat by wookieegunner
thingiverse
this is a narrowing of the boat by ege-ozgul by 50%
thingiverse
free
![*Narrow Vice by imaicom](/t/8086971.jpg)
*Narrow Vice by imaicom
...*narrow vice by imaicom
thingiverse
narrow vise with m3 long screws to adjust the gap.
thingiverse
free
![Narrow ClosetMaid Bracket](/t/4906952.jpg)
Narrow ClosetMaid Bracket
...wider trim to a bedroom, which required a new narrower type of bracket which the normal closetmaid bracket would...
thingiverse
free
![Narrow grinder for drill by YuvaArt](/t/8363233.jpg)
Narrow grinder for drill by YuvaArt
...inder for drill by yuvaart
thingiverse
made another grinder for the drill. designed for narrow holeshttps://youtu.be/0waanyj6dwa
thingiverse
free
![*Narrow wall test by imaicom](/t/9233443.jpg)
*Narrow wall test by imaicom
...*narrow wall test by imaicom
thingiverse
a printed specimen on a narrow wall. please use it as a printer performance test.
thingiverse
free
![Narrow Costume Dagger by GlitchTech](/t/9053121.jpg)
Narrow Costume Dagger by GlitchTech
...costume dagger by glitchtech
thingiverse
a narrow dagger for use in costumes. it was based off of the hellequin daggers from ac.
thingiverse
free
![Kazi narrow gauge tracks (with Lego narrow gauge adapters)](/t/4924937.jpg)
Kazi narrow gauge tracks (with Lego narrow gauge adapters)
...n r40 curve as well as the openscad file used to generate them. of course, you can generate your own different lengths and radii.
thingiverse
free
![Mini pcie narrower version. by MON5TERMATT](/t/8055990.jpg)
Mini pcie narrower version. by MON5TERMATT
...mini pcie narrower version. by mon5termatt
thingiverse
just made this narrower for my t61 laptop.
Slot
thingiverse
free
![PC slot cover for 3.5 inch drive slot](/t/4910188.jpg)
PC slot cover for 3.5 inch drive slot
...pc slot cover for 3.5 inch drive slot
thingiverse
pc slot cover for 3.5 inch drive slot
thingiverse
free
![Slot Cover - Bosch Rexroth - 8mm Slot by ChrisWhite85](/t/8370358.jpg)
Slot Cover - Bosch Rexroth - 8mm Slot by ChrisWhite85
...emix of the 10mm slot extrusion cover by bagabooo.
this one designed for 8mm slots in extrusion, tested on bosch rexroth profile.
thingiverse
free
![Hidden T slot for 2020 Aluminium V slot by magfurramdhani](/t/5105403.jpg)
Hidden T slot for 2020 Aluminium V slot by magfurramdhani
...slot for 2020 aluminium v slot by magfurramdhani
thingiverse
this hidden t slot for aluminium v slot
give it 100% for more rigid
thingiverse
free
![Slot Cover by pwing](/t/8982135.jpg)
Slot Cover by pwing
...slot cover by pwing
thingiverse
pc part slot cover
thingiverse
free
![Butter with spreader slot](/t/4874727.jpg)
Butter with spreader slot
...spreader slot
thingiverse
added a slot to hold relatively standard butter spreaders. slot is 22mm wide, 2mm deep, and 25mm tall.
thingiverse
free
![V-slot V slot Smooth rod 10mm mount by Zwiep](/t/8949082.jpg)
V-slot V slot Smooth rod 10mm mount by Zwiep
...v-slot v slot smooth rod 10mm mount by zwiep
thingiverse
v-slot v slot smooth rod 10mm mount
thingiverse
free
![Slots of Oval Slotted Convex Bracelet for Dual Color Print by teil3](/t/8919686.jpg)
Slots of Oval Slotted Convex Bracelet for Dual Color Print by teil3
...convex bracelet for dual color print by teil3
thingiverse
slots of oval slotted convex bracelet to use with a dualhead extruder.
thingiverse
free
![v slot bearing by emxyz](/t/8243104.jpg)
v slot bearing by emxyz
...v slot bearing by emxyz
thingiverse
v-slot bearing. cuscinetto v-slot
thingiverse
free
![slotted knob by derben](/t/8906342.jpg)
slotted knob by derben
...slotted knob by derben
thingiverse
slotted knob for a gravy pot or anything else that it will fit.