Thingiverse
NanoLR CF Plate & Accessories by aShellScript
by Thingiverse
Last crawled date: 4 years, 4 months ago
The purpose of this remix is to fix minimum radii to allow it to be cut from CF.
v5.1 final plate weights:
2mm CF: 8g
1.5mm CF: 6g
NOTES:
Do not use the v3 plate if you are going to use M2 screws for the FC, the holes are too big.
The jig is for drilling the holes in the 18650 holder.
CHANGELOG:
v5.1 - Updated 'circle' cutouts for motor mounts to actual circles not artifacty circles from the import process. 18650 holder holes moved from 2.0->2.1mm to match motor mounts. (This was sent out to be cut as v2.)v5 - Weight savings pass. Cutouts added and/or embiggened. 'Tail' lengthened by 3mm. FC holes moved from 2.0->1.8mm.v3 - Initial upload. Essentially direct copy of Dave_C's plate but with the cam mount cut off and any sharp points to have a minimum 1mm radius. (This was sent out to be cut as v1.)
v5.1 final plate weights:
2mm CF: 8g
1.5mm CF: 6g
NOTES:
Do not use the v3 plate if you are going to use M2 screws for the FC, the holes are too big.
The jig is for drilling the holes in the 18650 holder.
CHANGELOG:
v5.1 - Updated 'circle' cutouts for motor mounts to actual circles not artifacty circles from the import process. 18650 holder holes moved from 2.0->2.1mm to match motor mounts. (This was sent out to be cut as v2.)v5 - Weight savings pass. Cutouts added and/or embiggened. 'Tail' lengthened by 3mm. FC holes moved from 2.0->1.8mm.v3 - Initial upload. Essentially direct copy of Dave_C's plate but with the cam mount cut off and any sharp points to have a minimum 1mm radius. (This was sent out to be cut as v1.)