Thingiverse
Nanolongrange V2 GPS FPV drone with single 18650 by Unboxingexperience7
by Thingiverse
Last crawled date: 4 years, 2 months ago
Here is the improved version of my Nanolongrange FPV drone frame. Main advantages over V1 are
18650 and 21700 battery capable
lighter (<95g AUW)
GPS
Build:
The frame is based on the currently lightest available Whoop AIO board which need to be used due to its smaller form factor. The build is a bit more difficult as you need to solder! Moreover, the solder pads are quite small so you need a steady hand. The video shows all the building steps.
Parts used:
Happymodel DiamondF4 AIO
Flywoo Robo 1202.5 11500kv
Gemfan 3018 props
Beitian BN-180
Caddx Ant
Longrange RC System like Crossfire, Tracer, ELRS... I used ImmersionRC Ghost
3x 6mm and 10x 4mm M2 screws (I used Titanium to save around 1g over steel)
rubber bands
18650 and 21700 battery capable
lighter (<95g AUW)
GPS
Build:
The frame is based on the currently lightest available Whoop AIO board which need to be used due to its smaller form factor. The build is a bit more difficult as you need to solder! Moreover, the solder pads are quite small so you need a steady hand. The video shows all the building steps.
Parts used:
Happymodel DiamondF4 AIO
Flywoo Robo 1202.5 11500kv
Gemfan 3018 props
Beitian BN-180
Caddx Ant
Longrange RC System like Crossfire, Tracer, ELRS... I used ImmersionRC Ghost
3x 6mm and 10x 4mm M2 screws (I used Titanium to save around 1g over steel)
rubber bands