Thingiverse
nano drak motor mount
by Thingiverse
Last crawled date: 5 years, 7 months ago
suggested material to be used... TPU PETG or ABS
i used 100 infill with TPU you wont need to go more than 20-25 % if using other hard materials like PETG and ABS .
this should slide on to your mounting plate snugly with no play.
there are two versions one with 4 holes to mount and another with just two holes take your pick on what will work for u better.
i used 100 infill with TPU you wont need to go more than 20-25 % if using other hard materials like PETG and ABS .
this should slide on to your mounting plate snugly with no play.
there are two versions one with 4 holes to mount and another with just two holes take your pick on what will work for u better.