Thingiverse
![NA Miata Armrest by modifiedelement](/previews/8526413.jpg)
NA Miata Armrest by modifiedelement
by Thingiverse
Last crawled date: 3 years, 2 months ago
This is a replacement armrest for the center console portion of an NA Mazda Miata. Mine cracked so I designed this to take its place. I never got it fully printed before I unfortunately had to let the Miata go. The fitment should be correct as both halves were printed and set in the car but never fully mounted together with the pegs. It is split into 2 pieces in order to fit my print bed on a Wanhao Duplicator I3. I was going to fit it together with the pegs and glue to two halves once fitment was verified.
I printed each half standing straight up with the split facing down onto the bed. I printed with supports. I recommend ABS as I'm not sure PLA or PETG would stand up to sitting in the heat of the sun in the car.
Good luck! I hope it fits. If it needs some tweaking just let me know and I can provide my model files. This was designed in Fusion 360.
I printed each half standing straight up with the split facing down onto the bed. I printed with supports. I recommend ABS as I'm not sure PLA or PETG would stand up to sitting in the heat of the sun in the car.
Good luck! I hope it fits. If it needs some tweaking just let me know and I can provide my model files. This was designed in Fusion 360.
Similar models
thingiverse
free
![Go gopher golang mascot - split in half for ez FDM printing](/t/4971716.jpg)
Go gopher golang mascot - split in half for ez FDM printing
... and the pegs i downsized to 6.8mm - that seems to be just right on my printer for a nice snug fit that holds the piece together.
thingiverse
free
![Miata Ash Tray Cup Holder Adapter by rundmcarlson](/t/8865117.jpg)
Miata Ash Tray Cup Holder Adapter by rundmcarlson
... although you can print the halves and glue or acetone them together, i would recommend printing as one whole object if possible.
thingiverse
free
![Dremel 400 series 2 halves for Ender 3 and other shorter printers by stefi01](/t/9694177.jpg)
Dremel 400 series 2 halves for Ender 3 and other shorter printers by stefi01
...d added holes and pegs so it can be glued together and the pegs keep it glued together, fits dremel 4000 series so 4000 4300 etc.
thingiverse
free
![Transart Cheetor Stand Clip by MechaShapeShifter](/t/8365595.jpg)
Transart Cheetor Stand Clip by MechaShapeShifter
...lit in half, and you don't need to glue them together since the pegs on the figure and the stand hold them together securely.
thingiverse
free
![SPLIT (A & B) Uniden Ultimate SDS100 Stand by TwIzTuD](/t/8232329.jpg)
SPLIT (A & B) Uniden Ultimate SDS100 Stand by TwIzTuD
...ive to glue two pieces together is unknown since i just split this file in fusion 360 for reasons above. never printed one myself
thingiverse
free
![Gulf Oil sign by ukcat](/t/8832256.jpg)
Gulf Oil sign by ukcat
...es for gluing together....then mount on the pole to stand it up.
the middle section is made to do a color change for the letters.
thingiverse
free
![Fully Printable Microscope - 6" bed mod by SpaceCowboy850](/t/9034614.jpg)
Fully Printable Microscope - 6" bed mod by SpaceCowboy850
...see the individual lcds of my monitor screen. i've only split the kodak piece so far. i can split the other one if need be.
thingiverse
free
![MakerBot headphone stand split up by Cordless95](/t/9227453.jpg)
MakerBot headphone stand split up by Cordless95
... my 3d printer (flsun q5) i printed at 95% scale but still had to play around with the placement on it on the bed to make it fit
thingiverse
free
![Rubik's Cube Core Pegs by Marcopolo1613](/t/8713889.jpg)
Rubik's Cube Core Pegs by Marcopolo1613
...ed long for the sixth side to allow easier assembly.
the pegs can be glued into the core, or in my case they were a pressure fit.
thingiverse
free
![Flashforge Creator Pro Rounded Top Bridge by ianc1215](/t/8635742.jpg)
Flashforge Creator Pro Rounded Top Bridge by ianc1215
...nter. to solve the problem i split the model in half with tinkercad and created a peg and socket to join the two halves together.
Modifiedelement
thingiverse
free
![Trumpet/Cornet Wall Mount by modifiedelement](/t/8185694.jpg)
Trumpet/Cornet Wall Mount by modifiedelement
...ned around a king musical instruments cleveland 602 cornet. it may work with other brands/models but i have not tried any others.
thingiverse
free
![Taranis Thumb Hoops by modifiedelement](/t/8638045.jpg)
Taranis Thumb Hoops by modifiedelement
...nside edges for comfort.
i printed with the hoop portion laying flat on the build surface. supports touching build plate only.
Armrest
thingiverse
free
![ArmRest](/t/4898169.jpg)
ArmRest
...armrest
thingiverse
the armrest that goes with ball joint
thingiverse
free
![armrest by 3Dreamer_sweden](/t/9019030.jpg)
armrest by 3Dreamer_sweden
...armrest by 3dreamer_sweden
thingiverse
armrest for office chair
thingiverse
free
![Armrest for electric wheelchair](/t/4866862.jpg)
Armrest for electric wheelchair
...armrest for electric wheelchair
thingiverse
left and right armrest to protect people arms on an electric wheelchair
thingiverse
free
![Hinge of armrest](/t/4980389.jpg)
Hinge of armrest
...ch car had this armrest, but the golf mk3 is not. if anyone knows write in the comments.
check video https://youtu.be/ysxs_o1foj8
thingiverse
free
![armrest for TRAX by checo_delon](/t/8812691.jpg)
armrest for TRAX by checo_delon
...rmrest for trax by checo_delon
thingiverse
armrest for chevrolet trax, it can be mounted in current cupholder, printed using abs
thingiverse
free
![Armrest cover lock by Avtonomys](/t/8104256.jpg)
Armrest cover lock by Avtonomys
...armrest cover lock by avtonomys
thingiverse
armrest cover lock
thingiverse
free
![armrest for metal detector by canabis5v5](/t/8376391.jpg)
armrest for metal detector by canabis5v5
...armrest for metal detector by canabis5v5
thingiverse
armrest for metal detector
thingiverse
free
![Armrest for Luxman pd-272](/t/4770285.jpg)
Armrest for Luxman pd-272
...armrest for luxman pd-272
thingiverse
armrest for turnable luxman pd-272
thingiverse
free
![Sienna Armrest Button by mhussain360](/t/8171348.jpg)
Sienna Armrest Button by mhussain360
...sienna armrest button by mhussain360
thingiverse
designed the button for sienna 2013 armrest that broke.
thingiverse
free
![Honda Accord VI armrest clip](/t/4906431.jpg)
Honda Accord VI armrest clip
...honda accord vi armrest clip
thingiverse
replacement for original armrest clip
Miata
thingiverse
free
![Miata Schlüsselanhänger | Miata Keychain by Hoffy_90](/t/8351491.jpg)
Miata Schlüsselanhänger | Miata Keychain by Hoffy_90
...miata schlüsselanhänger | miata keychain by hoffy_90
thingiverse
schlüsselanhänger aus tpu gedruckt
keychain made with tpu
thingiverse
free
![2D Miata by nclontz2](/t/8997287.jpg)
2D Miata by nclontz2
...2d miata by nclontz2
thingiverse
2 dimensional miata
thingiverse
free
![Miata Shift Knob by texastboneking](/t/8956378.jpg)
Miata Shift Knob by texastboneking
...miata shift knob by texastboneking
thingiverse
average size miata shift knob. has inset miata logo.
thingiverse
free
![Miata (mx5) Keychain by nevinbusuttil](/t/8727968.jpg)
Miata (mx5) Keychain by nevinbusuttil
...miata (mx5) keychain by nevinbusuttil
thingiverse
enjoy the miata keychain!!!!!!
thingiverse
free
![Miata Cup Holder by Nightmare1944](/t/8713030.jpg)
Miata Cup Holder by Nightmare1944
...miata cup holder by nightmare1944
thingiverse
simple cupholder with miata logo on it
thingiverse
free
![Miata Keychain holder by Wyattcline321](/t/8621531.jpg)
Miata Keychain holder by Wyattcline321
...miata keychain holder by wyattcline321
thingiverse
i made this because i love miatas
thingiverse
free
![Miata Shift Knob by texastboneking](/t/8956379.jpg)
Miata Shift Knob by texastboneking
...miata shift knob by texastboneking
thingiverse
average sized shifter with raised miata logo
thingiverse
free
![Miata Door bushing by Lollixx](/t/5033331.jpg)
Miata Door bushing by Lollixx
...miata door bushing by lollixx
thingiverse
stiffer door bushings, fits all miata series
thingiverse
free
![Miata Logo by blazer34i](/t/8918598.jpg)
Miata Logo by blazer34i
...p make for a friend with a miata. i tried to get it as close to the original as possible.
scale, use and print as you see fit.
thingiverse
free
![Miata NA Keychain by Florent99](/t/8687226.jpg)
Miata NA Keychain by Florent99
...miata na keychain by florent99
thingiverse
great keychain miata na make a hole where you want to !
Na
thingiverse
free
![Bat Knife, na na na na na na, Bat Knife! by table192](/t/8921967.jpg)
Bat Knife, na na na na na na, Bat Knife! by table192
.../www.youtube.com/channel/uc1mwjy1r0ngqkxxrd9p-ztq
i highly recommend you follow him.
have fun printing! na na na na na bat knife!
thingiverse
free
![NA by Artesian](/t/8736420.jpg)
NA by Artesian
...na by artesian
thingiverse
na
thingiverse
free
![Wieszak na przewody](/t/4730090.jpg)
Wieszak na przewody
...wieszak na przewody
thingiverse
wieszak na rzewody
thingiverse
free
![na by kongming2014](/t/8961761.jpg)
na by kongming2014
...na by kongming2014
thingiverse
relief
thingiverse
free
![Raspberry Pi NAS (ArOZ NAS) v2](/t/4778321.jpg)
Raspberry Pi NAS (ArOZ NAS) v2
...d allow one 2.5 inch hdd to be placed in the hard disk container. ma6116a sata to usb adapter is recommended to use in this case.
thingiverse
free
![Držák na mobil s dírou na kabel](/t/4870816.jpg)
Držák na mobil s dírou na kabel
...držák na mobil s dírou na kabel
thingiverse
i did this for my cell phone to make it easier to be on it and charge it
thingiverse
free
![Qalby Etmaan (Al Nas Lal Nas) (People are there for each other) by Basouki](/t/9241361.jpg)
Qalby Etmaan (Al Nas Lal Nas) (People are there for each other) by Basouki
...al nas) (people are there for each other) by basouki
thingiverse
qalby etmaan
-al nas lal nas.
-people are there for each other.
thingiverse
free
![napis na swieta by dioxik](/t/8626228.jpg)
napis na swieta by dioxik
...napis na swieta by dioxik
thingiverse
napis na swieta
thingiverse
free
![Stojanek na buničinu by BarbarIoT](/t/8501400.jpg)
Stojanek na buničinu by BarbarIoT
...stojanek na buničinu by barbariot
thingiverse
stojanek na buničinu
thingiverse
free
![Kšilt na kolimátor](/t/4773180.jpg)
Kšilt na kolimátor
...kšilt na kolimátor
thingiverse
...