Thingiverse
Nürburgring GP - Wall Deco by mortalunity
by Thingiverse
Last crawled date: 4 years, 3 months ago
The Nürburgring GP Racetrack I designed for a Friend.
It has a full leght of 1,2 m
It's seperated in 12 parts. You'll need a printersize min. 200x200mm for the biggest part(9-10).
After Printing, glue it all together. Each part has a number for the right position.
It has two holes on the back for wall mounting.
Drilling distance: X 497.7 mm / Y 245 mm
The track can also be equipped with an LED strip for a beautiful indirect lighting.
For that you will need a leght of 3,26m for the outer ring, and 3,1m for the inner ring.
The strip can be max. 15mm in width.
It has a full leght of 1,2 m
It's seperated in 12 parts. You'll need a printersize min. 200x200mm for the biggest part(9-10).
After Printing, glue it all together. Each part has a number for the right position.
It has two holes on the back for wall mounting.
Drilling distance: X 497.7 mm / Y 245 mm
The track can also be equipped with an LED strip for a beautiful indirect lighting.
For that you will need a leght of 3,26m for the outer ring, and 3,1m for the inner ring.
The strip can be max. 15mm in width.