Thingiverse
My MDF Ikea LACK enclosure for ANET A8 by Didakis
by Thingiverse
Last crawled date: 3 years, 1 month ago
UPDATED January 31/2017: It seems that there was some problem with the STL of the upper parts.
.- Repaired and uploaded upper parts.
.- Added the magnet and the door plate.
.- As moving the top was very heavy, I put some latches on the sides.
As in a big city like Barcelona, living in an apartment is the usual thing, I needed an enclosure that would reduce the noise, and since I am preferably working on ABS, I would keep the heat.
Looking for solutions, I found the Ikea LACK enclosures. Unfortunately, all are oriented to transparent plastic plates, which are especially expensive, at least in Barcelona.
They also did not convince me as noise insulators, so I decided to use MDF plates, cheaper and easier to find.
I paid particular attention to the solution provided by OmNomNomagon, so I contacted him, in case he had time to make some changes, but at full Christmas, it could not be.
Heartfelt thanks, mate, if you read this.
So I decided to start designing my own pieces from scratch, using their inspiration as their own.
The size of the bases is 20 mm, and that of the extensions of 80mm, with which we raise the table 10cm.
The material, I got it at Leroy Merlin, that you can cut for free the MDF to measure. The one that I have used is:Tablero MDF, Two boards of 120x60X1.9, cut to 50x44.5, 3 pieces, (with the remainder, I requested a cut of 55x55, for future use).
For the door, I used the so-called Plastic Glass, made of polystyrene, which is very cheap, and easy to cut with a cutter, which I have used is:Vidrio Plástico, a board of 1x0.5 m x 2.5 mm, which I cut to 50x44.5.
The MDF boards are placed from the outside and screwed in from inside the legs and the upper clamping pieces, thus allowing to completely remove the assembly, leaving the printer exposed, to be able to operate it from all directions.
Although it was not necessary, he had planned to put a small neodymium magnet on the top right to ensure the door was closed.
To avoid vibration, and reduce the noise of the printer, I have placed a cut-off plate of CA-150, which I already had, of the insulation of the blinds of my flat.
Anyway, in Leroy Merlin, it is available: Panel de aislamiento acústico COPOPREN T CA-150 1000X1000X20MM.
** WARNING, the space that remains, between the right and left sides and the printer, is very small. It works for me, but maybe it's not what you expect.
With a small handle, some hinges, and a filament guide like this: Filament Guide Ikea Lack Table,I completed the enclosure.
If you need anything else, let me know.
.- Repaired and uploaded upper parts.
.- Added the magnet and the door plate.
.- As moving the top was very heavy, I put some latches on the sides.
As in a big city like Barcelona, living in an apartment is the usual thing, I needed an enclosure that would reduce the noise, and since I am preferably working on ABS, I would keep the heat.
Looking for solutions, I found the Ikea LACK enclosures. Unfortunately, all are oriented to transparent plastic plates, which are especially expensive, at least in Barcelona.
They also did not convince me as noise insulators, so I decided to use MDF plates, cheaper and easier to find.
I paid particular attention to the solution provided by OmNomNomagon, so I contacted him, in case he had time to make some changes, but at full Christmas, it could not be.
Heartfelt thanks, mate, if you read this.
So I decided to start designing my own pieces from scratch, using their inspiration as their own.
The size of the bases is 20 mm, and that of the extensions of 80mm, with which we raise the table 10cm.
The material, I got it at Leroy Merlin, that you can cut for free the MDF to measure. The one that I have used is:Tablero MDF, Two boards of 120x60X1.9, cut to 50x44.5, 3 pieces, (with the remainder, I requested a cut of 55x55, for future use).
For the door, I used the so-called Plastic Glass, made of polystyrene, which is very cheap, and easy to cut with a cutter, which I have used is:Vidrio Plástico, a board of 1x0.5 m x 2.5 mm, which I cut to 50x44.5.
The MDF boards are placed from the outside and screwed in from inside the legs and the upper clamping pieces, thus allowing to completely remove the assembly, leaving the printer exposed, to be able to operate it from all directions.
Although it was not necessary, he had planned to put a small neodymium magnet on the top right to ensure the door was closed.
To avoid vibration, and reduce the noise of the printer, I have placed a cut-off plate of CA-150, which I already had, of the insulation of the blinds of my flat.
Anyway, in Leroy Merlin, it is available: Panel de aislamiento acústico COPOPREN T CA-150 1000X1000X20MM.
** WARNING, the space that remains, between the right and left sides and the printer, is very small. It works for me, but maybe it's not what you expect.
With a small handle, some hinges, and a filament guide like this: Filament Guide Ikea Lack Table,I completed the enclosure.
If you need anything else, let me know.
Similar models
thingiverse
free
Remixed Hinge - Ender 3 Enclosure (IKEA Lack Table)
... i removed the bottom plate so the door can sit lower deeper in the hinge.
printed it with 100% infill and glued it to the doors.
thingiverse
free
Ikea Lack table enclosure parts - V2 - 7mm plates - corners by TimothyF
...walls ed. there is also an filament guide, which fits perfect into the ikea lack tables.
this parts are made for 7mm thick plates
thingiverse
free
Ikea Lack table enclosure parts - 3mm plates - hinge,corners,Filament guide,.. by TimothyF
...walls ed. there is also an filament guide, which fits perfect into the ikea lack tables.
this parts are made for 3mm thick plates
thingiverse
free
IKEA Lack enclosure side mounts 3mm mdf
...ikea lack enclosure side mounts 3mm mdf
thingiverse
ikea lack enclosure side mounts for 3mm mdf
thingiverse
free
Enclosure mini CNC 3018 by flaviocajao
... for 3mm glasses.
the upper supports are used from a publication that already exists with an enclosure for an ender 3 3d printer.
thingiverse
free
40mm upper leg extenders for Ender 3 IKEA LACK enclosure by gitaroktato
...the top of the printer, so i created 40mm upper leg extenders for the original project: https://www.thingiverse.com/thing:3052378
thingiverse
free
Acrylic Glass Holder and Door Hinge (IKEA Lack Enclosure) by Agent_Cain
...ounting method for the acrylic glasses. so curtly i made some simple ones for my needs.
designed to work with m5 screws and nuts.
thingiverse
free
Handle by karnschi
...handle by karnschi
thingiverse
handlebar for my ikea lack printer enclosures front plate
thingiverse
free
Enclosure joint for foam board enclosure by mduperly001
...he best part about this is you can tear it down in minutes. this is really long. in your slicer cut it down so it only 65mm tall.
thingiverse
free
Filament Guide for IKEA Lack enclosure by Geekdad_3D
...ad_3d
thingiverse
i made a filament guide to go through an ikea lack table used for an enclosure for my maker select v2 printer.
Didakis
thingiverse
free
Case for optocoupler module by Didakis
...to encapsulate the module for:https://www.thingiverse.com/thing:2906283
columns are not necessary, and may not fit in your board.
thingiverse
free
ANET A8 - Y Endstop for Makerbot switch by Didakis
...k switch.
be careful to fill 100%, because the nut gives pressure and can open the piece, like you can see on photo.
made in abs.
thingiverse
free
Spool Axis Support with zz608 by Didakis
...which have a larger central diameter.
if you think you recognize the original author, please let me know to give you your credit.
thingiverse
free
Thermocouple box, thermometer W1209. by Didakis
...other purposes.
i have not placed the thermocouple in any of the sites shown, it is only indicative.
i hope it is useful for you.
thingiverse
free
Z alignment card for Anet A8 & P3Steel by Didakis
...ce both pieces are placed, and with the motors step by step deactivated, you can manually align the height of z.
simple solution.
thingiverse
free
Diagram for capacitive sensor with relay module by Didakis
...jumper to low or high status, depending on the behavior required.
the best solution is: https://www.thingiverse.com/thing:2906283
thingiverse
free
ANET A8 - Extruder fan removable 3x1,5 Neodymium magnets. by Didakis
...1-5mm-strong-magnets-tiny-disc-ndfeb-rare-earth-for/32809339091.html
not need glue, but you can see on photos, !!one has fallen!!
thingiverse
free
Diagram for capacitive sensor with optocoupler module by Didakis
...e.com/thing:2914665
update 06/01/2018: check the pins on your motherboard, it may not correspond to the one shown in the diagram.
thingiverse
free
ANET A8 - Ramps 1.4 support for makerbot switch in parallel with inductive sensor on Z-min. by Didakis
...c pin from makerbot switch.
by the way, the cables are messy because i have not finished making modifications to the printer yet.
Lack
3d_export
$5
LACK LACK Coffee table white 90x55 cm IKEA
..., white, 90x55 cm ikea<br>https://www.ikea.com/ru/ru/p/lack-lakk-zhurnalnyy-stol-belyy-50449907/?ysclid=l8zshj49w6656165430
turbosquid
$4
Ikea Lack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
IKEA Lack Coffee Table
... кофейный
ikea lack coffee tablehttp://www.ikea.com/gb/en/catalog/products/00104291
turbosquid
$5
IKEA Lack Table
...ack table for download as blend, blend, unitypackage, and fbx on turbosquid: 3d models for games, architecture, videos. (1623135)
turbosquid
$10
Ikea Lack Set
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
IKEA Lack Library
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
IKEA LACK TABLE
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
IKEA Lack Shelf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Ikea Table 5 Lack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
IKEA Lack Side Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
A8
turbosquid
$47
Car A8
...
turbosquid
royalty free 3d model car a8 for download as max on turbosquid: 3d models for games, architecture, videos. (1196060)
turbosquid
$50
Audi A8
...yalty free 3d model audi a8 for download as 3dm, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1580187)
turbosquid
$15
Audi A8
...lty free 3d model audi a8 for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1387519)
turbosquid
$500
Audi A8
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Audi A8 3D Model
...audi a8 3d model
3dexport
audi a8 cars car
audi a8 3d model ma 20351 3dexport
3d_export
$5
Audi A8 3D Model
...audi a8 3d model
3dexport
3d model of audi a8
audi a8 3d model badyaka 12136 3dexport
3d_ocean
$89
Audi A8 2010
...usiness car car class class f f german german luxury luxury s s s8 s8 sedan sedan vehicle vehicle
new audi a8 2010 detaled model.
turbosquid
$39
A8 2018
...a8 2018 for download as 3ds, obj, wrl, c4d, fbx, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1345349)
turbosquid
free
audi a8 l
...rbosquid
royalty free 3d model audi a8 l for download as obj on turbosquid: 3d models for games, architecture, videos. (1663016)
3d_ocean
$45
Audi A8 restyled
...our door vehicle was created in blender3d 2.62.realistic renderings were created with yafaray 0.1.2 realistic plugin.rendering...
Anet
thingiverse
free
Anet by derbodesign
...anet by derbodesign
thingiverse
logo anet
thingiverse
free
Anet e10 , Anet v1.0 by jonathan_943D
...anet e10 , anet v1.0 by jonathan_943d
thingiverse
soporte de ventilador de 80mm, para controladora anet v1.0
thingiverse
free
Anet A8 Anet AM8 Y belt holder
...anet a8 anet am8 y belt holder
thingiverse
anet a8 anet am8 y belt holder
thingiverse
free
Anet A8 Probe Bracket for anet sensor by chelrix
...anet a8 probe bracket for anet sensor by chelrix
thingiverse
anet a8 probe bracket for anet official sensor and marlin firmware
thingiverse
free
Anet logo by JUST3D_PRNTNG
...anet logo by just3d_prntng
thingiverse
anet logo
thingiverse
free
Fan nozzle for Anet A8 with original Anet levelsensor by peteruhlmann
...et levelsensor by peteruhlmann
thingiverse
here is an improved fan nozzle for the anet a8 with original level sensor from anet.
thingiverse
free
Anet Et4 Box
...anet et4 box
thingiverse
tool box for anet et4
thingiverse
free
Anet Logo by Superflex_Plastic_Fantastic
...anet logo by superflex_plastic_fantastic
thingiverse
anet logo to incorporate into designs.
thingiverse
free
Box for Anet ET4
...box for anet et4
thingiverse
this is a simple box for tool of anet et4
thingiverse
free
Anet V1.0 Board Kühlung (80mm Lüfter) / Anet A8 by MadCre8
...anet v1.0 board kühlung (80mm lüfter) / anet a8 by madcre8
thingiverse
anet v1.0 board kühlung (80mm lüfter) / anet a8
Mdf
3ddd
$1
MDF Panel
...mdf panel
3ddd
панель
mdf panel design
3ddd
$1
MDF / BAY
...mdf / bay
3ddd
bay , mdf italia
диван "bay"
*turbosmooth присутствует
3ddd
$1
Arch,MDF Italia
...arch,mdf italia
3ddd
arch , mdf italia
mdf italia,arch,диван.
3ddd
$1
mdf italia sign
...lia sign
3ddd
mdf italia , om
mdf italia sign
designer: piergiorgio cazzaniga
year: 2006
turbosquid
$5
MDF NET
...et
turbosquid
royalty free 3d model mdf net for download as on turbosquid: 3d models for games, architecture, videos. (1539910)
3ddd
$1
MDF Italia
... mdf italia
this is our first model, many to come ! it is a bit high poly, but the details are worth it imho. enjoy
3d_ocean
$7
MDF Rock Table
...mdf rock table
3docean
c4d cinema4d mdf rock table vray vrayforc4d
mdf rock table 5 table set in cinema 4d
turbosquid
$60
mdf jali
...free 3d model mdf jali for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1402097)
3ddd
$1
MDF Armchair
...mdf armchair
3ddd
mdf
мягкое кресло с мдф боковинами.
10 вариантов обивки в архиве!!
size: 560 x 610 x 850 (h) mm
3ddd
$1
MDF Italia - Sliding Sofia
...mdf italia - sliding sofia
3ddd
mdf italia
mdf italia - sliding sofia
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , стеллаж
ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
кухня ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
осторожно, тяжелая модель
ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
5 зеркал от ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , бойа
ikea светильник потолочный
3ddd
$1
IKEA
...ikea
3ddd
ikea , барный
bar stool ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , зубная щетка , косметика
ikea
3ddd
free
IKEA
...ikea
3ddd
ikea , трюмо
дамский столик ikea.
3ddd
$1
IKEA
...3ddd
ps , декоративный набор , ikea
ikea decor
3ddd
$1
Ikea
...ikea
3ddd
ikea , lagra
модель лампы от ikea