Thingiverse
My HyperCube Evolution by DaHai8
by Thingiverse
Last crawled date: 3 years, 1 month ago
THIS IS A WORK IN PROGRESS
My version of the HyperCube Evolution, based heavily on the work by Scott_3D and Tech2C. My plans are to feature dual Z axis motors on a smallish 200x200x200mm build volume using 32bit Marling controller board and a direct-drive extruder (probably the E3D Titan Aero).
I have started a new PlayList on my YouTube Channel to walk through each step of the build: https://www.youtube.com/playlist?list=PLJX30NW4d60PdxcPWZcrLxaXvndv3tkGq
And will update this Thingi page with the Printed Parts, Parts Lists, and link to each video as they are produced.
Please refer to Tech2c and Scott_3D Thingi pages for more information on the HyperCube & HyperCube Evolution 3D Printers (referenced in the Remixed From section on this page)
I welcome feedback and suggestions during this process as my goal is to produce a highly accurate, and fast (up to 80mm/s) 3D Printer (within reason :) ).
Part 1 - Building the Frame
YouTube Video: https://youtu.be/bWggeeBoFs8
Purchased Items:
4 x 3030 450mm Extruded Aluminum Frame
4 x 3030 320mm Extruded Aluminum Frame
6 x 3030 310mm Extruded Aluminum Frame
20 x Angle (L) Brackets that match the Extruded Aluminum ProfileNote: Mounting holes are 16mm & 11mm center to inside corner of L bracket
40 x m6x10mm Button-head Screws
16 x M5x10mm Button-head Screws
16 x M5 T-Nuts for 3030 Extruded Aluminum Frames
Printed Items:
20 x Vertical Corner Brackets: Corner Bracket 3030M6.stlNote: Holes are 13.5-16mm and 11-13.5mm center to corner to accommodate different Angle (L) Brackets
8 x Horizontal Corner Brackets : Corner Bracket 3030M5.stl
4 x Feet: Foot 100 micron.stl or Foot 200 micron.stl
4 x Caps: Cap 100 micron.stl or Cap 200 micron.stl
NOTE: The Brackets, Feet and Caps are designed for my particular Extruded Aluminum Profile, your's might be different (see included diagram)
Part 2 - Y Axis Assembly
YouTube Video: https://youtu.be/iSqgmtMIO4g
Purchased Items:
2 x Nema 17 42mm Stepper Motors
2 x GT2 Timing Pulley (20 teeth) 5mm bore for 6mm belt
4 x M5x10mm Button Head Screw - Mount Stepper Motor Mount & Idler Mount to Frame
4 x M5 T-Nut for 3030 - Mount XY Stepper Motor Mount & Idler Mount to Frame - Taken from Corner Brackets
4 x M3x20mm Hex Head Screws - clamp Linear Rods to their Printed Mounts
4 x M3x8mm Hex Head Screws to Mount Stepper Motor
2 x M3x6mm Hex Head Screws to Mount Stepper Motor
4 x GT2 Idler Pulley (20 teeth) 3mm bore for 6mm belt Idler Pullies - to Idler Mounts
2 x M3x30mm Hex Head Screws for Idler Pullies to Idler Mounts
6+ M3 Washers for between Idler Pullies
6 x M3 Brass threaded inserts for Stepper Motor Mounts & Idler Mounts
2 x 10mm Dia 310mm long Linear Guide Rods
4 x LM10UU 10mm Linear Ball Bearings
2 x M6x10 (or 8) Grub (Set) Screws - should already be included with the L Brackets
Reused Parts:
10 x M6x10mm Button Head Screws - mount XY Stepper Motor Mount & Idler Mount to Frame. Reused from the 6 replaced 3030 M6 Corner Brackets
Printed Items:
1 x Left Stepper Motor Mount: StepperMotor Mount Left.stl
1 x Right Stepper Motor Mount: StepperMotor Mount Right.stl
1 x Left Idler Mount: XY Idler Mount Left.stl
2 x Right Idler Mount: XY Idler Mount Right.stl
Part 3 - X Axis Assembly
YouTube Video: https://youtu.be/8U2uHQMUK4k
Purchased Items:
2 x 8mm dia x 350mm long linear rods
4 x LM8UU 8mm Linear Ball Bearings
2 x GT2 20 tooth 3mm bore smooth idler pullies
2 x GT2 20 tooth 3mm bore toothed idler pullies
4 x m3x30mm hex head screws
12 x m3x14mm hex head screws
4 x m3 nuts
6 x m3x8mm hex head screws
4 x m3x12mm hex head screws
22 x m3 Brass threaded inserts
4 x 3mm x 12mm dowel pins
2 x m3 grub screws (set screws) or m3x6mm hex head screws
5m Polyurethane GT2 6mm belt
Printed Items:
The following Printed Parts in this segment come unmodified from Scott_3D HyperCube Evolution Thingiverse Page and can be downloaded from his page: https://www.thingiverse.com/thing:2254103
2 x Y_Carriage_xDia8_LM10UU_1.0.stl
2 x X_End_Stop_Flag_1.0.stl
1 x Y_End_Stop_Flag_1.0.stl
1 x X_Carriage_1.0.stl
4 x Belt_Tensioner_1.0.stl
2 x Belt_Clamp_1.0.stl
Modified Printed Items (found on this page's 'Things' tab):
2 x Y_Carriage_Clamp.stl - for through screw holes
Part 4 - Z-Axis and Hot-Bed Assembly
YouTube Video: https://youtu.be/WmAdlwzydTA
Purchased Items:
1 x 214x214x3mm 24V MK3 Heated Bed
2 2020 140mm Aluminum Extrusions
2 2020 315mm Aluminum Extrusions
4 x 2020 L-Brackets
8 x M4 Sets Screws for L-Brackets
2 x NEMA 17 42mm Stepper Motors
4 x 12mm Dia x 300 Linear Rods
8 x LM12UU 12mm Linear Ball Bearings
2 x 8mm x 270mm Lead Screw
2 x Anti Backlash 8mm Bearings
2 x 5mm to 8mm Couplers
56 x M5x10 Button Head Screws
24 x M5 3030 T-Nuts
32 x M5 2020 T-Nuts
8 x M3x8 Hex Head Screws
8 x m3x12 Hex Head Screws
8 x m3x25 Hex Head Screws
4 x m3x30 Hex Head Screws
12 x m3 nuts
8 x m3 Brass Theaded Inserts
4 x m3 Nylon Washers
8 x m3 Washers
4 x m3 bed springs
Printed Items:
The following Printed Parts in this segment come unmodified from Scott_3D HyperCube Evolution Thingiverse Page and can be downloaded from his page: https://www.thingiverse.com/thing:2254103
4 x Z_Axis_Bearing_Holder
2 x Z_Nut_Brackets
2 x Z_Axis_Linear_RailBracket-_Left_1.0
2 x Z_Axis_Linear_RailBracket-_Right_1.0
Modified Printed Items (found on this page's 'Things' tab):
4 x Bed_Brackets 15mm
Courtesy of Larry Cluster from Fackbook:
2 x 12mm Linear Rod Top Mount 12.40
2 x 12mm Linear Rod Top Mount 12.40 (mirrored)
Part 5 - Electronics & Power
YouTube Video: https://youtu.be/zzgPEO7CoHM
Tools:
DuPont Crimping tool (Example: SN-28B)
Soldering Iron
Purchased Items:
1 x 24V15A Power Supply (215x115x50mm)
1 x 6015 12V (or higher) Fan
1 x 12864 ReRap Discount Full Graphics LCD Screen
1 x Azteeg X5 GT Controller Board
1 x 1m 15A Rated wiring for the PWS and PWS to Controller Board
1 x 15A Rated Power Socket & Switch with Fuse
9 x 15A Rated Type 'O' Cold Pressed Terminals
5 x 15A Rated Female Quick Disconnect Terminals
Pair of 12864 GLCD Ribbon Cables.
12 x 2.54mm DuPont Female Jumper Head Connectors (Fan and Ribbon Cables)
4 x Stepper Motor Cables
12 x 2.54mm DuPoint Male Pin Connectors (Stepper Motor Cables)
2mm Dia Heat Shrink Electrical Insulation Tubing (Stepper Motor Connections to Controller)
2 x 2.8mm wide Tab & Jacket Cold Pressed Male Connectors
4 x M5x10 Button Head Screws and 3030 T-Nuts
2 x M3x6 Hex Flat Head Screws (Power Supply Switch Plate)
8 x M4x6 Hex Head Screws and Washers (Power Supply to Cover & Controller Case)
4 x M3x4(or 5) Hex Head Screws (Controller Mounts)
10 x Brass Threaded Inserts
4 x M3x8 Hex Head Screws & washers
4 x M3x10 Hex Head Screws (GLCD to Case)
4 x M5x12 Fan Mounting Screws
2 x TMC2130 Stepper Drivers in Standalone Mode (X & Y)
2 x A4988 Stepper Drivers (Z and Extruder)
Printed Items:
1 x Controller Board Case.stl
1 x Controller Board Case Lid.stl
1 x LCD Case.stl
1 x Power Supply Cover.stl
1+ x 3030 Side Caps.stl (Scaled lengthwise to size)
Part 6 - It Prints!
YouTube Video: https://youtu.be/2Ph9MooEZAk
Purchased Items:
1 x E3D Aero Titan Extruder 24v (clone - boooooo)
1 x 200x200mm PrintBite Print Bed Surface (yay!!)
1 x 3A 5V UBEC Voltage Converter (5.5-26V input)
1 x Raspberry Pi 3B/3B+
1 x USB 2.0 to USB B Cable Double Left Elbow (20cm)
1 x HT100K Thermistor for Hot-End
1 x 100K Thermistor for Bed
3 x 3D Printer Optical Enstops
2 x M3x5 Hex Head Screws (for Y and Z Optical Endstops)
3 x M5x10 Button Head Screws and 3030 T-Nuts (for Enstops and Flag)
1 x M3x35 Hex Head Screw & Nut (for Extruder Mount)
2 x M3x8 Hex Head Screws (for Extruder Mount to Extruder Frame)
Printed Items:
1 x Extruder Mount.stl
1 x Z Optical Endstop Flag.stl
1 x Z Optical Endstop Mount.stl
1 x Y Optical Endstop Mount.stl
Part 7 - Great Prints!
YouTube Video: https://youtu.be/WLup8gFgH30
Purchased Items:
Fan duct to extruder mount
2 x M3x16 Hex Head Screws
2 x m3 Brass Threaded Inserts
Fan motor mount
2 x m3x20 Hex Head Screws
2 x m3 Brass Threaded Inserts
Spool Holder
2 x M5x10 Button Head Screws
2 x M5 T-Nuts for 3030 Extruded Aluminum
Printed Items:
1 x Spool Holder.stl
1 x Spool Holder v2.stl
1 x Part Cooling Fan Duct.stl
1 x Extruder Mount and Cable Constraint.stl
Part 8 - Hemera Extruder!
YouTube Video: https://youtu.be/WEtp-sWl3RQ
Purchased Items:
Hemera Adapter to Hemera Extruder
4 x M3x8 Hex Head Screws
Hemera Part Cooling Duct to Hemera Adapter
2 x M3x12 Hex Head Screws
2 x m3 Brass Threaded Inserts
Fan to Hemera Part Cooling Duct
2 x m3x20 Hex Head Screws
2 x m3 Brass Threaded Inserts
Printed Items:
1 x Hemera Adapter.stl
1 x Hemera Part Cooling Duct.stl
Part 8a - MKS & SKR Contoller Board Case v2
Modifed the Controller Board Case to v2 to support the MKS Gen L, MKS SGEN, SKR 1.3 and SKR 1.4 mainboards. All of these boards have the same dimensions and screw hole offsets, so they should all work with this version.
NOTE: I have not yet printed this, but the dimensions are accurate. Also you will need a 'left elbo' USB Type A cable to connect to the mainboard as there is not enough room for a straight connector.
Printed Items:
1 x Controller Board Case v2.stl
Purchased Items:
4 x m3x5mm Brass Threaded Inserts
My version of the HyperCube Evolution, based heavily on the work by Scott_3D and Tech2C. My plans are to feature dual Z axis motors on a smallish 200x200x200mm build volume using 32bit Marling controller board and a direct-drive extruder (probably the E3D Titan Aero).
I have started a new PlayList on my YouTube Channel to walk through each step of the build: https://www.youtube.com/playlist?list=PLJX30NW4d60PdxcPWZcrLxaXvndv3tkGq
And will update this Thingi page with the Printed Parts, Parts Lists, and link to each video as they are produced.
Please refer to Tech2c and Scott_3D Thingi pages for more information on the HyperCube & HyperCube Evolution 3D Printers (referenced in the Remixed From section on this page)
I welcome feedback and suggestions during this process as my goal is to produce a highly accurate, and fast (up to 80mm/s) 3D Printer (within reason :) ).
Part 1 - Building the Frame
YouTube Video: https://youtu.be/bWggeeBoFs8
Purchased Items:
4 x 3030 450mm Extruded Aluminum Frame
4 x 3030 320mm Extruded Aluminum Frame
6 x 3030 310mm Extruded Aluminum Frame
20 x Angle (L) Brackets that match the Extruded Aluminum ProfileNote: Mounting holes are 16mm & 11mm center to inside corner of L bracket
40 x m6x10mm Button-head Screws
16 x M5x10mm Button-head Screws
16 x M5 T-Nuts for 3030 Extruded Aluminum Frames
Printed Items:
20 x Vertical Corner Brackets: Corner Bracket 3030M6.stlNote: Holes are 13.5-16mm and 11-13.5mm center to corner to accommodate different Angle (L) Brackets
8 x Horizontal Corner Brackets : Corner Bracket 3030M5.stl
4 x Feet: Foot 100 micron.stl or Foot 200 micron.stl
4 x Caps: Cap 100 micron.stl or Cap 200 micron.stl
NOTE: The Brackets, Feet and Caps are designed for my particular Extruded Aluminum Profile, your's might be different (see included diagram)
Part 2 - Y Axis Assembly
YouTube Video: https://youtu.be/iSqgmtMIO4g
Purchased Items:
2 x Nema 17 42mm Stepper Motors
2 x GT2 Timing Pulley (20 teeth) 5mm bore for 6mm belt
4 x M5x10mm Button Head Screw - Mount Stepper Motor Mount & Idler Mount to Frame
4 x M5 T-Nut for 3030 - Mount XY Stepper Motor Mount & Idler Mount to Frame - Taken from Corner Brackets
4 x M3x20mm Hex Head Screws - clamp Linear Rods to their Printed Mounts
4 x M3x8mm Hex Head Screws to Mount Stepper Motor
2 x M3x6mm Hex Head Screws to Mount Stepper Motor
4 x GT2 Idler Pulley (20 teeth) 3mm bore for 6mm belt Idler Pullies - to Idler Mounts
2 x M3x30mm Hex Head Screws for Idler Pullies to Idler Mounts
6+ M3 Washers for between Idler Pullies
6 x M3 Brass threaded inserts for Stepper Motor Mounts & Idler Mounts
2 x 10mm Dia 310mm long Linear Guide Rods
4 x LM10UU 10mm Linear Ball Bearings
2 x M6x10 (or 8) Grub (Set) Screws - should already be included with the L Brackets
Reused Parts:
10 x M6x10mm Button Head Screws - mount XY Stepper Motor Mount & Idler Mount to Frame. Reused from the 6 replaced 3030 M6 Corner Brackets
Printed Items:
1 x Left Stepper Motor Mount: StepperMotor Mount Left.stl
1 x Right Stepper Motor Mount: StepperMotor Mount Right.stl
1 x Left Idler Mount: XY Idler Mount Left.stl
2 x Right Idler Mount: XY Idler Mount Right.stl
Part 3 - X Axis Assembly
YouTube Video: https://youtu.be/8U2uHQMUK4k
Purchased Items:
2 x 8mm dia x 350mm long linear rods
4 x LM8UU 8mm Linear Ball Bearings
2 x GT2 20 tooth 3mm bore smooth idler pullies
2 x GT2 20 tooth 3mm bore toothed idler pullies
4 x m3x30mm hex head screws
12 x m3x14mm hex head screws
4 x m3 nuts
6 x m3x8mm hex head screws
4 x m3x12mm hex head screws
22 x m3 Brass threaded inserts
4 x 3mm x 12mm dowel pins
2 x m3 grub screws (set screws) or m3x6mm hex head screws
5m Polyurethane GT2 6mm belt
Printed Items:
The following Printed Parts in this segment come unmodified from Scott_3D HyperCube Evolution Thingiverse Page and can be downloaded from his page: https://www.thingiverse.com/thing:2254103
2 x Y_Carriage_xDia8_LM10UU_1.0.stl
2 x X_End_Stop_Flag_1.0.stl
1 x Y_End_Stop_Flag_1.0.stl
1 x X_Carriage_1.0.stl
4 x Belt_Tensioner_1.0.stl
2 x Belt_Clamp_1.0.stl
Modified Printed Items (found on this page's 'Things' tab):
2 x Y_Carriage_Clamp.stl - for through screw holes
Part 4 - Z-Axis and Hot-Bed Assembly
YouTube Video: https://youtu.be/WmAdlwzydTA
Purchased Items:
1 x 214x214x3mm 24V MK3 Heated Bed
2 2020 140mm Aluminum Extrusions
2 2020 315mm Aluminum Extrusions
4 x 2020 L-Brackets
8 x M4 Sets Screws for L-Brackets
2 x NEMA 17 42mm Stepper Motors
4 x 12mm Dia x 300 Linear Rods
8 x LM12UU 12mm Linear Ball Bearings
2 x 8mm x 270mm Lead Screw
2 x Anti Backlash 8mm Bearings
2 x 5mm to 8mm Couplers
56 x M5x10 Button Head Screws
24 x M5 3030 T-Nuts
32 x M5 2020 T-Nuts
8 x M3x8 Hex Head Screws
8 x m3x12 Hex Head Screws
8 x m3x25 Hex Head Screws
4 x m3x30 Hex Head Screws
12 x m3 nuts
8 x m3 Brass Theaded Inserts
4 x m3 Nylon Washers
8 x m3 Washers
4 x m3 bed springs
Printed Items:
The following Printed Parts in this segment come unmodified from Scott_3D HyperCube Evolution Thingiverse Page and can be downloaded from his page: https://www.thingiverse.com/thing:2254103
4 x Z_Axis_Bearing_Holder
2 x Z_Nut_Brackets
2 x Z_Axis_Linear_RailBracket-_Left_1.0
2 x Z_Axis_Linear_RailBracket-_Right_1.0
Modified Printed Items (found on this page's 'Things' tab):
4 x Bed_Brackets 15mm
Courtesy of Larry Cluster from Fackbook:
2 x 12mm Linear Rod Top Mount 12.40
2 x 12mm Linear Rod Top Mount 12.40 (mirrored)
Part 5 - Electronics & Power
YouTube Video: https://youtu.be/zzgPEO7CoHM
Tools:
DuPont Crimping tool (Example: SN-28B)
Soldering Iron
Purchased Items:
1 x 24V15A Power Supply (215x115x50mm)
1 x 6015 12V (or higher) Fan
1 x 12864 ReRap Discount Full Graphics LCD Screen
1 x Azteeg X5 GT Controller Board
1 x 1m 15A Rated wiring for the PWS and PWS to Controller Board
1 x 15A Rated Power Socket & Switch with Fuse
9 x 15A Rated Type 'O' Cold Pressed Terminals
5 x 15A Rated Female Quick Disconnect Terminals
Pair of 12864 GLCD Ribbon Cables.
12 x 2.54mm DuPont Female Jumper Head Connectors (Fan and Ribbon Cables)
4 x Stepper Motor Cables
12 x 2.54mm DuPoint Male Pin Connectors (Stepper Motor Cables)
2mm Dia Heat Shrink Electrical Insulation Tubing (Stepper Motor Connections to Controller)
2 x 2.8mm wide Tab & Jacket Cold Pressed Male Connectors
4 x M5x10 Button Head Screws and 3030 T-Nuts
2 x M3x6 Hex Flat Head Screws (Power Supply Switch Plate)
8 x M4x6 Hex Head Screws and Washers (Power Supply to Cover & Controller Case)
4 x M3x4(or 5) Hex Head Screws (Controller Mounts)
10 x Brass Threaded Inserts
4 x M3x8 Hex Head Screws & washers
4 x M3x10 Hex Head Screws (GLCD to Case)
4 x M5x12 Fan Mounting Screws
2 x TMC2130 Stepper Drivers in Standalone Mode (X & Y)
2 x A4988 Stepper Drivers (Z and Extruder)
Printed Items:
1 x Controller Board Case.stl
1 x Controller Board Case Lid.stl
1 x LCD Case.stl
1 x Power Supply Cover.stl
1+ x 3030 Side Caps.stl (Scaled lengthwise to size)
Part 6 - It Prints!
YouTube Video: https://youtu.be/2Ph9MooEZAk
Purchased Items:
1 x E3D Aero Titan Extruder 24v (clone - boooooo)
1 x 200x200mm PrintBite Print Bed Surface (yay!!)
1 x 3A 5V UBEC Voltage Converter (5.5-26V input)
1 x Raspberry Pi 3B/3B+
1 x USB 2.0 to USB B Cable Double Left Elbow (20cm)
1 x HT100K Thermistor for Hot-End
1 x 100K Thermistor for Bed
3 x 3D Printer Optical Enstops
2 x M3x5 Hex Head Screws (for Y and Z Optical Endstops)
3 x M5x10 Button Head Screws and 3030 T-Nuts (for Enstops and Flag)
1 x M3x35 Hex Head Screw & Nut (for Extruder Mount)
2 x M3x8 Hex Head Screws (for Extruder Mount to Extruder Frame)
Printed Items:
1 x Extruder Mount.stl
1 x Z Optical Endstop Flag.stl
1 x Z Optical Endstop Mount.stl
1 x Y Optical Endstop Mount.stl
Part 7 - Great Prints!
YouTube Video: https://youtu.be/WLup8gFgH30
Purchased Items:
Fan duct to extruder mount
2 x M3x16 Hex Head Screws
2 x m3 Brass Threaded Inserts
Fan motor mount
2 x m3x20 Hex Head Screws
2 x m3 Brass Threaded Inserts
Spool Holder
2 x M5x10 Button Head Screws
2 x M5 T-Nuts for 3030 Extruded Aluminum
Printed Items:
1 x Spool Holder.stl
1 x Spool Holder v2.stl
1 x Part Cooling Fan Duct.stl
1 x Extruder Mount and Cable Constraint.stl
Part 8 - Hemera Extruder!
YouTube Video: https://youtu.be/WEtp-sWl3RQ
Purchased Items:
Hemera Adapter to Hemera Extruder
4 x M3x8 Hex Head Screws
Hemera Part Cooling Duct to Hemera Adapter
2 x M3x12 Hex Head Screws
2 x m3 Brass Threaded Inserts
Fan to Hemera Part Cooling Duct
2 x m3x20 Hex Head Screws
2 x m3 Brass Threaded Inserts
Printed Items:
1 x Hemera Adapter.stl
1 x Hemera Part Cooling Duct.stl
Part 8a - MKS & SKR Contoller Board Case v2
Modifed the Controller Board Case to v2 to support the MKS Gen L, MKS SGEN, SKR 1.3 and SKR 1.4 mainboards. All of these boards have the same dimensions and screw hole offsets, so they should all work with this version.
NOTE: I have not yet printed this, but the dimensions are accurate. Also you will need a 'left elbo' USB Type A cable to connect to the mainboard as there is not enough room for a straight connector.
Printed Items:
1 x Controller Board Case v2.stl
Purchased Items:
4 x m3x5mm Brass Threaded Inserts
Similar models
thingiverse
free
Hemera Part Cooler for 5015 Radial Blower - V1.0 by NigelWest
...8 and cut them down to size). note: make sure not to damage the stepper motor case by using too long screws or over tightening.
thingiverse
free
Removable Hemera Part Cooler for 5015 Radial Blower - V1.1 by NigelWest
... the stepper motor case by using too long screws or over tightening.
1 off m3x12 set screw - used to adjust the height of the fan
thingiverse
free
Compact Bowden Extruder Plus by mrm64
...m previous version
made left and right idlers the same thickness
reduced cylinder size
related thing
1.5 axis gimbal for nema 17
thingiverse
free
Direct Drive Extruder MK8 by squareoctopus
...4 x 16mm hex-head screw
4 m4 x 20mm screw
1 m4 x 30mm screw
2 m4 x 12mm countersunk-head screw
1 compression spring
1 604 bearing
thingiverse
free
Stepper motor mount for 2020 extrusion by mrminhghi
...er motor mount for 2020 extrusion.
made for extruder motor mount.
mount with 2 m5 screw 6mm.
motor tighten with m3 screw and nut.
thingiverse
free
Y Axis Idler (Heavy-duty) by TK_DESIGN
...y axis idler (heavy-duty) by tk_design
thingiverse
for prusa i3 rework
parts
hex socket head cap screw
m3 x 20mm x 4
nut
m3 x 4
thingiverse
free
Removable Hemera VOLCANO Part Cooler for 5015 Radial Blower - V1.1 by NigelWest
... the stepper motor case by using too long screws or over tightening.
1 off m3x12 set screw - used to adjust the height of the fan
thingiverse
free
Extruder Motor Mount for 3030 Extrusion by thinngimaker
...y 3030 extrusion, you only need four m5x10 screws and 4 hammer nuts for mounting it to the frame.
(and of course an extruder kit)
thingiverse
free
Nema 17 Motor Mounting Bracket
...inch 6-32 machines screws and nuts should work as well
also note: you can use shorter (20 mm) length screws for two of the holes.
thingiverse
free
E3D Hemera Mount Kit for Duplicator i3 Plus by Mario_I
...o use a nylock nut then use an m4x18mm)
mounting bolts: two m4x12mm
button head hex m3x16mm, two m3 washers and one m3 nylock nut
Dahai8
thingiverse
free
40mm (4cm) 90° fan duct by DaHai8
...40mm (4cm) 90° fan duct by dahai8
thingiverse
'cause i needed one.
thingiverse
free
Twisting Flame for LED tealight by DaHai8
...scence!
modified weirdnoise's openscad file to open up the base and allow an ikea stöpen led tealight (4cm) to be put inside.
thingiverse
free
Simple Phone Holder by DaHai8
...988
but it's not a remix as i designed this from scratch, smaller, and less parts.
i love this bright (chinese) red filament!
thingiverse
free
A5 GoPro Mount by DaHai8
...ro adapter: https://www.thingiverse.com/thing:2546114
picam mount for a3 - gopro style: https://www.thingiverse.com/thing:2679030
thingiverse
free
Modified A5 Fan Duct by DaHai8
...
it's just a hack at this point, but works well on my printer.
i hope to design and post a better nozzle in the near future.
thingiverse
free
JGAurora/JGMaker A6 Mainboard Replacement STL files by DaHai8
... to a more user friendly mainboard and firmware.
please see my youtube video on how these are used.
https://youtu.be/yzken7_nima
thingiverse
free
Simple Phone Holder - v2 by DaHai8
... to accommodate the usb charging cable.
fits most standard sized smartphones (~5.5in), but can be scaled up/down for other sizes.
thingiverse
free
Bio-hazard Hub by DaHai8
...meter rod
the surface finish is poor because i'm still using rafts (for the pointy ends). hope to have some printbite soon...
thingiverse
free
Insta360 One R GoPro Extension 13mm offset by DaHai8
...ones :
https://youtu.be/dbfdbwcz4ji
you are free to make and use this thingi for your drones and your videos, but not to sell it.
thingiverse
free
AnyCubic Kossel Bed Clips by DaHai8
...0 t-nuts
6x m3x10mm hex head screws
highly recommend printing these in petg as pla will soften and warp from the heat of the bed.
Hypercube
turbosquid
free
HyperCube
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Hypercube 3D Model
...hypercube 3d model
3dexport
cube hypercube four-dimensional space side geometry edge
hypercube 3d model dmitry87 54991 3dexport
3d_export
$5
tesseract hypercube
...t it. moreover different textures and materials can be added and tesseract can be set in any scene. dimensions: x: 4m y: 4m z: 4m
thingiverse
free
Hypercube
...hypercube
thingiverse
hypercube projected into three dimensional space.
thingiverse
free
Hypercube by alpheccar
...hypercube by alpheccar
thingiverse
projection of an hypercube on an hypersphere.
thingiverse
free
Hypercube by BorisBlavasky
...hypercube by borisblavasky
thingiverse
hypercube. testing the tool.
thingiverse
free
Hypercube by Christian42
...hypercube by christian42
thingiverse
i made a hypercube using rhino3d
thingiverse
free
Hypercube by Christian42
...hypercube by christian42
thingiverse
i made a hypercube using rhino3d
thingiverse
free
HyperCube by wwebber
...hypercube by wwebber
thingiverse
this is the standard perspective projection of the hypercube from 4d to 3d
thingiverse
free
HyperCube scaled by Muzeem
...hypercube scaled by muzeem
thingiverse
customized hypercube
Evolution
3ddd
$1
Evolution
... evolution , комод
комод из каталога emmemobili модель evolution
design_connected
$18
Evolution
...evolution
designconnected
zanotta evolution computer generated 3d model. designed by ïto, ora.
design_connected
$11
Evolute
...evolute
designconnected
danese evolute computer generated 3d model. designed by crasset, matali.
design_connected
$22
Evolution
...evolution
designconnected
emmemobili evolution shelves and storage computer generated 3d model. designed by ferruccio laviani.
3ddd
$1
Zanotta / EVOLUTION
...zanotta / evolution
3ddd
zanotta
zanotta
884 evolution
3ddd
free
Simas Evolution
...simas evolution
3ddd
simas
раковина simas evolution
3ddd
$1
Lancer Evolution
...lancer evolution
3ddd
автомобиль , машина
lancer evolution viii
3ddd
$1
Zanotta Evolution
...zanotta evolution
3ddd
zanotta
современное кресло evolution фабрики zanotta
turbosquid
$25
Evolution Dragon
...d
royalty free 3d model evolution dragon for download as obj on turbosquid: 3d models for games, architecture, videos. (1212928)
turbosquid
$6
Flowers Evolution
...
royalty free 3d model flowers evolution for download as obj on turbosquid: 3d models for games, architecture, videos. (1214159)