Thingiverse
MXL Quick Release Belt Drive feeder. by ProtomakerSprint
by Thingiverse
Last crawled date: 3 years ago
MXL Quick Release Belt Drive feeder.
Quick Release Belt Drive feeder workshttps://youtu.be/L1bhO8OLWd8 via @YouTube
This belt feeder has worked very, very well but after some strong handed uses I discovered some parts will benefit from making stronger, I am working on this now.
If possible position the latch blot toward the front for easier access.
This belt slipping is after quite a lot of use.
Harder filament than PLA should work better
IMPORTANT !!!
I have been let down by the bolt supplier who indicated that it was possible to obtain M4 Hex head part threaded bolts. It appears that the smallest Hex head part threaded bolts are M5 size:-
I have modified the files to take a M5 x 45mm Hex "Part Threaded"** Bolt.
** Important Part Threaded to slide when unhooking the Quick Release :-
Modifications:-
a) Bigger hole for the M5 bolt in the longer "Pin"
b) Bigger grove for the M5 bolt in the "Push Plate"
c) Bigger Hex Hole for the M5 bolt head to latch into in the "Main Body"
Also file added "USE_Two_Bowdens_Hex_Bolt_Main_Body.stl" this has a
Bowden fitting on both input and output filament sides. This is ideal if you want to feed via a Bowden tube into this MXL Quick Release Belt Drive feeder e.g. from an enclosed box to help keep the filament dry. This has a small insert hole chamfer to make it easier to insert the filament. Sometimes when first inserting the filament it catches on the pushfit pneumatic connector. There are pass through versions of pushfit pneumatic connectors that may help stop this. This new design has a small chamfer into it for the filament that should help first insertion.
The "USE_Hex_Bolt_Main_Body.stl" file has more of a cone to feed filament into the MXL Quick Release Belt Drive feeder.
And some other improvements
This is a remix to :-
a) Make it a Quick Release Belt Drive feeder
b) Add a bit of style, e.g. Dragon Symbol.
c) Make it a bit thicker to add strength, not really needed from the original design
This is a remix feeder is strongly based on :-
Belt Feed MXL Belt Bowden Extruder 1.75mmhttp://www.thingiverse.com/thing:581170
The Dragon Symbol is from:-http://www.myminifactory.com/object/dragon-4543
I have made some changes that should improved this Quick Release Belt Drive system. Including making the quick release catch in the Main Body wider at the top to help the bolt head to be inserted.
These files/parts are supplied as is and so far as I can tell it should function. I have been only able to carry out some limited testing:-
Quick Release Belt feed first test print :-
Note the catching in this video, has been fixed with the "Thinner Main Belt Drive":-https://youtu.be/gEas7wuOfz8?list=PLUqt0sTiXUDfXiC6HzSiRrjF2sPHV-EEZ
Quick Release Belt Drive Feeder build assembly:-https://youtu.be/Ii-TJyDoklc?list=PLUqt0sTiXUDfXiC6HzSiRrjF2sPHV-EEZ
Please see the YouTube Play List Quick Release Belt Drive Feeding:-https://www.youtube.com/playlist?list=PLUqt0sTiXUDfXiC6HzSiRrjF2sPHV-EEZ
Notes on printing:-
"Main Body". Print with supports because of overhangs.
"Push Plate". Print with supports because of overhangs.
NB: "Push Plate " Note there is a left and a right hole for a 4mm bolt. The hole on the same side as the lug with the position for a inserted nut, (not needed), and the same side of the lever should be drilled to 4mm but the other hole should be only drilled to 3.5mm. This is so that the 4mm bolt can move, turn, freely on the side of the lever but will have to have the threads forced in on the other side so that it is very tight and this will stop it coming loose without the need for the inserted nut on the other "Push Plate" lug.
"Thinner Main Belt Drive". May need to be printed slower because of curves and belt teeth.
"Pins", print with brim because of height to diameter
Some Hardware information:-
The Drive Belt:-
76MXL025 95-Tooth 6.4mm Width Black Industrial Synchronous Timing Belt 7.6"
eBay seller : sellerbible
20 Tooth belt pinion : Plastic model may cause the drive belt to slip, I have not modified the plastic part. An aluminium 20 Tooth belt pinion is recommended.
Filament skateboard drive bearing:-
I tried a shallow groove bearing but believe this causes the filament to slip sometimes, as it does not press firm enough because of the groove. A normal skateboard, (no groove), works better for me after some testing of feeding 1.75mm Filament.
Knurl Nuts, to adjust the tension on the "Push Plate" NOTE Have to be M5 :-
Packs of 10 M4 M5 M6 NYLON THUMB NUTS without Collar (Coarse KNURLED)
m5 x 16mm Diameter
eBay Seller : atters153
eBay XTREME 10mm ALLOY SKATEBOARD BEARING SPACERS
Speed Rings + Axle Nuts + ABEC Speed Rings ... 8mm bore designed to perfectly align bearings.
eBay Seller : xtremesportandleisure-uk
Speed Rings fit on the inside part of the skateboard bearing and prevent the bearing outside rubbing, jamming, etc...
I have modified the files to take a M5 x 45mm Hex "Part Threaded" Bolt. Important Part Threaded to slide when unhooking the Quick Release
I have modified the "Main Body" to have a Hex Bolt head fitting that I hope should resolve this turning issue:-
** Quick Release Belt Drive Feeder One Tweak and improvement other issuehttps://youtu.be/TgToH-6afN8?list=PLUqt0sTiXUDfXiC6HzSiRrjF2sPHV-EEZ
IMPORTANT !!!
I have been let down by the bolt supplier who indicated that it was possible to obtain M4 Hex head part threaded bolts. It appears that the smallest Hex head part threaded bolts are M5 size:-
I have modified the files to take a M5 x 45mm Hex "Part Threaded"** Bolt.
** Important Part Threaded to slide when unhooking the Quick Release.
A redesign of ALL this model for M5 size bolt:-
a) Bigger hole for the M5 bolt in the longer "Pin"
b) Bigger grove for the M5 bolt in the "Push Plate"
c) Bigger Hex Hole for the M5 bolt head to latch into in the "Main Body"
*Part Threaded Shaft, is needed because this bolt needs to slide to hook or unhook for Quick Release, etc..
Other parts Hob Bolts, Skateboard bearings, normal 8mm washes, 4mm bolt for the "Push Plate", etc are generally available.
Part files:-
20_tooth_MXL_Motor_pulley.stl
USE_Hex_Bolt_Main_Body.stl
USE_Pins.stl
USE_Push_Plate_no_nut_needed.stl
USE_Thiner_Main_Belt_Drive.stl
I do not recommend this print 20_tooth_MXL_Motor_pulley.stl a 20 Tooth belt pinion : Plastic model may cause the drive belt to slip, I have not modified the plastic part. An aluminium 20 Tooth belt pinion is recommended.
Added these three files go togeter:-
Nut Grip for 12mm Bowden Tube Clamp 4mm tube.stl
12mm Bowden Tube Clamp 4mm tube.stl
Filament_Feeder_Belt_drive_Quick_Release_Two_12mm_Bowdens_Hex_Bolt_Main_Body.stl This has two 12mm threaded holes for the 12mm Bowden Tube Clamp 4mm tube with the Nut Grip for 12mm Bowden Tube Clamp 4mm tube on it.
Mk'2 is different, previously good but had a weak pln with the hole in, theses updated files are marked with Mk.2
.
Quick Release Belt Drive feeder workshttps://youtu.be/L1bhO8OLWd8 via @YouTube
This belt feeder has worked very, very well but after some strong handed uses I discovered some parts will benefit from making stronger, I am working on this now.
If possible position the latch blot toward the front for easier access.
This belt slipping is after quite a lot of use.
Harder filament than PLA should work better
IMPORTANT !!!
I have been let down by the bolt supplier who indicated that it was possible to obtain M4 Hex head part threaded bolts. It appears that the smallest Hex head part threaded bolts are M5 size:-
I have modified the files to take a M5 x 45mm Hex "Part Threaded"** Bolt.
** Important Part Threaded to slide when unhooking the Quick Release :-
Modifications:-
a) Bigger hole for the M5 bolt in the longer "Pin"
b) Bigger grove for the M5 bolt in the "Push Plate"
c) Bigger Hex Hole for the M5 bolt head to latch into in the "Main Body"
Also file added "USE_Two_Bowdens_Hex_Bolt_Main_Body.stl" this has a
Bowden fitting on both input and output filament sides. This is ideal if you want to feed via a Bowden tube into this MXL Quick Release Belt Drive feeder e.g. from an enclosed box to help keep the filament dry. This has a small insert hole chamfer to make it easier to insert the filament. Sometimes when first inserting the filament it catches on the pushfit pneumatic connector. There are pass through versions of pushfit pneumatic connectors that may help stop this. This new design has a small chamfer into it for the filament that should help first insertion.
The "USE_Hex_Bolt_Main_Body.stl" file has more of a cone to feed filament into the MXL Quick Release Belt Drive feeder.
And some other improvements
This is a remix to :-
a) Make it a Quick Release Belt Drive feeder
b) Add a bit of style, e.g. Dragon Symbol.
c) Make it a bit thicker to add strength, not really needed from the original design
This is a remix feeder is strongly based on :-
Belt Feed MXL Belt Bowden Extruder 1.75mmhttp://www.thingiverse.com/thing:581170
The Dragon Symbol is from:-http://www.myminifactory.com/object/dragon-4543
I have made some changes that should improved this Quick Release Belt Drive system. Including making the quick release catch in the Main Body wider at the top to help the bolt head to be inserted.
These files/parts are supplied as is and so far as I can tell it should function. I have been only able to carry out some limited testing:-
Quick Release Belt feed first test print :-
Note the catching in this video, has been fixed with the "Thinner Main Belt Drive":-https://youtu.be/gEas7wuOfz8?list=PLUqt0sTiXUDfXiC6HzSiRrjF2sPHV-EEZ
Quick Release Belt Drive Feeder build assembly:-https://youtu.be/Ii-TJyDoklc?list=PLUqt0sTiXUDfXiC6HzSiRrjF2sPHV-EEZ
Please see the YouTube Play List Quick Release Belt Drive Feeding:-https://www.youtube.com/playlist?list=PLUqt0sTiXUDfXiC6HzSiRrjF2sPHV-EEZ
Notes on printing:-
"Main Body". Print with supports because of overhangs.
"Push Plate". Print with supports because of overhangs.
NB: "Push Plate " Note there is a left and a right hole for a 4mm bolt. The hole on the same side as the lug with the position for a inserted nut, (not needed), and the same side of the lever should be drilled to 4mm but the other hole should be only drilled to 3.5mm. This is so that the 4mm bolt can move, turn, freely on the side of the lever but will have to have the threads forced in on the other side so that it is very tight and this will stop it coming loose without the need for the inserted nut on the other "Push Plate" lug.
"Thinner Main Belt Drive". May need to be printed slower because of curves and belt teeth.
"Pins", print with brim because of height to diameter
Some Hardware information:-
The Drive Belt:-
76MXL025 95-Tooth 6.4mm Width Black Industrial Synchronous Timing Belt 7.6"
eBay seller : sellerbible
20 Tooth belt pinion : Plastic model may cause the drive belt to slip, I have not modified the plastic part. An aluminium 20 Tooth belt pinion is recommended.
Filament skateboard drive bearing:-
I tried a shallow groove bearing but believe this causes the filament to slip sometimes, as it does not press firm enough because of the groove. A normal skateboard, (no groove), works better for me after some testing of feeding 1.75mm Filament.
Knurl Nuts, to adjust the tension on the "Push Plate" NOTE Have to be M5 :-
Packs of 10 M4 M5 M6 NYLON THUMB NUTS without Collar (Coarse KNURLED)
m5 x 16mm Diameter
eBay Seller : atters153
eBay XTREME 10mm ALLOY SKATEBOARD BEARING SPACERS
Speed Rings + Axle Nuts + ABEC Speed Rings ... 8mm bore designed to perfectly align bearings.
eBay Seller : xtremesportandleisure-uk
Speed Rings fit on the inside part of the skateboard bearing and prevent the bearing outside rubbing, jamming, etc...
I have modified the files to take a M5 x 45mm Hex "Part Threaded" Bolt. Important Part Threaded to slide when unhooking the Quick Release
I have modified the "Main Body" to have a Hex Bolt head fitting that I hope should resolve this turning issue:-
** Quick Release Belt Drive Feeder One Tweak and improvement other issuehttps://youtu.be/TgToH-6afN8?list=PLUqt0sTiXUDfXiC6HzSiRrjF2sPHV-EEZ
IMPORTANT !!!
I have been let down by the bolt supplier who indicated that it was possible to obtain M4 Hex head part threaded bolts. It appears that the smallest Hex head part threaded bolts are M5 size:-
I have modified the files to take a M5 x 45mm Hex "Part Threaded"** Bolt.
** Important Part Threaded to slide when unhooking the Quick Release.
A redesign of ALL this model for M5 size bolt:-
a) Bigger hole for the M5 bolt in the longer "Pin"
b) Bigger grove for the M5 bolt in the "Push Plate"
c) Bigger Hex Hole for the M5 bolt head to latch into in the "Main Body"
*Part Threaded Shaft, is needed because this bolt needs to slide to hook or unhook for Quick Release, etc..
Other parts Hob Bolts, Skateboard bearings, normal 8mm washes, 4mm bolt for the "Push Plate", etc are generally available.
Part files:-
20_tooth_MXL_Motor_pulley.stl
USE_Hex_Bolt_Main_Body.stl
USE_Pins.stl
USE_Push_Plate_no_nut_needed.stl
USE_Thiner_Main_Belt_Drive.stl
I do not recommend this print 20_tooth_MXL_Motor_pulley.stl a 20 Tooth belt pinion : Plastic model may cause the drive belt to slip, I have not modified the plastic part. An aluminium 20 Tooth belt pinion is recommended.
Added these three files go togeter:-
Nut Grip for 12mm Bowden Tube Clamp 4mm tube.stl
12mm Bowden Tube Clamp 4mm tube.stl
Filament_Feeder_Belt_drive_Quick_Release_Two_12mm_Bowdens_Hex_Bolt_Main_Body.stl This has two 12mm threaded holes for the 12mm Bowden Tube Clamp 4mm tube with the Nut Grip for 12mm Bowden Tube Clamp 4mm tube on it.
Mk'2 is different, previously good but had a weak pln with the hole in, theses updated files are marked with Mk.2
.
Similar models
thingiverse
free
12mm Bowden Tube Clamp 4mm tube by ProtomakerSprint
...ease_two_12mm_bowdens_hex_bolt_main_body.stlhttps://www.thingiverse.com/download:4113577https://www.thingiverse.com/thing:1662149
thingiverse
free
Leapfrog Xeed filament feeder modification by Goredox
...e connectors.
with this setup on the bench i can feed semi-flex through with the knobs. i have not tried printing with semi-flex.
thingiverse
free
Bowden extruder for 1.75mm filament and 1/8" push fit coupling (used for 4mm OD tubing) by sheffdog
...fit coupling, it now screws in perfectly straight off the printer, i also tapered the filament entrance to the push fit coupling.
thingiverse
free
Dry box Bowden guide by Sandow50
...t, i added a guide for 6mm od 4mm id tubes. the pass through threads require a 16mm hole and the pneumatic connector is 1/8 npt.
thingiverse
free
Compact Bowden Extruder, direct drive 1.75mm (Flexible Filament inlay) 4mm Tube, M5 pushfit by sobo84
...ment. works great for me.
maybe you have to cut it a little bit.
idler:
i glued anwasher with epoxid on it. it is just perfect!
thingiverse
free
Protomaker Black Sprint Original feeder WebCam stand off. by ProtomakerSprint
...tps://www.thingiverse.com/thing:1662149
webcam x carriage mount. hinged for webcam anglehttps://www.thingiverse.com/thing:2507097
thingiverse
free
Bowden tube feeder with filament release mechanism by 2by2
...m m4 bolds should be 50mm)
also included is a filament spool holder for extrusion bars
if you use it, please share a picture!
thingiverse
free
Filament Guide Direct Drive by DanChr89
...h 5,5mm drill bit, but i maybe think that its easier making m6 thread in them.
edit: 15-09-20
i uploaded a single push-in version
thingiverse
free
Drybox Filament Pass-Through
...
any comments and suggestions for improvements appreciated ;-)
feel free to remix, fusion 360 files are included in the download.
thingiverse
free
Makerbot Replicator upgraded filament drive tube mount by Marek123
...ke two m5 threads for quick change air connector. also drill dia 3-4mm holes for screws. printed holes are used as drill guides.
Protomakersprint
thingiverse
free
Marlin Inside Symbol by ProtomakerSprint
...marlin inside symbol by protomakersprint
thingiverse
marlin inside symbol
thingiverse
free
Octoprint Raspberry Pi Logo by ProtomakerSprint
...octoprint raspberry pi logo by protomakersprint
thingiverse
octoprint raspberry pi logo
thingiverse
free
Pie Shaped Piece curved wedge by ProtomakerSprint
...pie shaped piece curved wedge by protomakersprint
thingiverse
pie shaped piece curved wedge
thingiverse
free
Ribbon Cable Holder 2040 by ProtomakerSprint
...ribbon cable holder 2040 by protomakersprint
thingiverse
just ribbon cable holder 2040
e.g. pi camera cable holder
thingiverse
free
Humidity Removal Unit by ProtomakerSprint
...ld do.
humidity removal unit 3d print playlist on youtubehttps://www.youtube.com/playlist?list=pluqt0stixuddi0rbgkrowhanr9h22nuva
thingiverse
free
PCB Runner clips by ProtomakerSprint
... having quite a good grip.
ideal if need to adjust pcb edge distance away from something else.
single and doubles, adjust to fit.
thingiverse
free
SD Card Holder by ProtomakerSprint
...ndard +10 microhttps://youtu.be/jpvzpjpw_cu
remix of : sd card holderhttps://www.thingiverse.com/thing:2722882 by theswedishbear
thingiverse
free
Save the NHS by ProtomakerSprint
...op the new plans to dismantle our nhs. please share it.https://you.38degrees.org.uk/petitions/stop-the-plans-to-dismantle-our-nhs
thingiverse
free
Flux Thermal Paste Dispenser 3D Print by ProtomakerSprint
... raft
baised on dispenser for syringe of flux or solder paste by mordaha on thingiverse:https://www.thingiverse.com/thing:4549023
thingiverse
free
Motorola Moto G 3rd generation Tripod Mount by ProtomakerSprint
...g 3rd generation tripod mount
should suite any bigger backed phones
a video of this being 3d printed
https://youtu.be/qwuess8shqc
Mxl
3d_export
$600
mxl-2100 mineral fertilizer spreader
...al and organic.the work includes: original 3d models and drawings in kompas-16 and step. everything you need to start production.
3ddd
$1
Студийный микрофон Marshall
...marshall 3ddd marshall , микрофон студийный микрофон marshall electronics mxl ...
archibase_planet
free
Microphone
...planet microphone audio equipment musical equipment microphone marshall electronics mxl 2010 n081013 - 3d model (*.gsm+*.3ds) for interior 3d...
archive3d
free
Microphone 3D Model
...archive3d microphone audio equipment musical equipment microphone marshall electronics mxl 2010 n081013 - 3d model (*.gsm+*.3ds) for interior 3d...
3dfindit
free
MXL
...mxl
3dfind.it
catalog: kap componentes elétricos
thingiverse
free
MXL belt hold by cyryllo
...mxl belt hold by cyryllo
thingiverse
holder for mxl 6-7mm belt (use on simple tower xl)
3dfindit
free
Synchronous wheel MXL
...synchronous wheel mxl
3dfind.it
catalog: wuxing
thingiverse
free
Pinion 10t MXL by criz_me
...pinion 10t mxl by criz_me
thingiverse
.
thingiverse
free
MXL 990 microphone pop filter by chzdanish
...mxl 990 microphone pop filter by chzdanish
thingiverse
this is a pop filter designed for an mxl 990 microphone.
thingiverse
free
MXL Microphone 34mm Capsule Mount
... 34mm capsule mount
thingiverse
just changed the lower part of the original design to fit over the metal pin of mxl microphones.
Feeder
3d_export
free
Feeder
...feeder
3dexport
feeder.
3d_ocean
$7
bird feeders
...bird feeders
3docean
bird feeders wood
bird feeders
3d_export
$6
bird feeder
...bird feeder
3dexport
bird feeder
3d_export
free
Bird feeder
...feeder
3dexport
a beautiful, lovely and tranquil bird feeder, which you can use for your amazing games, animations, or pictures.
turbosquid
$59
Hummingbird Feeder
... free 3d model hummingbird feeder for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1444996)
turbosquid
$2
Baby Feeder
...y free 3d model baby feeder for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1488786)
archive3d
free
Bird feeder 3D Model
...r tray feeder
bird feeder n250714 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
turbosquid
$18
Pet feeder
...ee 3d model pet feeder for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1559898)
turbosquid
$3
dog feeder
... 3d model dog feeder for download as blend, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1545601)
turbosquid
$29
Chicken Feeder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Release
turbosquid
$39
Sofa. Updated release
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Film releasing mechanism
...asing mechanism for download as 3ds, ige, obj, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1227251)
3d_export
$5
shift lock release kia soul
...shift lock release kia soul
3dexport
shift lock release kia soul
turbosquid
$14
Quick release swivel carabiner with ring
...ease swivel carabiner with ring for download as sldpr and stl on turbosquid: 3d models for games, architecture, videos. (1668426)
turbosquid
$60
AUTOMATIC AIR RELEASE VALVE GRP33-07
...odel automatic air release valve grp33-07 for download as ipt on turbosquid: 3d models for games, architecture, videos. (1404884)
3d_export
$10
Kitchen Release Mat
...xture format: .png .jpg<br>resolution: 1024*1024<br>pbr in substance painter<br>formats: .obj .gltf .fbx .blend
3d_export
$5
logitech g27-g29 quick release
...r and the other wheel adaptor.<br>files are in stl format, but if you want to edit parts i give you files in sldprt format.
3d_export
$20
mutante veneno
...model created in zbrush 33cm ready for printing, previously release in 6...
3d_export
$5
Drowned Plush Minecraft
...for microsoft windows, macos and linux, and was later re-release for a wide variety of platforms. it is the...
3d_export
$7
Toy drone for kids
...drone for kids. based on only 3 d models. release for toy...
Belt
turbosquid
$9
Belt conveyor belt
...t conveyor belt for download as 3ds, ige, obj, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1226546)
3d_export
$6
belt
...d then comes off and fastens at the front of the seat. version: 2015 units: millimetres x-form: yes polys: 120 950 verts: 163 944
3d_export
$7
belt grinder
...belt grinder
3dexport
belt grinder
3d_export
$5
Belt conveyor
...belt conveyor
3dexport
belt conveyor
3ddd
$1
column belt
...column belt
3ddd
колонна
column belt
turbosquid
$5
Belt
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$5
Leather Belt
...ather belt is created in 3dsmax 2011 and rendered with vray 1.5 and it has all the texture included with the multiple obj format.
3d_ocean
$5
Belt Ring
...belt ring
3docean
belt jewelry ring
belt ring 3d model. total weight 3.5 gram & 1.1 stone size. 3dm and obj file format.
design_connected
$11
Belt Round
...belt round
designconnected
meridiani belt round computer generated 3d model. designed by parisio, andrea.
design_connected
$11
Belt Oval
...belt oval
designconnected
meridiani belt oval computer generated 3d model. designed by parisio, andrea.
Quick
3ddd
$1
Quick-Step / Quadra
...quick-step / quadra
3ddd
quick step
ламинат quick-step, серия quadra. сайт источник -http://www.quick-step.com
3ddd
$1
Quick-Step / Lagune
...quick-step / lagune
3ddd
quick step
ламинат quick-step, серия lagune. сайт источник -http://www.quick-step.com
3ddd
$1
Quick-Step / Classic
...quick-step / classic
3ddd
quick step
ламинат quick-step, серия classic. сайт источник -http://www.quick-step.com
3ddd
$1
Quick-Step / Arte
...quick-step / arte
3ddd
quick step
ламинат quick-step, серия arte. сайт источник -http://www.quick-step.com
3ddd
$1
Quick-Step / Vogue
...quick-step / vogue
3ddd
quick step
ламинат quick-step, серия vogue. сайт источник -http://www.quick-step.com
3ddd
$1
Quick-Step / Rustic
...quick-step / rustic
3ddd
quick step
ламинат quick-step, серия rustic. сайт источник -http://www.quick-step.com
3ddd
$1
Quick-Step / Eligna
...quick-step / eligna
3ddd
quick step
ламинат quick-step, серия eligna. сайт источник -http://www.quick-step.com
turbosquid
$3
Quick Ball
...lty free 3d model quick ball for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1521597)
3ddd
free
Quick-Step / Elite
... ламинат
ламинат quick-step, серия elite. сайт источник -http://www.quick-step.com
turbosquid
$10
Quick Chrome
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Drive
turbosquid
$90
Drive
...turbosquid
royalty free 3d model drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1654393)
3d_export
$10
cycloidal drive
...cycloidal drive
3dexport
cycloidal drive
3d_ocean
$5
Flash Drive
...h drive included : – materials – scene ( lighs / room ) – .c4d + .obj for any questions please feel free to contact me thank you.
3d_ocean
$5
Usb drive
...s shaders and a lighting setup. it also has a small animation of it going in and out. i saved it out as both a .blend file and...
3d_ocean
$5
Pen Drive
...est computer drive game model good low poly new pen pen drive textured unwrapped uv very low poly
a very beautiful low poly model
3d_ocean
$10
External hard drive
... is a detailed model of a trekstor external hard drive. you can easily modify the label on the top. simply edit the text objects.
turbosquid
$60
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1254314)
turbosquid
$50
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1263524)
turbosquid
$45
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1287060)
turbosquid
$40
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1261902)