Thingiverse
MV Agusta Turismo Veloce bags mounts by ale1717
by Thingiverse
Last crawled date: 3 years, 12 months ago
Those are wall mount for MV Agusta Turismo Veloce bags, designed to work exactly like the ones on your motorbike.
I printed them in PETG with 4 walls and 50% infill to be sure that they will last, probably it's way too much but you don't want your 1300€ bags to meet the floor.
Note that spacers are needed between the wall and the mounts, I added 6cm and 8cm wood spacers.
It's not convenient to print the spacers, either in term of material, resistance and time.
I printed them in PETG with 4 walls and 50% infill to be sure that they will last, probably it's way too much but you don't want your 1300€ bags to meet the floor.
Note that spacers are needed between the wall and the mounts, I added 6cm and 8cm wood spacers.
It's not convenient to print the spacers, either in term of material, resistance and time.