Sketchfab
Multiple Expression Mask - 3D Printable
by Sketchfab
Last crawled date: 2 years, 2 months ago
Random original mask design designed to be 3d printed.
Mask is 2.4mm thick with a hole about 200mm in diameter at the bottom to fit over the head (or at least my head, which is tiny). At the current size, it’s barely big enough to print on a CR10 in a single piece and minimal supports are required to print (I only put them in the eye and mouth holes) if you flip the helmet upside down and print the top against the buildplate. - Multiple Expression Mask - 3D Printable - Buy Royalty Free 3D model by afriedlander
Mask is 2.4mm thick with a hole about 200mm in diameter at the bottom to fit over the head (or at least my head, which is tiny). At the current size, it’s barely big enough to print on a CR10 in a single piece and minimal supports are required to print (I only put them in the eye and mouth holes) if you flip the helmet upside down and print the top against the buildplate. - Multiple Expression Mask - 3D Printable - Buy Royalty Free 3D model by afriedlander