Multi Widow - The Ultimate Tevo Black Widow Rework

Last crawled date: 5 years, 3 months ago

This rework is made for MGN12h linear guides on all 3 axes and also a Prusa Research MMU2S. The oversized plates on the ends of the gantry are a part of the outer Z wheel mod from 3dvice.co. The power supply the brackets are made to fit is a Meanwell 600-se-24. The mainboard tray is meant to hold an SKR 1.3 board and will accomodate 2 stepper driver expansion boards. I did this because I designed this to have 2 stepper motors driving each axis for 2x holding torque and also so that we are always pulling from the short side of the belt no matter the direction. MKS gen L might also fit. The touchscreen mount is meant to house a bigtreetech tft35 v3.0 screen that is switchable between a touchscreen and a lcd12864. The voltage display on the LH of the printer is a LM2596 step down converter sourced from ebay obviously with the display. For hardware i used a lot of m3x8 screws and sliding T slot nuts. I do not have any parts in here to hold the 2 z stepper motors or anything for the titan aero extruder. These were other people's awesome designs i downloaded and printed out from here. I do have a detailed build thread full of pictures showing all i have done with this printer since i bought it. That can be seen right here: https://3dprintboard.com/showthread.php?29112-370mm-X-250mm-X-300mm