MS-Delta Frame by Spaceman9105

Last crawled date: 3 years, 1 month ago

MS-Delta is a delta 3d printer designed to be printed by another 3d printer. Most of the frame is based on "My Delta printer" by Robkar(https://www.thingiverse.com/thing:923830).
20x20 Extrusions was used for the frame and 8mm steel rods for the sliders. As far as possible m4 cheese head Allen screws were used.
Included is the base model for the carriages used in the complete printer. The modified carriages is included in effectors designed for the printer. So when modify the base carriage if you are not using one of the designed effectors.
Parts list:
To print:
3 x Bed mount
3 x Top corner
3 x Bottom corner
6 x Rod holder
Various 2020 extrusion M4 inserts: https://www.thingiverse.com/thing:1573410
To buy:
76 x m4 12mm
16 x m4 14mm
12 x m4 8mm
78 x m4 bolts
3 x m3 25mm (idler pulley screw)
12 x m3 10mm (Motor mounting)
3 x 660mm 20x20 Aluminum extrusion
9 x 330mm 20x20 Aluminum extrusion
6 x 8mm stainless rods ~580mm long
GT2 Belt 6mm
GT2 16 tooth idler pulley 6mm
GT2 16 tooth driver pulley
Some small cable ties to mount endstops
250mm round glass bed
Electronics:
Ramps and arduino combo with stepper drivers
Nema 17 motors(I used 48mm 0.9°)
Power supply(I used an old CPU powersupply)
3 x endstops
Misc wiring
This is just the frame for the printer. Some feet for the printer was designed to lift it off the surface and leave room for electronics mounting. It also makes use of squash balls to provide grip and vibration absorbing.https://www.thingiverse.com/thing:2938145
I also designed an effector for the printer with its carriages. There has been a few versions. Effector V1 was designed and kinda worked but never really used therefor i am not even uploading it. It was my first attempt and found a lot of flaws.
Effector V2 was used as my first working effector. I used this effector to print some of my upgrade parts. It is working but some issues was still being experienced. https://www.thingiverse.com/thing:2938207
Effector V3 is my latest Effector and is in the process of being installed. It will have an outo bed leveling function and rods will be connected with magnets. https://www.thingiverse.com/thing:2938171