Thingiverse
MRI Brain Model by mri_brain
by Thingiverse
Last crawled date: 4 years, 8 months ago
This printed best on a Prusa MK3S+ using Cura and tree supports. Mostly default settings for the printer.
10% infill -- quarter cubic
.2mm layer height
215 nozzle temp
60 plate temp
Tree supports (40 degree tree support branch angle, 8 mm branch distance, 3 mm branch diameter, 5 degree branch diameter angle, .2 mm collision resolution, touching buildplate, 50 degree overhand angle, Zig Zag)
10% infill -- quarter cubic
.2mm layer height
215 nozzle temp
60 plate temp
Tree supports (40 degree tree support branch angle, 8 mm branch distance, 3 mm branch diameter, 5 degree branch diameter angle, .2 mm collision resolution, touching buildplate, 50 degree overhand angle, Zig Zag)