Thingiverse
Mr Plant Pot Guy by Conor001
by Thingiverse
Last crawled date: 4 years, 1 month ago
Happy little flower/plant pot guy.
Made up of lots of bits, which are then glued together.
Print the main pot in vase mode, with at least 2 or 3mm of base thickness. You can change filament to create nice effects. I used black for the first 5mm and the top 5mm.
The pot can be screwed to the legs with 3mm screws.
Superglue all the other bits on.
Place a plant in the pot. and enjoy :-)
Made up of lots of bits, which are then glued together.
Print the main pot in vase mode, with at least 2 or 3mm of base thickness. You can change filament to create nice effects. I used black for the first 5mm and the top 5mm.
The pot can be screwed to the legs with 3mm screws.
Superglue all the other bits on.
Place a plant in the pot. and enjoy :-)