MPCNC 525 - DWP611 WD Semi-Quick release adapter by WorkerDrone

Last crawled date: 3 years, 2 months ago

Remix of the DWP611 Quick Release for the MPCNC 525 version.
Fusion 360 Modelhttps://a360.co/2tDljw4
Prep-work.
Print all pieces and clean of course. For every hole that takes 4mm screws, predrill with 4mm bit. Likewise if using 5mm to attach to the tool mount, predrill with 5mm bit. Predrilling saves a lot of headaches. If using some other dimensions, then use what you have.
Hardware:
3x 4mm x 45mm - 1 for hinge and 2 for clamping the arm to the base.
6x 4mm x 25mm - 4 for the adapter and 2 for router support.
9x 4mm nuts - I recommend gluing the nuts in place to prevent the nuts from falling out. What I do is put some glue on the nut, place in position, secure with a screw and wait until dry. Remove screw and verify nut is secure.
10x 5mm x 25mm
10x 5mm nuts
To attach the MountAdapter I used 5mm socket head screws and nuts. Glued nuts in place as well.
As is no warranty! :)