Thingiverse
MP Select Mini Basic Tool Holder With Filament Guide by 77-17
by Thingiverse
Last crawled date: 4 years, 7 months ago
Basic MP Select Mini Tool Holder. Interchangeable parts.
Tested Fit.
Uses The Printers own Body screws.
Use Pull Tie if fit is loose on filament guide. (square corresponding holes)
Trim Ridges on filament guide pins if fit is tight.
Super Glue can be used to permanently fix the assembly.
A number of interchangeable kits will be available shortly
Settings for strength
Tested for fit.
Solid @ 30 mm/sec
8mm Shell, 100% fill
102% Extrusuion
3mm Retract
;MP model not intended for print.
;Additional Parts Pictured:
Spool Holderhttps://www.thingiverse.com/thing:2723805/zip
Cable Chain MK IIhttps://www.thingiverse.com/thing:2750840/zip
Tested Fit.
Uses The Printers own Body screws.
Use Pull Tie if fit is loose on filament guide. (square corresponding holes)
Trim Ridges on filament guide pins if fit is tight.
Super Glue can be used to permanently fix the assembly.
A number of interchangeable kits will be available shortly
Settings for strength
Tested for fit.
Solid @ 30 mm/sec
8mm Shell, 100% fill
102% Extrusuion
3mm Retract
;MP model not intended for print.
;Additional Parts Pictured:
Spool Holderhttps://www.thingiverse.com/thing:2723805/zip
Cable Chain MK IIhttps://www.thingiverse.com/thing:2750840/zip