Thingiverse
Mounting Brackets by wisestone
by Thingiverse
Last crawled date: 4 years, 6 months ago
I wanted to mount my soldering iron power supply underneath my work bench. To do this, I created two 3D printed mounting brackets. The brackets are of different widths. One is 20mm and the other is 45mm wide and have an inside measurement mounting height of 35mm.
The brackets are secured to the underside of the desk via 6g 15mm self-tapping screws.
My print is made in PETG 1.75mm Aurarum silver filament, with 0.2mm layer height and 25% infill on a PRUSA I3 MK3S printer.
I hope that you can find this print useful, too.
Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.
The brackets are secured to the underside of the desk via 6g 15mm self-tapping screws.
My print is made in PETG 1.75mm Aurarum silver filament, with 0.2mm layer height and 25% infill on a PRUSA I3 MK3S printer.
I hope that you can find this print useful, too.
Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.