Thingiverse
Mountable prototype PCB holder by sfcorrell
by Thingiverse
Last crawled date: 3 years ago
I have used 3 x 7 cm and larger thru hole prototype boards to build small circuits for some time. Recently I used them to assemble circuitry to drive a servo turnout motor (see servo mount under model trains on Thingiverse) on a friends model railroad layout and I needed to be able to screw (#4 or M3) the board to the underside of the layout. I designed the enclosed mount to do that, but it clearly could be used to mount the board in most any project.
Similar models
thingiverse
free
Servo Mount for LittleBits by TnaTmr
...crews. the wholes on the servo are actually for m4 screws however in my case m4 screws didn't fit properly. no need for nuts.
thingiverse
free
Anet A8 Servo Z-Endstop by KillerTurtle
...fan, and uses a micro servo. i have upgraded to a ramps 1.4 board to use the servo, and using marlin rc8, with abl bilinear set.
thingiverse
free
Swap-able Servo Mount by Moarmau5
...hot glue.
included are mounts for both 4g and 9g servos.
simply hot glue these mounts to the foam board, and screw in the servo!
thingiverse
free
9g Servo Surface Mount Bracket by osgibson
...ing servos on a foam board wing. v2 has thicker vertical posts and larger screw holes as v1 cracked when i screwed the servo in.
thingiverse
free
kk2.1.5 mounting board for X layout quadcopter by metshein
...kk2.1.5 mounting board for x layout quadcopter by metshein
thingiverse
kk2.1.5 mounting board for x layout quadcopter
thingiverse
free
prototype board bottom case with mount holes by AleyRobotics
...prototype board bottom case with mount holes by aleyrobotics
thingiverse
prototype board bottom case with mount holes
thingiverse
free
Board Camera Housing & Servo Tilt Mount by poboy
...don't need a pan servo (for a quadcopter or similar. update 1/14/14: updated the servo support file to thicken...
thingiverse
free
Turnout/Switch Under Table Servo Mount by nstrains10
...ugh the newly drilled hole up into the hole between the rails. i will post more pictures soon.https://youtu.be/8aht2o79rhm
enjoy!
thingiverse
free
Base for arduino duemilanove, small prototype board and 2 mounts for 28BYJ-48 and ULN2003 by DavidMcDermott
...ingiverse.com/thing:122305 with this board.
this thing is just a simple board to mount two 28byj-48 steppers and arduino board.
thingiverse
free
FPV250 Apm conversion board by vos262
...v250 apm conversion board by vos262
thingiverse
bridge to mount apm on hk fpv250.
use small washers and servo screws to mount.
Sfcorrell
thingiverse
free
5015 to 40mm Fan Adapters by sfcorrell
... fan with a m3 x 25 screw and nut, and the last one has a velocity stack, which may or may not increase air flow, just for grins.
thingiverse
free
Solder Spool Holder by sfcorrell
... using the craftware slicer in easy medium mode.
april 1, 2018
see improved design at https://www.thingiverse.com/thing:2821423
thingiverse
free
Rough Terrain Drink Holder by sfcorrell
...l also steady can drinks as well. i put holes in each foot so that if it is windy, you can use nails to secure it to the ground.
thingiverse
free
Money Tree by sfcorrell
... us kennedy half dollar coin and a “bow” to hold paper money.
i use the craftware slicer which i think is the best i have found.
thingiverse
free
Solder Spool Holder with Guide by sfcorrell
...diameter and a guide to better control the flow of the solder off the spool. please see original design for fabrication details.
thingiverse
free
Perry Suspender Rear Clip Lock by sfcorrell
... part i wear in black. i use craftware easy print medium with auto support, but there is nothing really critical about the part.
thingiverse
free
Rotary Tool Accessories by sfcorrell
... all the connections are screw type (no soldering required) and the motor and power supply units connect with the oe connectors.
thingiverse
free
Power Connector Housing by sfcorrell
...g with #2 x 3/8” sheet metal screws and the housing is connected to the base extrusions with m4 x 10 screws and m4 hammer t nuts.
thingiverse
free
Dial Indicator Mount for 2020 Extrusion by sfcorrell
.../18
i have included the step and igs files so that the part can be easily modified without the tedious conversion of the stl file
Mountable
turbosquid
$10
Mountable Building
...3d model mountable building for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1285672)
turbosquid
$10
Bridge Mountable
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
nvg mountable horns
...royalty free 3d model nvg mountable horns for download as stl on turbosquid: 3d models for games, architecture, videos. (1329386)
thingiverse
free
Wall Mountable Soap Dish
...wall mountable soap dish
thingiverse
wall mountable soap dish.
thingiverse
free
gopro mountable clamps by montygo
...gopro mountable clamps by montygo
thingiverse
gopro mountable clamps made in tinkercad
thingiverse
free
Mountable Racking Aid by PSomeone
...le racking aid, use a https://www.mcmaster.com/5862k163/ glued into provided holes to keep weapon secured during non use periods.
thingiverse
free
Wall mountable version by nastonrp
...wall mountable version by nastonrp
thingiverse
wall mountable version of main model.
quick and easy print.
thingiverse
free
Mountable Wine Rack by Bracyst
...mountable wine rack by bracyst
thingiverse
mountable wine rack able to hold wine glasses upside down.
thingiverse
free
Bearing (Mountable) by kovaloid
...id
thingiverse
just my test of mountable bearing.
size (inner/outer/height): 13/33/10 mm
maybe i will make different sizes later
thingiverse
free
mountable mask by ecasade2
...mountable mask by ecasade2
thingiverse
mask for little printers
Pcb
turbosquid
$19
PCB assembly line.
...mbly line. for download as 3ds, max, ige, obj, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1330649)
3ddd
$1
GRAMERCY HOME - CARMELA ARMCHAIR 602.023-PCB
...gramercy home - carmela armchair 602.023-pcb
3ddd
gramercy home
gramercy home
carmela armchair
602.023-pcb
www.gramercy-home.ru
3d_export
$150
auto pcb board loder inspection machine
...auto pcb board loder inspection machine
3dexport
auto pcb board loder & inspection machine --> only step file
3d_export
$7
turning mechanism drawing pcb board turnover machine
...turning mechanism drawing pcb board turnover machine
3dexport
turning mechanism drawing pcb board turnover machine
turbosquid
$9
Stereo Jack 3.5mm for soldering to a PCB
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
LED Right Angled PCB Mounting
...m led. step and igus files. multiple led colors: blue, purple, red, green, and yellow. dimensions case w 4,5mm , h 7,3mm l 6,4mm.
3d_export
$20
automatic pcb loading and unloading dispensing test automatic line
...ment structure is very complex. it is a very practical equipment for smt industry. the equipment is mature application equipment.
3d_export
$18
an automatic line for fct function test of pcb
... drawings are downloaded, you can directly watch and edit the contents. welcome to download and learn from your favorite friends.
3d_export
$5
USB Micro B connector
...step and igus for 3d import into ecad tools, pcb footprints. added also a altium designer pcb component library...
3d_export
$15
plastic housing with dewalt battery holder
...case measures 155x106x60. inside the case there are two pcb of 130x98 and 98x42...
Prototype
3ddd
$1
iphone (prototype)
...e (prototype)
3ddd
iphone prototype телефон сотовый прототип , iphone
iphone (prototype)
turbosquid
$60
prototype
...y free 3d model prototype for download as , fbx, stl, and obj on turbosquid: 3d models for games, architecture, videos. (1516333)
turbosquid
free
prototype
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Prototype Crossbow
...squid
free 3d model prototype crossbow for download as blend on turbosquid: 3d models for games, architecture, videos. (1237541)
turbosquid
$25
Atlas Prototype
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Prototype Airplane
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
starship prototype
...y manufactured in boca chica ,texas by spacex. this prototype consist features like forward flaps, bottom flaps and landing legs.
design_connected
$11
Jellyfish Chandelier (prototype)
...sakai design associate jellyfish chandelier (prototype) pendant lights computer generated 3d model. designed by toshihiko sakai.
turbosquid
free
Prototype Plasma Rifle
...d
free 3d model prototype plasma rifle for download as blend on turbosquid: 3d models for games, architecture, videos. (1237576)
turbosquid
$15
Prototype CNC Router
... model prototype cnc router for download as iam, ige, and stl on turbosquid: 3d models for games, architecture, videos. (1667298)
Holder
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.